Suchergebnisse

Energiesysteme der Zukunft

Direct feeding system for biogas plants

The aim of this project is to develop an energy- and cost-saving direct feeding system for biogas plants, which deals with differing types of substrates and sizes of plants. Furthermore it solves previous logistical problems.

Fabrik der Zukunft

Das nachhaltige Krankenhaus. Transferphase

Die Ergebnisse aus Machbarkeitsstudie und Pilotprojekt zum "nachaltigen Krankenhaus" wurden in einer breit gefächerten Transferstrategie durch zielgruppenspezifische Impulse verbreitet. Der Transfer nutzte eine langjährige, intensive, von der Fabrik der Zukunft geförderte Kooperation zwischen Pilotkrankenhaus, Wiener Krankenanstaltenverbund, einem Berliner Krankenhausträger sowie einem interdisziplinären Wissenschaftsteam.

Fabrik der Zukunft

Risikofrei zur Produktdienstleistung (RISP)

In RISP wird ein Prozessmodell für den Entwicklungsprozess von Produktdienstleistungen entwickelt. Dieses besteht aus sieben Stufen und so genannten "Toren" zwischen den Stufen. Die Fragen, die an den Toren vor dem Eintritt in die nächste Stufe beantwortet werden müssen, werden aus einer Failure Mode and Effect Analyse der einzelnen Stufen abgeleitet.

Haus der Zukunft

BIGMODERN Subproject 7: Monitoring concept

Development of a pattern for comprehensive documentation of the project results. The concepts contain amongst others monitoring of energy consumption, resources, costs, functionality and comfort, etc.

Internationale Energieagentur (IEA)

IEA IETS Annex 15: Industrielle Abwärmenutzung (Phase 3)

Im Rahmen des IEA IETS Annex 15 (Phase 3) wurden Potentiale für die Nutzung von Abwärme sowie Technologien zu deren Integration durch Beiträge aus nationalen Forschungstätigkeiten gesammelt, gebündelt und aufgearbeitet. Die Beiträge des österreichischen Konsortiums umfassten Technologieentwicklung und Integrationskonzepte von Wärmepumpen- und Energiespeichern, Risikoanalysen bei der Umsetzung von Abwärmeprojekten und Arbeiten zur Betriebsoptimierung und Auslegung von hybriden Energiesystemen.

Internationale Energieagentur (IEA)

IEA IETS Annex 15: Industrial Excess Heat Recover (Phase 3)

Within the framework of the IEA IETS Annex 15 (Phase 3), potentials for the use of waste heat as well as technologies for its integration are collected, bundled and processed through contributions from national research activities. The contributions of the Austrian consortium included technology development and integration concepts of heat pump and energy storage systems, risk analysis in the implementation of waste heat projects, and work on operation optimization and design of hybrid energy systems.

Internationale Energieagentur (IEA)

IEA 4E: Annex Elektrische Motorsysteme. Arbeitsperiode 2021 - 2024

Im Rahmen des Annex Electric Motor Systems soll Bewusstseinsbildung über das große Energieeinsparpotenzial von Motorsystemen und das Aufzeigen von Wegen zur Realisierung dieser Potenziale erfolgen. Nach der Erarbeitung der Politik- und Energieauditleitfäden für Motorsysteme leitet Österreich den Task „Neue industrielle Entwicklungen und Digitalisierung in Motorsystemen“.

Internationale Energieagentur (IEA)

IEA 4E: Annex Electric Motor Systems. Working period 2021 - 2024

The goal of the Annex Electric Motor Systems is to raise awareness on the large savings potential in motor systems, while showing the realization method of such a path. After publishing the policy and audit guidelines for motor systems Austria leads the task „New Industrial Developments and Digitalization in Motor Systems“.

Internationale Energieagentur (IEA)

IEA 4E: Annex Elektrische Motorsysteme. Arbeitsperiode 2019 - 2021

Im Rahmen des Annex Electric Motor Systems soll Bewusstseinsbildung über das große Energieeinsparpotenzial von Motorsystemen und das Aufzeigen von Wegen zur Realisierung dieser Potenziale erfolgen. Nach der Erarbeitung der Politik- und Energieauditleitfäden für Motorsysteme leitet Österreich den Task „Neue industrielle Entwicklungen und Digitalisierung in Motorsystemen“.

Internationale Energieagentur (IEA)

IEA 4E: Annex Electric Motor Systems. Working period 2019 - 2021

The goal of the Annex Electric Motor Systems is to raise awareness on the large savings potential in motor systems, while showing the realization method of such a path. After publishing the policy and audit guidelines for motor systems Austria leads the task „New Industrial Developments and Digitalization in Motor Systems“.

Internationale Energieagentur (IEA)

IEA-4E Annex Electric Motor Systems (EMSA). (Working period 2014-2017)

The goal of the Annex Electric Motor Systems is to raise awareness on the large savings potential in motor systems, while showing the realization method of such a path. Currently, Austria leads the task Energy Audits for Motor Systems to develop recommendations for carrying out energy audits for motor systems based on international standards.

Nachhaltig Wirtschaften

Additive Fertigung (3D-Druck) von komplexen Metall- und Keramikteilen (FlexiFactory3Dp)

Das Ziel dieses Projektes ist die Entwicklung eines nachhaltigen, robusten und flexiblen Produktionsprozesses für komplexe metallische und keramische Bauteile. Zwei Fallbeispiele werden untersucht: ein Bauteil aus dem Automobilbereich und ein monolithischer Katalysator für die Luftreinigung.

Internationale Energieagentur (IEA)

IEA 4E: Annex Elektrische Motorsysteme. Arbeitsperiode 2017 - 2019

Im Rahmen des Annex Electric Motor Systems soll Bewusstseinsbildung über das große Energieeinsparpotenzial von Motorsystemen und das Aufzeigen von Wegen zur Realisierung dieser Potenziale erfolgen. Nach der Erarbeitung der „Policy Guidelines for Electric Motor Systems“ und von Empfehlungen zu normkonformen Energieaudits in Motorsystemen analysierte Österreich die Auswirkung von Industrieautomatisierung auf den Stromverbrauch und den Motorenmarkt.

Internationale Energieagentur (IEA)

IEA 4E: Annex Electric Motor Systems. Working period 2017 - 2019

The goal of the Annex Electric Motor Systems is to raise awareness on the large savings potential in motor systems, while showing the realization method of such a path. After publishing the „Policy Guidelines for Electric Motor Systems“ and recommendations for carrying out energy audits for motor systems based on international standards Austria analysed the impact of industrial automation on electricity consumption and the motor market.

Internationale Energieagentur (IEA)

IEA DHC Annex XIII Project 07: CASCADE - A comprehensive toolbox for integrating low-temperature sub-networks in existing district heating networks

The majority of urban district heating networks operate at high temperatures, which are a barrier to the efficient integration of heat sources such as solar, geothermal, ambient or low temperature waste heat. CASCADE is investigating the integration of low-temperature networks into the return pipe of existing district heating networks, which will reduce return temperatures and thus improve efficiency and increase its capacity to connect new customers.

Internationale Energieagentur (IEA)

IEA DHC Annex XIII Projekt 02: MEMPHIS 2.0 - Fortschrittliche Algorithmen zur räumlichen Identifizierung, Beurteilung der zeitlichen Verfügbarkeit und wirtschaftlichen Bewertung von Abwärmequellen und ihrer lokalen Darstellung

Die Identifizierung und Integration von Abwärmequellen ist eine Schlüsselmaßnahme zur Dekarbonisierung von Fernwärmenetzen (DHN). Ziel von MEMPHIS 2 ist die Entwicklung eines verbesserten Algorithmus zur Identifizierung verschiedener aktueller und zukünftiger Abwärmequellen, einschließlich zeitlicher Abhängigkeiten der emittierten Wärme und technisch-ökonomischer Details sowie die Weiterentwicklung des Online-Abwärme-Explorers.

Internationale Energieagentur (IEA)

IEA DHC Annex XIII Project 02: MEMPHIS 2.0 - Advanced algorithm for spatial identification, evaluation of temporal availability and economic assessment of waste heat sources and their local representation

The identification and integration of waste heat sources is a key measure towards the decarbonisation district heating networks (DHN). Aim of MEMPHIS 2 is to develop an improved algorithm for identification of different current and future waste heat sources; including time relations of the heat emitted and techno-economic details as well as the further development of the online waste heat explorer.

Haus der Zukunft

Timber Passive House at Mühlweg, 1210 Vienna

Low-rise housing with 70 units (200 residents) in solid wood plate construction designed to meet European passive building standards. Strategies for highly ecological and sustainable building within the economic constraints of social housing, Mühlweg, 1210 Vienna. Industrial pre-fabrication, ...

Haus der Zukunft

Neubau Ökologisches Gemeindezentrum Ludesch

Das Gemeindezentrum Ludesch ist beispielgebendes Modell für die konsequente Ökologisierung von öffentlichen Ausschreibungen mit dem Ergebnis eines nachhaltigen Bauprojektes, das ohne wesentliche Mehrkosten realisiert werden konnte.

Energiesysteme der Zukunft

Erste Mikrogasturbine Österreichs in Voitsberg im Einsatz

Die steirische Gas-Wärme-GmbH betreibt in Voitsberg eine Mikrogasturbine, um die Eignung für einen verbreiteten Einsatz zu prüfen