IEA Working Party on Fossil Fuels (WPFF)

The Working Party on Fossil Fuels (WPFF) is the advisory council for the IEA Committee on Energy Research and Technology (CERT) for the field of fossil fuels.

Factors which hinder and support the market introduction of innovative residential building concepts - an information offensive for planners and technology producers.

In order to actively increase the diffusion of innovative residential buildings, the results of currently available research were summarised to produce a "'diffusion campaign", directed at building planners, residential building contractors and selected technology producers.

IEA DHC Annex TS3: Hybrid Energy Networks, District Heating and Cooling Networks in an Integrated Energy System Context Guidebook

Hybrid energy networks, i.e. the integration of electricity, heat and gas networks, can make a decisive contribution to optimizing the energy system. The IEA DHC Annex TS3 analyses the potentials and challenges of hybrid energy networks from the perspective of the district heating / cooling system. This is including the analyses of relevant technologies and synergies, an assessment of the different methodological approaches and tools, the analyses of case studies as well as the development of suitable business models and regulations.

Integration of decentralised renewable energies in existing fossil district heating grids

Analysis of potentials as well as technical / economical and organisational solutions to integrate decentralised heating power production from renewables into existing fossil heating grids.

IEA FBC Implementing Agreement Fluidized Bed Conversion (working period 2017 - 2020)

The technology programme includes the collaboration, the exchange of relevant information and networking in the area of fluidized bed conversion of fuels applied for clean energy production.

Analysis of the high-quality wooden facade in extreme climates

The project "Alpine base Schiestlhaus on the Hochschwab, which was opened in 2005, represents a lighthouse project for the "House of the Future" programme as the 1st shelter in zero-energy house quality. After more than 15 years in operation, however, damages came to light. Within the framework of this project, analysis activities were carried out on the cause of damage as well as the development of new facade structures.

Circular Economy Compass (KLW-Komp)

The Circular Economy Compass project has developed a responsive online self-assessment tool for the circular economy in SMEs. Based on a theory-based evaluation scheme, it is be possible to determine a company's degree of preparedness for a circular economy at a reasonable cost. To this end, the tool has a computational logic that automatically generates a circularity score (KPI, Key Performance Indicator) based on the answers.

AR-HES-B – Energy storage, production and recovery of valuable substances in wastewater treatment plants

AR-HES-B develops technologically based concepts of municipal wastewater treatment plants in order to convert them from energy consumers into a hybrid energy provider, energy storage and a provider of resources. The concept enables wastewater plants to turn into an important platform in the regional energy and mass transfer.

Workshop: Will a smarter grid lead to smarter end users - or vice versa

3. - 4. June 2015
Oslo, NO

The workshop will focus on the potential benefits of smart grids for end-users and society at large, with the goal of identifying novel approaches and critical aspects for realising this potential as well as core R&D needs on this topic and similar areas that need attention.

Energy Flexible Buildings – Potential and Performance

26th September 2017, 10.00 a.m.
Kuppelsaal TU Wien, Karlsplatz, 1040 Vienna

The aim of this workshop was to bring together international experts and the Austrian building and demand response community for know-how exchange and discussion on the topic of energy-flexibility in buildings and its role for smart grids. The focus was on thermal and electricity based flexibility potential of buildings and practical experience with first implementations and demonstrations.

Direct Supply with Cold, Heat, Electricity and further Added Values Using Renewable Fuel for Stationary Fuel Cells

Fuel cells can use local resources and provide regional energy support if optimized. BIO-VISION leads to a demo-project.

INFINITE: INnovative FINancing models for sustaInable urban energy sysTEms

The goal of the INFINITE-project is to lay the foundations for a more wide-spread implementation of urban energy supply systems across buildings, using renewable energy sources produced in local supply units. At the same time the projects supports to reduce the demand for fossil fuels and higher-level energy infrastructure.

IEA EGRD Workshop: Technologies and innovations for the climate-neutral city

May 12–13, 2025
Vienna (Austria) and onlineDay 1: BMIMI, Radetzkystraße 2, 1030 Wien, Festsaal, Day 2: die HausWirtschaft, Bruno-Marek-Allee 5/1, 1020 Wien, NordbahnSaal

This workshop focused on how cities can achieve climate neutrality. The discussions centered on key factors for R&D policies to foster technologies and systemic innovations for sustainable and resilient urban development.

Excursions "Building of Tomorrow live"

Under the project "Building of tomorrow live" over a year long several excursions to "Building of tomorrow" demonstration projects and other passive houses were organised. Sightseeing opportunities were surveyed, updated several times and published on the web.

IEA HPT Annex 48: Industrial Heat Pumps, Second Phase

Industrial heat pumps enable the use of waste heat and increase the energy efficiency of industrial processes. The aim of this project was to provide comprehensive information on the successful application of industrial heat pumps and thus contribute to the further dissemination of this technology.

Product service systems without risk (RISP)

In RISP a process model for the development of product-services is worked out, which consists of seven steps and so called "gates" between the single steps. The questions which have to be answered before entering the gates to the next step are derived from a failure mode and the effect analysis of the single steps.

Transfer of technology and know-how for the initiation of fermentation gas net feed-in pilot projects.

Target group communication of the technical possibilities of fermentation gas net feed-in. Information preparation and reduction in planning complexity. Support and networking of potential future plant operators. Establishing a service office as contact point.

IEA FBC Implementing Agreement Fluidized Bed Conversion (working period 2020 - 2023)

The aim of the project is to continue to further develop the internationally very well accepted participation of Austria in the information network of the IEA Fluidized Bed Conversion (FBC) Technology Collaboration Programme (TCP) to optimize fluidized bed conversion of fuels applied to clean energy production (heat and power). All stakeholders will be included on a national as well as on a global level.

(energy central 400+) Marketable energy central from 400 kW with innovative, simple electricity conversion for residential building, public utility and commercial objects

Development of a marketable, decentralised "energy central" on a scale from 400 kW for the generation of electricity, heating (and cooling) for residential building, public utility and commercial objects, with a broad variety of applicable fuels on the base of regionally available biogenous residual materials.

IEA AFC Annex 34: Fuel Cells for Transportation (Working period 2026 - 2027)

With the market ramp-up of fuel cell electric vehicles (FCEVs), sustainable lifecycle management is gaining importance. This project investigates the end-of-life of these systems, focusing on disassembly, recycling, and recovery of critical materials like platinum. The analysis of a defective Hyundai ix35 Fuel Cell aims to identify causes of performance loss and develop methods for repair, reuse, and recycling.