Suchergebnisse
Factory of Tomorrow
Applying the principles of sustainability will contribute to securing our prosperity and quality of life in the long run. The orientation towards sustainability not only contributes to relieving the environment, it also opens up completely new opportunities for the economy. It helps to develop more intelligent and more efficient solutions and products to meet our needs and, at the same time, to save on energy and raw materials.
Newsletter aus allen open4innovation Bereichen
Unsere Newsletter informieren regelmäßig über aktuelle Ausschreibungen, spannende Veranstaltungen und herausragende Projektergebnisse. Die digitale Broschüre "energy innovation austria" gibt unter anderem Einblick in die österreichische Energieforschung. Auch für die Aussendungen des BMIMI "Aktuelles aus Energie- und Umweltforschung" können Sie sich registrieren (Link zur Anmeldung speziell dazu s. unterhalb der Box).
Themen
MeteoR – mechanical-thermochemical process combinations for the recycling of fine fractions from waste treatment facilities
In waste treatment plants large quantities of fine fractions are generated. Due to their heterogeneity and properties, these fractions are currently not used although they contain a whole range of materials that represent valuable resources. The aim of the project MeteoR is to enable the utilization of all components (mineral, metallic, and combustible) of fine fractions by combining mechanical and thermochemical processes, to close material cycles and to significantly contribute to the further development of the Austrian circular economy and the reduction of CO2 emissions.
DeB-AT – Detection and separation of portable batteries from mixed waste using sensor technology and artificial intelligence
The DeB-AT project plans the development of a laboratory or pilot plant demonstrator for the targeted separation of batteries from mixed waste streams. The concept of the demonstrator follows the methodological elaboration of the necessary requirements of optical sensors and the separation technology for AI-supported detection of the general population of batteries.
DiRecT – Direct recycling and upcycling of titanium chips
In the project DiRecT, different new technologies will be developed and evaluated which make it possible to directly recycle the chips generated in the manufacturing process of high-quality titanium products or to produce directly from the chips near-net-shape components or improved semi-finished products (upcycling).
CE4ALL – Circular economy for all – Incentives, enablers and inhibitors for sustainable consumption
Based on an analysis of current milieu-specific consumption behavior, the CE4ALL project aims to identify sector-specific incentives and enablers for strengthening the circular economy and to uncover inhibitors. Another focus of this work is the consideration of inclusion aspects. CE4ALL is working on a consumption-centered investigation beyond the previously production-oriented considerations of the circular economy.
IRONER - Potential for innovative and sustainable recycling of steel
Within the framework of the IRONER project, open questions were identified and the necessary innovations for increased steel recycling were developed. In addition to a material flow analysis, stakeholder interviews and ecological and economic considerations, the influences of increased steel recycling on metallurgical processes and material properties of steel products were examined.
FIVA - Fensterprototypen mit integriertem Vakuumglas
Das gegenständliche Projekt widmet sich der Fortentwicklung von Fenstern mit Vakuumgläsern. Vakuumgläser zeichnen sich durch sehr niedrige Ug-Werte und sehr schlanke Glasstärken aus und stellen damit eine neue Alternative für die Hebung des Energieeffizienz-Potentials von transparenten Bauteilen der Gebäudehülle dar. Im Projekt wird auf Erfahrungen hinsichtlich verschiedener Aspekte aus vorangegangen Sondierungsprojekten zurückgegriffen und mit Wirtschaftspartnern an der Realisierung von Funktionsprototypen gearbeitet.
FIVA - Window prototypes with integrated vacuum glazing
This project targets the further development of windows with integrated vacuum glazing. Such glass products regularly feature a very low Ug-value, and their dimension is in comparison to insulation glass thin and light. As such, these products offer a new alternative for highly-insulating window constructions, and thus also for energy-efficiency measures in buildings. The project is based on the findings of a previous exploratory project (MOTIVE) and focuses on the construction of functional prototypes of vacuum glass windows together with business partners.
DRoB - Drohnen und Robotik für effizientes Monitoring und Pflegemanagement von Gebäudebegrünungen
Strategische transdisziplinäre Expertenvernetzung zur Analyse innovativer Monitoring und Pflegesysteme für Gebäudebegrünungen. Ziel ist das Aufzeigen der Potenziale unterschiedlicher UAV-Sensoren für das Vegetationsmonitoring sowie von Roboter für die Pflege von Bauwerksbegrünungen.
DRoB - Drones and robotics for efficient monitoring and management of green facades or roofs
Strategic transdisciplinary networking of experts for the analysis of innovative monitoring and management systems for green facades and roofs. The aim is to demonstrate the potential of different UAV sensors for vegetation monitoring and robots for maintenance measurements of green façades.
RERA-pro - Integrierte Reststoff Bioraffinerie – Hochwertige Produkte aus Biomüll herstellen. Ganz ohne Emissionen
Im Projekt RERA-pro wird die heterotrophe Algenfermentation in eine Biomüll-Biogasanlage mit Gärrestaufbereitung integriert. Dadurch wird eine integrierte Reststoff Bioraffinerie geschaffen, die hochwertiges Protein für Aquakulturen wesentlich kostengünstiger als bisher zur Verfügung stellt.
3DFabBio - Maßgeschneiderte 3D gefertigte Produkte aus bio-basierten erneuerbaren Rohstoffen
Das Ziel des 3DFabBio-Projekts ist die Etablierung einer neuen Klasse, auf nachwachsender Chemie aufbauenden, Formulierungen für lichtbasierte 3D Druckverfahren. Die zurzeit kommerziell erhältlichen Formulierungen für Lithographie-basierte additive Fertigungstechnologien (L-AMTs) basieren hauptsächlich auf petrochemischen Produkten der Lackindustrie.
Herstellung von Biosensoren zur Detektion von Antibiotika – „AquaNOSE"
Das Projekt AquaNOSE beschäftigt sich mit der Umsetzung neuer innovativer Konzepte und Ideen aus Nanotechnologie, additiver Fertigung und mikrofluidischen mikroelektronischen Systemen (µf-MEMS) und übersetzt diese in geeignete Produktionsprozesse der industriellen Fertigung.
Projekt PIONEER
Prozessüberwachung und Recycling von biogenen Verbundwerkstoffen mit Funktionsintegration für Flugzeuginnenausstattungen. Um die Nachhaltigkeit im Bereich von Composite Werkstoffen zu erhöhen werden im Projekt unterschiedliche Technologien entlang eines Produktlebenszyklus untersucht, um deren möglichen Beitrag zur Ressourcenschonung zu ermittelt. Dazu unter anderem Materialien, die durch Nutzung vorhandener Landwirtschaftlicher Abfälle hergestellt werden können, hinsichtlich deren Einsetzbarkeit in Flugzeugkabinen.
CircuPack - Recyclable materials for food packaging with a low ecological footprint
The goal of the project is to develop sustainable and environmentally friendly food packaging with an improved ecological footprint. It is important to develop a new process control that ensures both food compatibility and the sustainability of the resulting product.
Strategien & Technologien
Hier finden sie einen Überblick über die nationalen, europäischen und internationalen Strategien zum Thema Energie und Umwelttechnologien.
PolyBacTex - Converting mixed textile waste into recycled fibres and cellulose for sustainable production
The project PolyBacTex is developing a solution for recycling of used mixed textiles by chemically separating and biotechnologically upgrading the individual fibre types (cellulose and polyester). This allows cellulose fibres to be recovered and returned to the fibre production process.
Wirtschaftlichkeits- und CO2-Bewertung ausgewählter biomassebasierter Energieträger für Österreich (BIOWERT)
Beitrag zur Dekarbonisierung 2040