Suchergebnisse für "Factsheet%3A Energietechnologien gestalten%2C die f%C3%BCr alle sinnvoll und nutzbar sind"
Technologie Portrait Kraft-Wärme-Kopplung (Mai 2002)
Das Technologie Portrait bietet einem Fachpublikum ebenso wie der interessierten Öffentlichkeit ein kompaktes Querschnittsbild des Technologiebereiches Kraft-Wärme-Kopplung.
SmallWindPower@Home - Impact assessment of building-mounted small wind turbines on performance, people, building and environment
Within the project SmallWindPower@Home the impact of complex obstacles on the local flow pattern as well as on the inflow and the performance of different building-mounted small wind turbines (SWT) had been evaluated. Furthermore the effects of these building-mounted SWT on the building, the resident people and the direct environment were analysed.
IEA SHC Task 55: Integrating Large SHC Systems into DHC Networks
Despite the large potential for integrating large solar thermal plants into district heating and cooling networks, the share of solar heat worldwide is below 1%. The aim of this project was to analyse the technical, economic, and regulatory barriers that hinder a faster market development of such systems, and to propose solutions to support the growing heat market. The results (roadmaps, data, information) are available in the form of fact sheets.
"Leitbilder" in "energy regions" or how to co-ordinate technical change
In three Austrian regions, which call themselves "energy regions", the processes leading to the formulation of common visions or "leitbilder" is analysed and the impact is assessed such "leitbilder" can have on technical change on the regional scale. On this basis and with help of external consulters adapted communication and network strategies are developed and examined with regard to transferable elements.
Feasibility concept for a customer-focused and resource-efficient production of wood-products, considering a parquet factory as an example
An innovative approach aiming higher resource-efficiency and added value by using new quality standards and production systems in parquet industry. A customer friendly product will be possible by combining industrial production methods with the flexibilty of a manufacture.
Biotope City - construction manual for the green city of the future
"Biotope City" is an overall concept for the implementation of comprehensive urban greening with the aim of using the regenerative mechanisms of nature. With this approach, quality of life is to be comprehensively, sustainably and cost-effectively increased and resilience against extreme weather events in cities will be improved. The project aims to generate realistic components of a "construction manual" for the green city of the future, which are generalizable and transferable.
Forum Econogy 2016
22. September 2016
Science Park 3 - Johannes Kepler Universität Linz, Altenberger Straße 69, 4040 Linz
Europaweit wird nach dem Pariser Abkommen an neuen Strategien zur Forcierungder Energiewende gearbeitet. Wie diese auf Landes- bzw. Bundesebene aussehen,wird im diesjährigen Forum Econogy das Thema sein.
GREENsChOOLENERGY - Development and practical implementation of sustainable solutions for urban hotspots in combination with greening / PV / water
Use of the synergetic effects in the construction of photovoltaic, greening and irrigation systems at the location of HTL1 Klagenfurt Lastenstraße, to optimize the yield of experimental photovoltaic elements and at the same time reduce urban heat islands.
SmartCity Baumgarten - Demonstration of an anergy network and implementation of climate-friendly solutions in existing districts
Implementation of a cross-property anergy network for the supply of heating, cooling and electricity in an existing neighbourhood. With this demonstration project, a technical-legal alternative for areas outside of district heating supply is developed, which makes it possible for neighbourhoods to join together to use renewable energies in common.
"gugler! build & print triple zero" - subproject 3: recyclable constructing
Development of basic principles and proposals for highly recyclable constructions. A catalogue with main principles of recyclable designing with a particular focus on material inherent bonding and joint techniques as well as a selection of constructions including ecological benchmarks, calculation of building physics plus costs was created.
Edible Seestadt - Green Seestadt - Learning for the Edible City of the Future
"Edible Seestadt" ("Essbare Seestadt") identifies which contributions an edible city provides for a climate-neutral resilient district and how this contribution can be sustainably stabilized and optimized.
IEA EV Task 52: EVs and Circularity
Electric vehicles have specific challenges to reach circularity, which must be identified and solved adequately. Circularity issues are relevant in all phases of the life cycle – production, use and end of life – so circularity is strongly linked to Life Cycle Assessment (LCA) of electric vehicles. Austria leads this task and is responsible for the scientific assessment of circularity in LCA. Relevant case studies for the Austrian industry are analysed and the national R&D demand is identified.
Green BIM - Green building infrastructure as part of BIM-based planning and maintenance
Fusion of greenery and BIM planning to achieve a friction-free conducting and maintenance. By analysing the case studies, “Green BIM” examined to what extent typical steps in planning regarding greened buildings can be edited by characteristic software programs in a BIM-equitable way. The expected outcomes are supplements to international standards for data structures in civil engineering (IFC / ISO 16739) which are further on added to BIM applications by the software industry.
Windenergie In Österreich
Voraussetzungen, Situation, Bewertung, Perspektiven
Forschungsforum
1/1995
Herausgeber: BMVIT
Deutsch, 6 Seiten
Downloads zur Publikation
ZERMET - Zero Emission Retrofitting For Existing Textile Plants
Minimisation of the consumption of water, chemicals and energy in the textile industry. Further development of the ZERMEG approach in the form of a questionnaire and application in the textile industry.
IEA SHC Task 68: Efficient Solar District Heating Systems (Working period 2022 - 2024)
Regarding the use of CO2-free technologies for local/district heating systems, solar technologies in particular offer an efficient option. In this task, the opportunities and challenges are investigated in order to efficiently provide the required temperatures necessary for local/district heating networks through solar technologies, to promote digitalisation, to identify new business models and measures for cost reduction, and to spread the knowledge about the potential of solar district heating systems.
IEA SHC Task 56: Building Integrated Solar Envelope Systems for HVAC and Lighting
IEA SHC Task 56 focused on the critical analysis, simulation, laboratory testing and onsite monitoring of envelope systems entailing elements that use and/or control incident solar energy. The central task was the integration of HVAC and lighting systems into a building’s Solar Envelope solution through a systemic approach.
IEA 4E EMSA: Policy Brief "Digital Technologies for Motor Systems" (2022)
Dieser Policy Brief beinhaltet eine Kurzfassung des EMSA Berichts zur Klassifizierung von Digitalisierungstechnologien in elektrischen Motorsystemen.
Konstantin Kulterer
Herausgeber: Österreichische Energieagentur, 2022
Englisch, 2 Seiten
Downloads zur Publikation
Salzburg:KanS - Salzburg: Climate-neutral city
Salzburg:KanS aligns the vision and climate protection goals of the city of Salzburg with the climate neutrality targets of the province and estimates the sector-specific CO2 reduction contributions until 2030. Based on these contributions, the project develops implementation strategies for the entire city as well as the focus areas of “climate-neutral mobility” and “climate-neutral neighborhoods”.
IEA SHC Task 67: Compact Thermal Energy Storage Materials within Components within Systems
This Task aims to push forward the compact thermal energy storage (CTES) technology developments to accelerate their market introduction through the international collaboration of experts from materials research, components development and system integration. These technologies are based on the classes of phase change materials (PCM) and thermochemical materials (TCM). Materials from these classes will be studied, improved, characterized and tested in components.