Suchergebnisse für "Factsheet: Energietechnologien gestalten, die für alle sinnvoll und nutzbar sind"
IEA SHC Task 56: Newsletter 2 - November 2016
Schwerpunktthema des Newsletters ist das 2. Expertentreffen in Darmstadt. Zudem wird über eine Session zur Task 56 bei der 12. „Conference on Advanced Building“ in Bern berichtet.
Michaela Mair
Herausgeber: IEA-SHC Programm
Englisch, 2 Seiten
Downloads zur Publikation
Investigations on the Fundamental Suitability of Sprayed-on and Plaster-covered hygrothermic active Cellulose-Compact-Soundabsorber
Development of a new kind of spray-on and plastered noise absorber on the basis of cellulose from recycled paper. The absorber system preferably attenuates the low-frequency range, that can usually only be controlled with rather complex systems, and can also be used where conventional absorbers could cause problems due to impermissible water vapour condensation.
Integration of wind energy by load management
Simulation of optimal strategies to integrate wind energy in Austria and Germany under consideration of load management to maximize the resulting CO2-savings.
Integration by Cooperation
The aim of the project was to assess which forms and conditions of interaction can foster the integration of higher shares of distributed generation into the Austrian electricity grid.
Construction Elements and Building Materials for Buildings with High-Level Thermal Insulation - Technology, Building Physics, Ecological Rating, Costs (in Austria)
Catalogue of construction elements for buildings specified according to the passive house standard: proven elements and connections , examined for technical and physical reliability, with evaluated life cycle ecology. Cost assessments (for Austria). Guidelines for building contractors regarding airtightness, etc.
Green Biorefinery - Separation of Proteins from Grass Juice (Green Juice)
Research and development of the technical process to separate protein from grass juice to gain high-protein concentrate for animal feed by ultra-filtration and other separation technologies.
Multi-purpose apparatus for dedusting and ventilation of flue-gas from biomass-fired boilers
The multi-purpose apparatus is cheaper and requires less material and space. Less power consumption because of utilistion of the cyclone vortex in the induced draft fan.
Erfolgreiche Beispiele aus der Programmlinie Fabrik der Zukunft
Herausgeber: Bundesministerium für Verkehr, Innovation und Technologie (BMVIT)
Englisch, 36 Seiten
Downloads zur Publikation
DigiHemp/ Digital technologies for quality assurance and performance enhancement of hemp-based building materials
Development of digital methods for describing, predicting and optimizing the thermal/mechanical properties of composite materials made from bio-based raw materials. Taking into account the complex material morphology as well as the properties of the components for the prediction of building material properties, the overall goal of increasing the use of bio-based building materials shall be achieved.
V-Form – Manufacturing unreinforced vaulted concrete floors with variable pneumatic formworks
V-Form is working on the development of vaulted concrete floors in terms of structural design and building physics, as well as on a new formwork system. Thanks to the efficient shell construction, around 70% CO2eq-emissions can be saved compared to reinforced concrete flat slabs. The reusable and variable pneumatic formwork system aims to enable the economical production of the double-curved concrete shells.
InSite - Monitoring and evaluation of innovative demonstration buildings
In the "Stadt der Zukunft" and "Smart City Initiative" programmes, a large number of demonstration projects have been implemented in recent years. To be able to evaluate the developed innovations in a uniform and comparable form and to make the knowledge gained accessible to implementers, InSite subjects 10 selected objects from these programmes to energy and ecological monitoring as well as sociological surveys over a period of 24 months. The interpreted results are publicly available as a published study and as an interactive online platform.
RE-FORM earth - Earth Building for Building Sector Transformation
In order to promote the use of earth, the RE-FORM earth project is creating a planning basis for the construction of structures and buildings containing earth. In order to counter uncertainties regarding the health effects of earth building materials, a comprehensive program is being carried out to investigate radiation exposure and potential pollutants in earth. By erecting a temperature-controlled rammed earth wall in a test room with subsequent measurements, the aim is to determine the extent to which the material can contribute to healthy indoor air due to its moisture-regulating properties and help to balance out energy peaks.
Effective Comfort in a Climatic comfort house
Sophisticated implementation of different passive house-building services systems on a basis of four similar parts of a structure of multi-storey dwelling houses.
Neue Publikationen des IEA SHC Task 59/EBC Annex 76: Ganzheitliche Sanierung von historischen Gebäuden
Im IEA SHC Task 59/EBC Annex 76 wurden vier neue Publikationen rund um das Thema "Ganzheitliche Sanierung von historischen Gebäuden" veröffentlicht.
Aufarbeitung von Filterrückständen bei der Bierherstellung zur Gewinnung einer innovativen pharmazeutischen Substanz
Schriftenreihe
26/2007
C. Zeppelzauer, K. Kühne
Herausgeber: Bundesministerium für Verkehr, Innovation und Technologie
Deutsch, 43 Seiten
Downloads zur Publikation
TEA-PUMP – Techno-economic Analysis of Thermoelectric Modules for Efficiency and Performance Enhancement in Heat Pumps for Residential Buildings
The TEA-Pump project explores the innovative use of thermoelectric elements (TEM) in compression heat pumps to enhance their efficiency and performance. Through a comprehensive techno-economic analysis, promising heat pump (HP) configurations for use in urban multi-family housing are identified. The project makes a significant contribution to the decarbonization of heating and cooling supply and supports the development of climate-neutral cities through energy-efficient, future-oriented heat pump technologies.
KRAISBAU - Development of AI tools for a transformation to a circular economy along the life cycle of buildings
The BMK lead project KRAISBAU is a collaboration of 32 partners for the realization of a sustainable and circular construction industry. The project focuses on the development and implementation of AI-supported solutions in circular construction along the entire value chain. The knowledge gained is disseminated through factsheets, roadmaps and training courses with the aim of establishing scalable and efficient approaches for existing buildings.
Erstellung eines Konzeptes zur Entwicklung der "Dienstleistung Schmierung" zur Maximierung der Anlagenlebensdauer auf Basis von Ionischen Flüssigkeiten als Spezialschmiermittel
Schriftenreihe
05/2007
DI Dr. Michael Kotschan MBA
Herausgeber: Bundesministeriums für Verkehr, Innovation und Technologie
Deutsch, 43 Seiten
Downloads zur Publikation
TRADEMARKFarb&Stoff
From an idea to a trade product ready for marketing: Plant dyes for the textile industry.
VisErgyControl - Integral control system for daylight and artificial lighting for high visual and melanopic comfort with minimized primary energy consumption
Within the project VisErgyControl an integral, simulation-based, energy-efficient open loop daylight and artificial lighting control system had been developed. The research project focuses on the visual and melanopic requirements of users while minimizing the energy consumption for heating and cooling.