Suchergebnisse
IEA HPT Annex 51: Akustische Emissionen von Wärmepumpen
Ziel des Annexes war es, durch eine Reduktion von Schallemissionen und Vibrationen von Wärmepumpen deren Akzeptanz zu erhöhen und Markbarrieren abzubauen. Mittels innovativer Mess- und Datenanalyseverfahren wurden Einflussfaktoren auf die Schallemissionen von Wärmepumpensystemen und der Einfluss von Schallschutzmaßnahmen untersucht. Die Ergebnisse wurden in Form von Leitfäden und Handlungsempfehlungen aufgearbeitet.
IEA EBC Annex 72: Assessing life cycle related environmental impacts caused by buildings
The construction sector has great potential to reduce its energy consumption and the associated environmental impacts. The IEA EBC Annex 72 therefore focuses on the harmonization of methods for the assessment of construction-specific and operational environmental impacts (primary energy requirements, greenhouse gas emissions and other indicators) throughout the life cycle of buildings.
IEA EBC Annex 72: Bewertung von Umweltwirkungen während des gesamten Lebenszyklus von Gebäuden
Der Bausektor besitzt großes Potential zur Reduzierung seines Energieverbrauchs sowie der damit verbundenen Umweltwirkungen. Der IEA EBC Annex 72 konzentriert sich deshalb auf die Harmonisierung der Methoden zur Bewertung von bauproduktspezifischen und betriebsbedingten Umweltwirkungen (Primärenergiebedarf, Treibhausgasemissionen und anderen Indikatoren) während des gesamten Lebenszyklus von Gebäuden.
IEA EBC Annex 71: Bewertung der Gebäudeenergieeffizienz mit Hilfe optimierter in situ Messverfahren
Die Anforderungen an die Gebäudehülle und an die Gebäudetechnik werden stetig angehoben. Es mangelt an Mess- und Analysemethoden, um die Qualität der Umsetzung kontrollieren und den Gebäudebetrieb optimieren zu können. Dieses Projekt erarbeitete methodische Grundlagen um eine vor-Ort (in situ) Bewertung der tatsächlichen Energieeffizienz und des Gebäudebetriebs zu ermöglichen. Dazu untersuchte es Methoden um datengetriebene Gebäudemodelle mit Hilfe möglichst „ohnehin“ verfügbarer Daten zu generieren.
IEA EBC Annex 71: Building Energy Performance Assessment Based on In-situ Measurements
The requirements on building envelope and on building technology are steadily increasing. There is a lack of measurement and analysis methods to control the quality of the built implementation and to optimize the building operation. This project developed a methodological basis to enable an in-situ evaluation of the actual energy performance and building operation. For this purpose, it investigated methods to generate data-driven building models favouring the use of already available on-board data.
IEA HPT Annex 48: Industrielle Wärmepumpen Phase 2
Industriewärmepumpen ermöglichen die Nutzung von Abwärme und erhöhen die Energieeffizienz industrieller Prozesse. Ziel dieses Projektes war es, umfassende Informationen zur erfolgreichen Anwendung von Industriewärmepumpen zur Verfügung zu stellen und so zur weiteren Verbreitung dieser Technologie beizutragen.
IEA EBC Annex 67: Energy Flexible Buildings (working period 2015 - 2019)
The project increased the knowledge on building Energy Flexibility and the regarding potential buildings can provide to energy grids. The critical aspects and possible solutions to utilize the Energy Flexibility that buildings can provide were identified and a report of the “Principles of Energy Flexible Buildings” will be published in 2019.
IEA HPP Annex 47: Heat Pumps in District Heating and Cooling Systems
A significant use of alternative heat sources with the help of district heating and cooling networks is a major challenge for a sustainable energy supply. In times of increasing shares of fluctuating producers such as PV and wind energy, the relevance of heat pumps increases. Within the framework of the IEA HPT Annex 47, potentials and barriers for the integration of heat pumps in DHC networks were analyzed.
IEA EBC Annex 57: Evaluation of the design-specific CO2 emissions and the gray energy
The IEA-EBC Annex 57 evaluated methods of construction-related embodied environmental impacts and embodied energy and related international best practice projects and their approaches. Based on these findings, methodological guidelines as well as measures for their application at the international level and for the planning of buildings - with lower embodied energy and embodied greenhouse gas emissions - were derived.
IEA EBC Annex 66: Definition and Simulation of Occupant Behavior in Buildings
Given the considerable implications of occupants' presence and behavior for buildings’ performance, IEA EBC Annex 66 aims to set up a standard occupant behavior definition platform, establish a quantitative simulation methodology to model occupant behavior in buildings, and understand the influence of occupant behavior on building energy use and the indoor environment.
IEA EBC Annex 56 – Cost Effective Energy and Carbon Emission Optimization in Building Renovation
The objective of the IEA EBC Annex 56 project was to develop a methodology for cost effective energy and carbon emissions optimization in building renovation. Within the frame of the project this methodology was developed and furthermore also innovative renovation projects were collected and analyzed, which should perform as best practice examples.
IEA HPT Annex 51: Acoustic Signatures of Heat Pumps
The aim of the project was to increase the acceptance of heat pumps by reducing their noise emissions and vibrations and to reduce market barriers. Using innovative measurement and data analysis methods, influencing factors on the acoustic emissions of heat pump systems and the impact of acoustic protection measures were investigated. The results were prepared in the form of guidelines and recommendations for action.
Empfehlungen für Förderkriterien zur Forcierung von Systemnutzen für mittlere- und große Batteriestromspeicher
Marktanalyse und Stakeholder Prozess
Architectural Concept for Musicians
Starting from the special needs of a specific user group, an Architectural Concept for Musicians will be proposed and realized, with Housing as principal functional usage.
IEA ENARD Annex II: DG System Integration in Distribution Networks
Aufgrund der derzeitigen energiepolitischen Rahmenbedingungen und technischen Entwicklungen erhöht sich der Anteil an verteilten dezentralen Energieressourcen (Distributed Energy Resources - DER) und insbesondere Dezentraler Stromerzeuger (Distributed Generation - DG) in den elektrischen Verteilnetzen stetig. Der Anteil an dezentralen Erzeugern wird in Zukunft noch mehr steigen.
Passivhaus-Sanierungsbauteilkatalog
"Haus der Zukunft"-Forschungsberichte werden bezüglich konstruktiver Lösungen für die Gebäudesanierung ausgewertet. Die Details werden mit konstruktiven, bauphysikalischen und bauökologischen Ergänzungen nach einer bewährten Darstellungsmethodik zu einem PH-Sanierungsbauteilkatalog zusammengefügt und präsentiert.
Biomassevergasung im Kraftwerk Zeltweg
Im kalorischen Kraftwerk Zeltweg, wurde Biomasse als Zusatzbrennstoff untersucht. Dabeiwird Holz in einer Wirbelschichtanlage vergast und dem Standardkessel alsZusatzbrennstoffzugeführt.
IEA IETS Annex 18: Digitalisierung, KI und verwandte Technologien für industrielle Energieeffizienz THG-Emissionsreduktion (Arbeitsperiode 2020 - 2023)
Die Arbeit im Task 18 ermöglicht den Austausch von Erfahrungen und Wissen zwischen Industrie und Forschungseinrichtungen aus verschiedenen Ländern. Durch die Zusammenarbeit werden Best Practices identifiziert und verbreitet, um die Umsetzung von energieeffizienten Technologien in der Industrie zu fördern. Dies trägt mittel- und langfristig dazu bei, den Energieverbrauch und die Treibhausgasemissionen zu reduzieren.
IEA IETS Annex 18: Digitalization, artificial intelligence and related technologies for energy efficiency and reduction of GHG emissions in industry (Working period 2020 - 2023)
The work in Task 18 enables the exchange of experience and knowledge between industry and research institutions from different countries. Through this cooperation best practices are identified and disseminated to promote the implementation of energy-efficient technologies in industry. In the medium and long-term, this contributes to reduce energy consumption and greenhouse gas emissions of industry.
Kapazitätsanpassung der Bauwirtschaft für eine erhöhte Sanierungsrate
Die notwendige Erhöhung der Sanierungsleistung wird angesichts der weiterhin guten Auftragslage im Neubau nur mit einer Ausweitung der Kapazitäten der Bau- und Bauproduktewirtschaft zu erreichen sein. Dies hat große Auswirkungen auf den Arbeitsmarkt und bietet die Chance für strategische Weichenstellungen, stößt allerdings auch auf Barrieren.