Suchergebnisse
digiactiv - digital transformation for more interactivity in MEP-(mechanical, electrical and plumbing-)planning
The aim of the digiactiv project was to improve the interoperability between the different stakeholders in the building construction sector using open and neutral semantic data models. With digital transformation processes, digiactiv helps to increase the quality of planning and the operation of buildings, as well as to minimize the interface risk between various stakeholders.
CHALLENGE - Hocheffiziente Heißgas- und Abwärmenutzung in Luft/Wasserwärmepumpen für Plus-Energie-Gebäude und -Quartiere
CHALLENGE zielt darauf ab, das Konzept für Luft/Wasser-Wärmepumpen weiterzuentwickeln, dass diese hocheffizient in dicht bebauten, urbanen Gebieten eingesetzt werden können. Konkret soll mittels validierter Simulationen sowie eines Funktionsmusters des Gesamtsystems im Labormaßstab der Nachweis erbracht werden, dass 10% an elektrischer Energie eingespart, der Schall der Außengeräte im Sommer auf ein Minimum reduziert, sowie die Bildung lokaler Hitzeinseln vermieden werden kann.
CHALLENGE - Highly efficient use of hot gas and waste heat in air/water heat pumps for plus-energy buildings and quarters
CHALLENGE aims to further develop the system concept for air-to-water heat pumps in such a way that they can be used efficiently and without the above mentioned negative effects in densely built-up urban areas. In concrete terms, validated simulations and a functional model of the overall system on a laboratory scale are to be used to demonstrate that the concept can save 10% of electrical energy, reduce the noise of outdoor units in summer to a minimum and prevent the formation of local heat islands.
RENEWnow - Neue Impulse für die hocheffiziente energetische Sanierung von Geschoßwohnbauten und Quartieren
Sondierung eines innovativen Lösungsansatzes für die hocheffiziente Sanierung von Mehrfamilienhäusern in Österreich. Das Ziel ist durch einen gezielten, neuartigen Mix aus technischen und nichttechnischen Maßnahmen ein neues Dienstleistungsmodell (One-Stop-Shop) für Hausverwaltungen und Eigentümergemeinschaften zu entwickeln.
RENEWnow - New impulses for the highly efficient energetic renovation of multi-storey buildings and districts
Exploration of an innovative approach for the highly efficient renovation of apartment buildings in Austria. The aim is to develop a new service model (one-stop shop) for property managers and owner associations through a targeted, novel mix of technical and non-technical measures.
energy innovation austria
Aktuelle österreichische Entwicklungen und Beispiele für zukunftsfähige Energietechnologien
Stadt der Zukunft – Auf dem Weg zum Plus-Energie-Quartier
Das Technologieprogramm „Stadt der Zukunft“ verfolgt die Mission, durch Erforschung und Entwicklung von Technologien, Systemintegration, neuen Lösungen und mithilfe der Digitalisierung die Umsetzung von Plus-Energie-Quartieren zu ermöglichen. Im Mittelpunkt stehen innovative Technologien und Konzepte der Energieerzeugung, -verteilung, -umwandlung und -speicherung, aber auch der Verbrauchsoptimierung in Gebäuden und Gebäudeverbänden sowie Technologien und Effizienz für Neubau und Sanierung.
Sophokles - Solar shading lamellas with photovoltaic coating for climate-neutral, energy-efficient structures
Development of lightweight, strip-like photovoltaic modules that combine shading and emission-free power generation in one monolithic component. The size and module voltage of the photovoltaic blinds can be individually adapted to the conditions of the building. The core of the innovation is an interconnection concept for thin-film solar cells, with which the film-like photovoltaic material can be interconnected in series and in parallel as required.
TwinLight - BIM-basierte Umsetzung von Tages- und Kunstlichtsteuerungen
Eine Zusammenführung gewerkspezifischer Systeme im integralen Kontext, eine schnellere Anwendbarkeit neuer IKT-Technologien, eine Automatisierung bauseitiger Inbetriebnahmen von Steuerungen und eine Abbildung von Energiedaten im digitalen Zwilling sollen mittels Übertragung der Steuerungslogik in das digitale Gebäudemodell und über eine offene bidirektionale Systemarchitektur (BIM2Control und Control2BIM) möglich werden.
TwinLight - BIM-based implementation of daylight and artificial lighting controls
A merging of trade-specific systems in an integral context, a faster applicability of new ICT-technologies, an automation of on-site commissioning of control systems and a mapping of energy data in the digital twin are to be made possible by means of transferring the control logic into the digital building model and via an open bidirectional system architecture (BIM2Control and Control2BIM).
ColorProtect - Biobasierte Farbpigmente mit Filmschutzeffekt
Viele Mikroorganismen sind in der Lage ein breites Spektrum an Farben als sekundäre Stoffwechselprodukte zu produzieren. Die Holzforschung Austria beschäftigte sich im Forschungsprojekt „ColorProtect“ damit, Pilz-produzierte Pigmente zu isolieren und in Lasuranstriche einzuarbeiten, mit dem Ziel, bisher verwendete synthetische Pigmente in Lacken zu ersetzen.
Klett-TGA - Entwicklung von Klett - Befestigungssysteme für die Technische Gebäudeausrüstung
Ziel dieser Sondierung ist eine Systemveränderung bei der Montage der TGA, welche zukünftig einen universelleren Einsatz von Klett ermöglicht.
AR-AQ-Bau - Einsatz von Augmented Reality zur Abnahme und Qualitätssicherung auf Baustellen
Ziel dieses Forschungsprojektes ist die Entwicklung eines baustellentauglichen Augmented-Reality-(AR)-Systems inklusive eines Remote-Expert-System und eines BIM-Closed-Loop Datenübertragungssystem zur Verbesserung der Bauqualität, Gebäudesicherheit und Energieeffizienz sowie zur Effizienzsteigerung im Baucontrolling.
AR-AQ-Bau - Use of Augmented Reality for acceptance and quality assurance on construction sites
The aim of this research project is the development of a construction site-suitable augmented reality (AR) system included a Remote-Expert-System and a BIM-Closed-Loop data transfer system for improving the quality of construction, building security and energy efficiency as well as increasing the efficiency of construction investigation.
Green BIM - Bauwerksbegrünung als Teil BIM-basierter Planung und Pflege
Verschmelzung der Begrünungs- und BIM-Planung zur friktionsfreien Planung, Ausführung, Umsetzung und Pflege. Durch die Analyse der Fallbeispiele wurde geprüft, inwieweit für die Gebäudebegrünung typische Planungsschritte mit branchentypischen Softwareprodukten BIM-gerecht bearbeitet werden können. Als Ergebnis wurden Ergänzungen im internationalen Standard für Datenstrukturen im Bauwesen (IFC / ISO 16739) angestrebt.
Green BIM - Green building infrastructure as part of BIM-based planning and maintenance
Fusion of greenery and BIM planning to achieve a friction-free conducting and maintenance. By analysing the case studies, “Green BIM” examined to what extent typical steps in planning regarding greened buildings can be edited by characteristic software programs in a BIM-equitable way. The expected outcomes are supplements to international standards for data structures in civil engineering (IFC / ISO 16739) which are further on added to BIM applications by the software industry.
Circular Economy Summit Austria 2024
28. May 2024
Expedithalle, Absberggasse 27, 1100 Vienna
The event aims to discuss best practice policies from European countries and facilitate the exchange between decision makers.
Leitprojekt INNERGY (Tirol): Inntalfurche - Umsetzungsbeispiele der Flexibilisierung von Energiesystemen
Das Fernwärmesystem im Umfeld einer Versorgung mit volatilen erneuerbaren Energien soll durch Steigerung von Effizienz und Flexibilität und der Integration von Prosumern fit für die Zukunft gemacht werden.