There are 1085 results.
A Catalogue of Passivhouse Details for Refurbishments for buildings of all building periods from the 1870 to the 1980s. Special consideration to the refurbishment of building parts in contact with the earth. Integration of controlled ventilation services. Construction elements description with drawings, building physical data and ecological life cycle assessment. This project aimed at contributing to "Replicable refurbishment concepts for meeting passive house (or comparable) standard in buildings of all building periods".
Based on an analysis of current milieu-specific consumption behavior, the CE4ALL project aims to identify sector-specific incentives and enablers for strengthening the circular economy and to uncover inhibitors. Another focus of this work is the consideration of inclusion aspects. For this purpose, the "R"-strategies of the circular economy (refuse, reduce, rethink, etc.; altogether 9 circular economy strategies), circular economy relevant industries as well as the milieus are made combined tangible by means of a multidimensional mapping in the three-dimensional Circular Economy Cube framework. CE4ALL is therefore working on a consumption-centered investigation beyond the previously production-oriented considerations of the circular economy.
CELL4LIFE - Reversible SOCs as a link between electricity, heat and gas networks to increase the self-sufficiency and resilience of neighbourhoods
A system consisting of a solid oxide fuel cell and a Machine Learning-based control system for increasing efficiency and minimizing degradation is being developed. As a link between all energy supply networks, the system is intended to increase the self-sufficiency and resilience of plus-energy districts.
CellPor - cellulose polymerized - new methods for the processing of a polymer-cellulose-foam according to ecological criteria in construction
The development of a spray applicable cellulose composite as insulating material on the basis of renewable resources, combined by the development of a prototype for the spray-on technology for processing the new, water free cellulose composite are the demanding challenges of this project.
Conversion of an attic of a typical building from the period about 1900 to a passive attic with photovoltaic system and renovation of the existing building equipment. The aim is to keep the additional construction costs under 10 %, to avoid overheating in summer and to make possible a reproduction for the large amount of buildings from the same period.
CHALLENGE - Highly efficient use of hot gas and waste heat in air/water heat pumps for plus-energy buildings and quarters
CHALLENGE aims to further develop the system concept for air-to-water heat pumps in such a way that they can be used efficiently and without the above mentioned negative effects in densely built-up urban areas. In concrete terms, validated simulations and a functional model of the overall system on a laboratory scale are to be used to demonstrate that the concept can save 10% of electrical energy, reduce the noise of outdoor units in summer to a minimum and prevent the formation of local heat islands.
Characterisation of material parameters as basis for innovative processing methods and products made of large dimensioned wood aiming at economically sustainable use of Austrian timber resources "XXL-Wood"
Facing the problem of decreasing demand for large dimensioned timber, investigations are carried out concerning certain properties like strength and fibre characteristics. Due to the data it is possible to create a model about the variability of special properties of a stem. Based on the model new concepts for optimised processing and products will be developed.
Based on promising preliminary work feasibility and recycling strategy of the modifying process shall be evaluated economically and ecologically.
The results of this project were to deliver the basics for chemical process engineering taking into account the requirements of sustainable development. The proposed results will have to be in conformity with ecological, economic and social requirements for sustainability. Hence the processes will mostly be based on renewable resources.
Analyses of biochemical reactions causing colour changes during the hygrothermal treatment of selected hardwoods will lead to a model for defined and process-based colouration or maintenance of colour in drying and steaming processes. Based on this development the new drying and steaming schedules will be implemented in the industry.
The project CiQuSo aimed to develop, evaluate and optimize concepts for solar energy systems to provide energy for buildings and cities. The applicability of the developed methods and concepts were shown as an example at Itzling, a part of Salzburg city.
circPLAST‐mr Mechanical Recycling of Plastics: Mechanisches Recycling von Kunststoffen: From waste plastics to high‐quality and specification‐compliant recyclates
The flagship project circPLAST‐mr pursues the following 4 main objectives: (1) to identify and explore previously unused potential for mechanical plastics recycling, (2) to define and test key process steps for this on a laboratory/pilot scale, (3) to demonstrate the eco‐efficient marketability of increased recycled plastic volumes, and (4) to demonstrate the scalability of the laboratory/pilot process steps to industrial scale.
Development of an intelligent district cooling concept and alternative solutions for heat rejection from central absorption chillers at the example of the neighbourhood TownTown in Vienna.
City Dialog - Evaluation of future research topics for the "city of the future" through stakeholder dialog.
The integration of key stakeholder views allowed an extensive evaluation and prioritisation of research topics for the "city of the future". The discussion had been organised in workshops with stakeholder groups (public administration, science & research, residents).
To assess the energy performance of urban planning projects in early design stages with low input and evaluation effort within the project CityCalc, an easily applicable planning and evaluation tool has been developed.
CityStore - Sondierung des wesentlichen F&E-Bedarfs zur Optimierung von städtischen Energiespeichern in integrierten Energiesystemen
CityStore pursues a first-of-its-kind, innovative approach on spatial location of storage needs and potentials. This includes the evaluation of concrete challenges and prerequisites as well as the identification of useful storage technologies and capacities. Model calculations for the model cities Graz and Weiz will be carried out. If, and to which extent, the results can be generalized will be investigated in the Follower Region South Burgenland. The results should enable optimized planning and realization of urban energy storage facilities – thereby enabling targeted investments in energy infrastructure to achieve (local) climate and energy targets.
The motivation for developing the project "Clay Passiv Office-Building Tattendorf" was the dissatisfaction with the situation of a great difference in the state of technology in three fields relevant to the research project: 1) sustainable production of energy , 2) sustainable energy conservation technologies and 3) use of sustainable building materials.
The C3E International Initiative deals with strategies, policies and measures to increase the promotion of women in the field of clean energy and energy research in particular.
Climate Hub Vienna - Concept development and preparation of an innovation laboratory to accelerate Vienna’s path to climate neutrality
Preparation of an urban innovation laboratory to support decarbonisation in Vienna by 2040. The focus is on systemic innovation and accelerated roll-out of RTI projects through infrastructure, services, networking and the systematic involvement of city administration and users. The innovation lab is intended to strengthen the effectiveness of innovations and the participation of the Viennese in the transformation.
Climate neutral buildings from the period of promoterism - ways, potentials and possibilities of implementation
The focus was on the goal-oriented and economic options, in order to achieve a CO2-neutral energy supply and hermetically sealed building envelope as well as to show high energy efficiency when using. On the other hand building protection regulations and the quality in use are to be considered.