Suchergebnisse für "Factsheet: Energietechnologien gestalten, die für alle sinnvoll und nutzbar sind"

FFF-TaliSys - Freeform Systems for Daylighting to be Integrated in a Façade and in a Skylight

In the course of the project FFF-TaliSys novel daylighting systems based on freeform surface technology were developed and implemented into functional models, thus, innovative systems that solve the contradictory requirements of daylighting systems.

Materials Roadmap Austria

Elements for the discussion for Technology Platforms, R&D Programs and decision makers in R&D Policy

Workshop: The Role of Storage in Energy System Flexibility

22. - 23. Oktober 2014
German Federal Ministry of Economic AffairsScharnhorststraße 34-37, 10115 Berlin, DE

This workshop will focus on the evolving nature of the grid, with the goal of identifying novel approaches, RD&D needs, other areas not well covered but needing attention, and innovative case studies related to electricity storage in a flexible electricity grid of the future.

Optimization of energy supply

The purpose of the work is to analyze the possibilities of the reduction of the energy demand of residential buildings by using telecommunication technologies such as mobile phones or Internet. Lowering room and water temperature during the absence of the inhabitants are of particular relevance.

Quantitative and qualitative identification of relevant secondary raw material flows in Austria

In the course of the raw material initiative, the European Commission classified a number of elements and basic materials (including rare earth elements, gallium, germanium, platinum group metals and tantalum) as critical raw materials because of their doubtful future access. In order to operate appropriate recycling of these particular critical raw materials, the primary aim of the present project is to identify the waste streams and to investigate their quality and the quantity of critical raw materials. As a basis for presented aim a "Secondary Raw Material Map Austria 2030", which represents the theoretical, the real and in the future reachable potential of this critical secondary raw materials, is developed.

Sol2Pump - High efficient combination of solar thermal plants, photovoltaic and heat pumps

Targeting a high level of decentralised energy supply on basis of renewable energy, the project analysed the possible combinations of solar thermal energy, photovoltaic and heat pumps. The project aimed to maximise the domestic energy supply due to utilisation of the building as short term energy storage. In addition to that, several optimisation measures had been developed. The impact on the energy supply and demand will be economically assessed through life cycle costing. On this basis, the potential load transfer and the use of this kind of systems had been evaluated in combination with smart grids.

Passivhauswohnen³: Facility Management for Residential Property Developers: A Key to Optimizing the Reduction of Energy and Operation Costs

What soon will be considered "standard" in ecological building must be carried out by the property developer and accepted by the future user. Therefore, in order to assist a smooth implementation of the new passive housing technique and begin the corresponding feedback mechanisms, a specific KMU "quality and incentive model" should be launched. The interrelationship of this model is designed with the property developer as well as the user in mind and aims for lasting "behavior modification" in energy and operational expense consumption.

Ways and means to increase the construction-volume by 500%, by means of standardised thermal restoration of old houses.

Development of practise-fit methods for intensification and rationalisation of processes in the field of restoration of one-and two-family houses built between 1945 and 1982 in Austria.

Test stand method for the determination of system efficiency and emission factors of small-scale biomass combustion systems

Determination of key data with practical relevance of typical applications in only one test run. Monitoring of air pollutants and efficiency and continuous improvement of technology possible with test stand method.

THERM-opti-BALCONY: Thermal Optimized Renovation of Balconies

Pre-cast cantilever balconies represent a particular problem in the thermal renovation of buildings. The central goal of this project is the development of practical and cost-effective mounting solutions for the thermally decoupled reconstruction of balconies on building frontages and achieving a significant increase in the energy performance of the thermal renovation measure.

FEELings - User Feedback for Energy Efficiency in Buildings

User behavior is a key factor for the energy consumption and the actual energetic performance of a building. A new type of user feedback system will be investigated in this research project. Users provide feedback on the sensed room quality. The data obtained by the feedback system are used to optimize settings of building services in order to improve the energy efficiency and the comfort in the building. A basic proof of concept of this system will be undertaken by means of two use cases.

Working Party on Industrial Decarbonisation (WPID)

The aim of the Working Party on Industrial Decarbonisation WPID is to provide a platform with a focus on key aspects towards accelerating industrial decarbonisation. The initial focus area of the WPID will be on definitions related to what constitutes climate friendly production standards in heavy industry and how these standards can support successful decarbonisation policies. Thus WPID is working together with IEA members as well as relevant globale private and public stakeholder and supports the IEA office in reporting, benchmarking and foresight.

#EEG++ Digital Energy Communities Optimized

The project aims to develop an innovative energy system for plus-energy neighborhoods by integrating advanced photovoltaic installations, IoT technology, and energy communities to maximize the self-consumption of renewable energy while ensuring economic efficiency and user-centricity.

SOFC4City - SOFC-waste heat utilization for buildings and industry

In this project the application of a solid oxide fuel cell (SOFC) for energy supply (heat and power) of urban areas will be investigated. Due to the high temperature level of the produced heat it would be possible to use this heat for the energy supply of different heat and power consumers (residential buildings, industrial plants, etc.). One aim is to provide the SOFC-heat at several temperature levels in order to establish the advantages of the fuel cell. On the one hand the legal and market-based conditions will be evaluated, on the other hand the technological feasibility will be scoured by the use of CFD-simulation of the heat production.

Gründerzeit with future - subproject 6: dissemination

Dissemination aimed at defining the relevant target groups and broadly distributing the innovative solutions of the flagship project GdZ to the defined target groups. It is of crucial importance to effect a wide awareness level and to make a deep impact on the relevant target groups.

Urban consolidation Lehen - Subproject 3: Demonstration project - intelligent e-monitoring

The aim of the project was the implementation of an innovative energy consumption monitoring concept with the active integration of the residents and a study of the resulting effects on the energy consumption behaviour.

IEA ISGAN Annex 7 - Webinar: A Nordic carbon-neutral energy system enabled by flexibility and storage

30. June 2020
Online

This webinar discusses the flexibility measures enabled by smart grids and sector coupling that can help countries and regions make the deep decarbonisation of their energy systems a reality. It will discuss some of the opportunities and challenges of balancing energy and power in a larger perspective and in some local perspectives in the Nordic countries.

Smart Grids Week Salzburg 09

13. - 15. May 2009
Bayerhamerstrasse 16 Salzburg, AT

Distributed Generation and Smart Grids - A Roadmap for Austria

Competence- and knowledge centre of renewable energies and passive house technology

Arrangement of a passive house village for test living in the context of an innovative settlement expansion. Building up a large dimensioned passive house for consulting, training, exhibitions, research and distribution of passive house technology and know-how in the field of energy efficient and sustainable building.

BIOCOOL - Bio-inspired Surfaces for the Evaporation Cooling of Building Envelopes

The BIOCOOL project will explore the transfer of morphological principles from leaves of deciduous trees, with optimized thermal properties and efficiency of evaporation to the parametric design of form-optimized architectural ceramic surfaces for climate control of building envelopes. The study paves the way for an industrial research project.