Suchergebnisse für "Factsheet: Energietechnologien gestalten, die für alle sinnvoll und nutzbar sind"
IEA TCP Fluidized Bed Conversion (FBC). Working period 2013-2016
The Technology Collaboration Programme includes the collaboration, the exchange of relevant information and networking in the area of fluidized bed conversion of fuels applied for clean energy production.
i3 - Sustainable Food Management II
The project at hand is the continuation of the last years project of the same name. It is the aim of the project to develop an integrated, IT-based management model for a meat processing enterprise taking into account the value chain as well as the regional environment.
KELVIN - Reducing the urban heat island effect via improving the reflective properties of buildings and urban areas
The aim of this project was to estimate the potential to reduce urban heat islands via low-tech measures such as the variation of the surface albedo, using the City of Vienna as an example. The project has also assessed the energy savings and greenhouse gas emission reductions due to the decreased energy demand for cooling as a result of such measures.
Reconstruction ecological Freihof Sulz
integral reconstruction of the valuable cultural heritage "Freihof Sulz" to a communication- and action centre; Demonstration project for local culture and life quality, old building techniques, energy saving and ecological reconstruction."
Architecturally Diverse, Energetic Renewal
Post War Modernist Buildings Under Monument Protection. A Comparative Analysis of Energy Efficient Renewal Case study: Open Air School Franklinstrasse, Wien 21
SPIDER - Subtraction as a measure to Preserve and Insulate historic Developments by Electric Robots
The purpose of this exploration is to unlock the potential of autonomous, data-driven robots that achieve improvements of the thermal building performance through air entrapments in a continuous process.
IEA DHC Annex TS4: Digitalisation of District Heating and Cooling
The aim of the IEA DHC Annex TS4 is to identify the possibilities of digitalization and the integration of digital process for district heating and cooling. To this end, the Annex TS4 establishes a platform for industrial and scientific experts to strengthen international cooperation and networking and the exchange of experience of national research and development activities.
Direct Supply with Cold, Heat, Electricity and further Added Values Using Renewable Fuel for Stationary Fuel Cells
Fuel cells can use local resources and provide regional energy support if optimized. BIO-VISION leads to a demo-project.
SKIN - Concept for a product service system in the area of surface treatment
Development of a concept for a product service system (PSS) in the area of surface treatment (varnish, laquer, paint). Instead of selling varnish and pain, the service of surface treatment (per square meter) should be developed for private and commercial users.
IEA SHC Task 62: Solar Energy in Industrial Water and Wastewater Management
The main objective of IEA SHC Task 62 was to increase the use of solar thermal energy in industry, to develop new collector technologies and to open up industrial and municipal water treatment as a new area of application with high market potential for solar thermal energy. The focus was on thermal separation technologies as well as technologies for solar water decontamination and disinfection. By combining the technologies with solar collectors, an innovative and economically attractive overall solution should be created for integration into industry.
"Green Biorefinery - Utilitsation of Grass Fibres"
Basic properties of grass fibres from a green biorefinery will be investigated in order to have a sound base for comparison of grass fibres with other renewable fibres. Selected prototype-products with these grass fibres as main raw material source (e.g. insulation materials, gardening material, animal nutrition) will be developed, tested and evaluated whether they are technologically as well as economically feasible.
IEA SHC Task 61/EBC Annex 77: Integrated Solutions for Daylighting and Electric Lighting
Lighting accounts for around 15% of global electricity consumption - intelligent coordination of daylighting and electric lighting solutions together with integral lighting controls enable significant energy savings. At the same time, the solutions must be optimally planned in a user-centered approach based on the visual and non-visual effects of light. The task analysed user requirements as well as existing technologies and design methods and documented exemplary implementations in case studies.
Heat supply of development areas through supplementary solar supported near heat nets
Evolution of technical solutions for modular open ended near heat nets for development areas that are realized in several configuration levels. Adjusted solar heat and biomass solutions are supposed to be defined by modular construction and decentralized integration.
The Passive House in Practice
Strategies to open markets for passive houses in the east of Austria
Multi-Activ-Facade
Multi-Activ-Facade is a pre-manufactured, multifunctional panellised façade, which incorporates ventilation with heat recovery, passive house windows and photovoltaic for smart self-supply within retrofitting measures. The specific challenge is the application within social housing.
Ratgeber: Nachhaltige Gartenprodukte
Herausgeber: "die umweltberatung"
Deutsch, 26 Seiten
Downloads zur Publikation
Solarenergie Urban - Analysis and evaluation of the economic, energetic and architectural quality of urban solar energy buildings
This project developed energetic and economic optimised planning criteria for multi storey residential buildings for the integration of renewable energy systems in the building shell. The field of new construction and refurbishment had been investigated.
SüdSan - Socially acceptable, climate-compatible refurbishment of two multi-family-houses as a model for the refurbishment of the Südtiroler-Siedlung Bludenz
Planning, energetic-economic optimisation, construction and monitoring of the costs, comfort and energetic performance of two socially acceptable and climate-target-compatible refurbished smaller apartment buildings in the Südtiroler-Siedlung Bludenz.
Safety and Authorization of Biomass Gasification Plants
Biomass gasification is a success promising technology for the combined heat and power production based on the utilization of domestic biomass. With this project a safety and commissioning guideline for the technology was created for the enhancement of the technology's market introduction.
FABRIKregio - Development, test and spreading of models for the self-evaluation of sustainability at enterprise level under special consideration of regional successful factors
The project provides enterprises with a new self-evaluation model, which serves the purpose to support sustainable decisions. Focal point and innovation are: more active participation of the employees and better consideration of regional economic factors for success.