Suchergebnisse
CircularBioMat – Recyclable biogenic materials for building installations and supply equipment
As part of CircularBioMat, numerous bio‐based materials – including bio‐polymers reinforced with natural fibers as well as recycled materials – are being tested for their suitability as a replacement for the petroleum‐based polymers that dominate technical building installations (TGA) and supply equipment.
PolyBacTex - Converting mixed textile waste into recycled fibres and cellulose for sustainable production
The project PolyBacTex is developing a solution for recycling of used mixed textiles by chemically separating and biotechnologically upgrading the individual fibre types (cellulose and polyester). This allows cellulose fibres to be recovered and returned to the fibre production process.
circPLAST‐mr Mechanical Recycling of Plastics: Mechanisches Recycling von Kunststoffen: From waste plastics to high‐quality and specification‐compliant recyclates
The flagship project circPLAST‐mr pursues the following 4 main objectives: (1) to identify and explore previously unused potential for mechanical plastics recycling, (2) to define and test key process steps for this on a laboratory/pilot scale, (3) to demonstrate the eco‐efficient marketability of increased recycled plastic volumes, and (4) to demonstrate the scalability of the laboratory/pilot process steps to industrial scale.
ReKEP
ReKEP relies on reusable transport containers instead of (disposable) cardboard packaging. These should be affordable, effective and flexible to use in the CEP sector (courier, express, parcel). The logistics processes involved are examined and adjustments are proposed to achieve economic, ecological and social sustainability.
Business model innovations for rental and service models in the manufacturing sector
The project aims to contribute to a better understanding of the economic and ecological potentials of an implementation of lending and service models in the manufacturing sector in Austria and to show which changes and R&D efforts are necessary so that these can be realized by suitable business models.
CircuPack - Recyclable materials for food packaging with a low ecological footprint
The goal of the project is to develop sustainable and environmentally friendly food packaging with an improved ecological footprint. It is important to develop a new process control that ensures both food compatibility and the sustainability of the resulting product.
DigiTech4CE - Digital key technologies for circular production
DigitTech4CE analysed industrial cycles in discrete, digitalised production; their participants, advantages/disadvantages and framework conditions, as well as the key digital technologies required. Fields of action were developed, according to the needs of Austrian industry. Recommendations for action serve the development of sustainable, Austrian production that builds and expands competitiveness through circular innovations.
BitKOIN - CO2-reduced binding agent through thermochemical conversion of mineral wool waste combinations
In the BitKOIN project, conceptual, experimental and model research activities are conducted in order to develop a substitute material for ground-granulated blast furnace slag (GGBS). First, mineral wool waste and other mineral residues, which are required as additives to achieve the desired chemistry, are sampled representatively. The materials are then characterized chemically, mineralogically and physically and are additionally classified according to waste regulations. By thermochemical conditioning of the mineral wool waste, combined with the other waste materials, the "Huettensand 2.0" (GGBS 2.0) is developed. The project aims to develop the "Huettensand 2.0" , a durable GGBS substitute.
Circular Economy Compass (KLW-Komp)
The Circular Economy Compass project has developed a responsive online self-assessment tool for the circular economy in SMEs. Based on a theory-based evaluation scheme, it is be possible to determine a company's degree of preparedness for a circular economy at a reasonable cost. To this end, the tool has a computational logic that automatically generates a circularity score (KPI, Key Performance Indicator) based on the answers.
BATTBOX - BATTeryrecycling Best Operations by X-processes for circular battery ecosystem
In the BATTBOX project, e-mobility traction batteries are analysed for their cycle capability. The design and structure of battery systems are examined and evaluated regarding potential hazards. Based on this, the best possible handling and processing procedures are developed to improve and optimize the product life cycle regarding safety and recyclability.
RE:STOCK INDUSTRY - Digital framework for the circular reuse of existing structures for vertical production
RE:STOCK INDUSTRY is developing AI-based Scan-to-FEM methods, vertical 3D production concepts, and an interactive AR application for precise capturing, modelling, and analysis of industrial buildings' load-bearing structures. The aim is to determine the potential of the structure for reuse, modernization, and vertical expansion, considering aspects of circular economy.
ReTarget - Re-manufacturing and re-purposing of high-quality sputter materials
The project objective is to reduce the energy input in the production of sputtering targets by at least 20 % by direct re-manufacturing of used, precious metal targets. In addition, the utilization rate will be increased from an average of 20-30 % to 70-80 % through a direct re-purpose approach, as well as by optimizing the sputtering process. This will allow a significant reduction of the footprint of the sputtering process.
LightCycle
Fiber-reinforced thermoplastic composite components with low weight, so-called lightweight components for transport and mobility, lead to significant CO2 savings. Despite established production technologies and weight savings, further progress in lightweight construction is increasingly difficult because the sustainability of these products is currently not given due to the unresolved recycling problem, although the regulations require, among other things, 85 % recycling of an end-of-life vehicle.
CycLR - Paint recycling and utilization of components
The CycLR project aims to implement a circular economy for water-based paints. A recycling process that enables the valorisation of recyclates is being developed, taking into account all parties involved in the value chain.
Hemp Ski, Recyclable ski manufacturing from hemp, bio-resin and waste streams
In industrial production for alpine skis, epoxy resins of fossil origin and pre-impregnated glass fiber reinforcements are processed today. Innovations that replace environmentally critical materials in skis with biogenic substitute materials with an improved environmental balance have so far been limited to the production of small series. This circumstance motivated the consortium to develop a solution for a circular bioeconomy with the HempSki project, which will also make industrial ski production from renewable raw materials and waste streams possible in the future.
BuildReUse ‐ 100 percent re‐use and recycling in buildings with short usage cycles
Some buildings, such as supermarkets or office buildings, are often demolished and rebuilt after a few years or at least have their interiors changed, turning large quantities of building components into waste. The BuildReUse project aims to develop circular economy concepts for these buildings and to promote the necessary change in the construction industry.
SHyRE - Sulfuric acid and hydrogen production for the electronics industry through innovative recycling
In SHyRE, an innovative process for sulfuric acid recycling is being developed. The aim is to efficiently produce high-purity sulfuric acid and hydrogen by combining novel decomposition processes with electrochemical methods.
RE-FORM earth - Earth Building for Building Sector Transformation
In order to promote the use of earth, the RE-FORM earth project is creating a planning basis for the construction of structures and buildings containing earth. In order to counter uncertainties regarding the health effects of earth building materials, a comprehensive program is being carried out to investigate radiation exposure and potential pollutants in earth. By erecting a temperature-controlled rammed earth wall in a test room with subsequent measurements, the aim is to determine the extent to which the material can contribute to healthy indoor air due to its moisture-regulating properties and help to balance out energy peaks.
StraTex ‐ Sorting and processing strategies for used textiles to produce recyclable fractions
In StraTex, suitable, economically viable and holistic strategies for the collection, processing and automated sorting of mixed non‐reusable textiles are being developed and experimentally implemented in order to increase the proportion of marketable fractions for high‐quality material recycling (preferably fibre2fibre).
MeteoR – mechanical-thermochemical process combinations for the recycling of fine fractions from waste treatment facilities
In waste treatment plants large quantities of fine fractions are generated. Due to their heterogeneity and properties, these fractions are currently not used although they contain a whole range of materials that represent valuable resources. The aim of the project MeteoR is to enable the utilization of all components (mineral, metallic, and combustible) of fine fractions by combining mechanical and thermochemical processes, to close material cycles and to significantly contribute to the further development of the Austrian circular economy and the reduction of CO2 emissions.