Suchergebnisse
Road-to-Road/ Verschränkung neuartiger Methoden zur effizienten „Road-to-Road“ Inwertsetzung von Altasphalt
The planned combination of experimental and model-based methods for assessing/describing the behavior of asphalt shall enable the goal-oriented optimization of the performance/durability of recycled asphalt, with the resulting positive effects (CO2 balance, transport distances, landfill volume) being quantified within the project.
RE-FORM earth - Earth Building for Building Sector Transformation
In order to promote the use of earth, the RE-FORM earth project is creating a planning basis for the construction of structures and buildings containing earth. In order to counter uncertainties regarding the health effects of earth building materials, a comprehensive program is being carried out to investigate radiation exposure and potential pollutants in earth. By erecting a temperature-controlled rammed earth wall in a test room with subsequent measurements, the aim is to determine the extent to which the material can contribute to healthy indoor air due to its moisture-regulating properties and help to balance out energy peaks.
EPIKUR – Energy efficiency potential of intelligent measures of urban densification
The present research proposal focused on the possibility, implications and consequences of "inwards urban expansion" through densification of the existing urban tissue. In this context, densification is not only approached through known and common aspects of building regulations and guidelines, but in view of what is actually possible to achieve.
ENUMIS - Energetische Auswirkungen von Urban Manufacturing in der Stadt
Das Projekt beleuchtet die Herausforderungen von Urban Manufacturing (UM) aus Energiesicht und zeigt Chancen auf, die sich durch eine Umsetzung von UM-Konzepten in Hinblick auf die Konzeption nachhaltiger Energiesysteme für Städte ergeben.
ENUMIS - Energetic effects of urban manufacturing in the city
The project examines the challenges of urban manufacturing (UM) from the energy perspective and shows opportunities arising from the implementation of UM concepts for the future design of sustainable energy systems for cities.
FunkyNano - Optimierte Funktionalisierung von Nanosensoren zur Gasdetektion durch Screening von Hybrid-Nanopartikeln
Ziel des Projektes ist die systematische Optimierung von CMOS-integrierten chemischen Sensoren zur Detektion von umweltrelevanten Gasen mittels funktioneller Nanomaterialien. Damit wird ein weltweit einzigartiger Multi-Gassensor-Chip entwickelt, der in Smart Phones eingesetzt werden kann.
FiTNeS - Fassadenintegrierte modulare Split-Wärmepumpe für Neubau und Sanierung
Das Ziel von FitNeS war die Entwicklung von modularen Split-Wärmepumpen mit sehr kompakten fassadenintegrierten Außeneinheiten für die Verwendung zur wohnungsweisen Heizung und Trinkwarmwasserversorgung. Einerseits soll eine modulare Bauweise mit einem hohen Grad an Vorfertigung ermöglicht werden und andererseits soll die architektonische Gestaltung und ein ansprechendes Design besondere Berücksichtigung finden. Eines der wesentlichen Entwicklungsziele ist die Minimierung der Schallemissionen durch eine optimierte Strömungsführung.
LignoWert - Produktion von biobasierten Resolen aus strukturdefinierten Lignin-Oligomeren
Im Projekt LignoWert wird an der Entwicklung von biobasierten Phenol-Bausteinen aus den Bioraffinerieprodukten Lignin und Lignosufonaten geforscht.
Reallabor Murau: Reallabor der Energiewende für inneralpine Regionen
Das # Reallbor Murau treibt mit einem kooperativen Ansatz die Region Murau als 100% erneuerbares regionales Systemkraftwerk voran. Ziel ist es, einen möglichst hohen Nutzungsgrad an erneuerbarer Energie in der Region selbst zu schaffen und gleichzeitig Überschuss-Energie bedarfsgerecht zu exportieren.
POLLID
Pollen is a valuable natural resource for active agents, which is collected by bees in a natural way. To use the pollen a processing (sorting) is necessary. The project deals with the basics of the identification and separation of bee-collected pollen.
THECLA
ValorPlast – Valorisierung von Restströmen der Zuckerindustrie zur Biokunststoffproduktion
Im Rahmen des Projekts wird die biotechnologische Umsetzung von Nebenprodukten der Zuckerindustrie zu Biopolymeren (PHA) untersucht. Die hergestellten Polymere und der Produktionsprozess vom Rohstoff bis zu potentiellen Anwendungen werden gesamtheitlich evaluiert, um die Basis für eine weiterführende Produktentwicklung zu bilden.
Heat Harvest - Ernte von urbaner solarer Abwärme von Gebäuden und Oberflächen zur Vermeidung der sommerlichen Überhitzung in Städten
"Ernte" solarer urbaner Überschusswärme von Gebäudeoberflächen, Gehwegen, Straßen und Plätzen zur Vermeidung urbaner Hitzeinseln durch flach verlegte Absorberleitungen, welche danach in Erdsondenspeicher zur späteren Verwendung als Quelle zur Gebäudeheizung eingebracht wird.
Heat Harvest - Harvest of urban solar excess heat from buildings and surfaces to avoid summer overheating in cities
"Harvest" of solar urban excess heat from building surfaces, sidewalks, streets and squares to avoid urban heat islands by lying flat absorber pipes, which are then fed into geothermal probe storage tanks for later use as a source for heating buildings.
Plan4.Energy - Methodenset für die Planungsbegleitung der Plusenergiequartiere
Plan4.Energy entwickelt ein Methodenset zur Planungsbegleitung von Plusenergiequartieren. Dieses soll mittels datenbasierter Systemintegration eine nutzerfreundliche, quantitative Bewertung der Möglichkeiten zum Aufbau eines Plusenergiequartiers ermöglichen. In weiterer Folge sollen Stakeholder ohne facheinschlägigen Hintergrund damit unterschiedliche Projektvarianten realistisch einschätzen können.
Plan4.Energy – methodological set for the planning support of positive energy districts
Plan4.Energy develops a set of methods to support the planning of positive energy districts. The data-based system integration will enable a user-friendly quantitative assessment of the possibilities for building a positive energy district. This will allow stakeholders without the relevant background knowledge to realistically assess different project variants.
MEIDLINGER „L“-Partizipative und skalierbare Klimawandelanpassungen im Bestand an der Schnittstelle von öffentlichem und privatem Raum
Das Projekt verfolgte einen integralen und interdisziplinären Ansatz zur Klimawandelanpassung im baulichen Bestand an der Schnittstelle von öffentlichem und privatem Raum. Es wurde ein skalier- und multiplizierbares Modell für Wien und andere Städte entwickelt.
MEIDLINGER "L"-Participatory and scalable climate change adaptations in existing buildings at the intersection of public and private space
The project pursued an integral and interdisciplinary approach to climate change adaptation in existing buildings at the interface between public and private space. A scalable and multipliable model for Vienna and other cities had been developed.
MISSION KS 30 - Mission Klagenfurt klimaneutral und smart bis 2030
Aktualisierung der Smart City Strategie (SCS) Klagenfurt zur Erreichung der Klimaneutralität bis 2030 und die Anpassung der Indikatoren an die Sustainable Developement Goals (SDGs) der UN. Erfüllung der Teilnahmebedingungen zur urbanen Mission von Horizont Europe „100 Climate-neutral Cities by 2030“.
MISSION KS 30 - Mission Klagenfurt climate-neutral and smart until 2030
Updating the Smart City Strategy (SCS) of Klagenfurt to achieve climate neutrality by 2030 and adapting the indicators to the Sustainable Development Goals (SDGs) of the UN. Fulfilling the participation requirements for the urban mission of Horizon Europe "100 Climate-neutral Cities by 2030".