Suchergebnisse für "Factsheet: Energietechnologien gestalten, die für alle sinnvoll und nutzbar sind"
CellPor - cellulose polymerized - new methods for the processing of a polymer-cellulose-foam according to ecological criteria in construction
The development of a spray applicable cellulose composite as insulating material on the basis of renewable resources, combined by the development of a prototype for the spray-on technology for processing the new, water free cellulose composite are the demanding challenges of this project.
IEA PVPS Task 12: PV Environmental Health And Safety (working period 2016-2018)
The aim of IEA PVPS Task 12 is to foster international collaboration in the area of photovoltaics and environment. That includes compiling and disseminating accurate Information on environment, health, safety, and other aspects of sustainability associated with the life-cycle of photovoltaics. The austrian contribution addresses LCA, implementation of sustainability aspects and dissemination.
IEA Bioenergy Task "Thermal Gasification of Biomass"
Obtaining, preparation and circulation of information about international evolutions in the field "thermal gasification of biomass" as well as management of different task emphases.
Energy-Sponge: The Building as an Energy-Sponge - Electricity In - Heat Out
Innovative, dynamic control concepts had been developed which enable (air) heat pumps in combination with PV- or renewable grid electricity to use the building mass of a multi-familiy house as heat storage. User acceptance had been evaluated and possible business models had been developed.
aspern Vienna´s Urban Lakeside - subproject 3a: Technology Centre aspern IQ
The demonstration project "Technology centre aspern IQ" showed that the energy required for space conditioning (heating, cooling, ventilation, lighting, hot water) can be covered from domestic energy production.
CityCalc - Calculation Tool for Energy-Efficiency in Urban Planning
To assess the energy performance of urban planning projects in early design stages with low input and evaluation effort within the project CityCalc, an easily applicable planning and evaluation tool has been developed.
Energy-storage concrete: Thermal Component Activation
This planning guide provides information on the option of solely heating and cooling small-volume residential buildings by means of thermal component activation (TCA). Concrete instructions on the planning of residential buildings with thermally-activated ceilings are also provided.
Felix Friembichler, Simon Handler, Klaus Krec, Harald Kuster
Herausgeber: BMVIT
Englisch, 122 Seiten
Downloads zur Publikation
Smart Grids Week 2010
22. - 25. June 2010
Salzburg AG/Congress Salzburg
5020 Salzburg, AT
Austrian Smart Grid Pioneers in Dialogue. Guest Countries: Germany and Switzerland
7th International Summer School - Solar Energy 2003
28. Jul 2003 -
8. Aug 2003
Academia EngiadinaSamedan , CH
Applications - Sustainable Energy Issues
REC-Businesspark - Investigation of the first Austrian renewable energy community business and industrial park
In the course of the project, the conceptual design of a zero-emission or plus-energy business park in Weiz with a focus on photovoltaics and fuel cells in combination with a Renewable Energy Community (E-EGe) had been carried out. By establishing the park on a "greenfield", all structures can be created according to the requirements of the E-EGe.
Urban Future
Erhebung von Forschungsfragen zum Thema "Resource Efficient City of Tomorrow"
Schriftenreihe
83/2010
R. Obernosterer, A. Karitnig, B. Lepuschitz Berichte aus Energie- und Umweltforschung 83/
Herausgeber: BMVIT
Deutsch, 195 Seiten
Downloads zur Publikation
Marktreifes Plus-Energie-Büro
Schriftenreihe
49/2011
B. Reiß, H. Schöberl, M. Leeb, T. Bednar Berichte aus Energie- und Umweltforschung 49/
Herausgeber: BMVIT
Deutsch, 164 Seiten
Downloads zur Publikation
Nachhaltig Thermisch Kühlen
Herausgeber: BMVIT
Deutsch, 118 Seiten
Downloads zur Publikation
Biogas as Vehicle Fuel - Economic Feasibility in Austria
The main objectives of this project are to discuss the economic feasibility of the production and distribution of biogas used as transportation fuel and to identify those types of local distribution systems that are already economically feasible under the present economic conditions in Austria.
ENUMIS - Energetic effects of urban manufacturing in the city
The project examines the challenges of urban manufacturing (UM) from the energy perspective and shows opportunities arising from the implementation of UM concepts for the future design of sustainable energy systems for cities.
Sustainable construction of objects as a product service
Project of a Carinthian plant construction and manufacturing company. They plan to establish a new business division "sustainable construction of premises". This division shall offer a service package for housing, stores, and industrial production sites. This service shall be developed using the approach of RISP.
IEA SHC, Task Solar Thermal Plants with Advance Thermal Storage Technologies for Low Energy Buildings
Participation in TASK 32 "Storage concepts for solar buildings". Subtask leader of the subtask for heat storage based on phase change materials
Innovative moth-protection system for sheepwool insulation
This project developed a novel "bio-pesticide"-formula by screening plant extracts and minerals for their strong repellant activity in order to protect sheepwool insulation from cloth moth infestation. It was investigated and examined by state-of-the-art-technology that the anti-moth-mixture extracted from plants and minerals, acts as a valid alternative to existing pest control agents.
Pilot project gaining-building-land Pongau
Gaining extra space for additional households through sustainable renovation and/or extension of 8 detached houses by integrating consulting, planning, energy efficiency concepts and financing.
BATTBOX - BATTeryrecycling Best Operations by X-processes for circular battery ecosystem
In the BATTBOX project, e-mobility traction batteries are analysed for their cycle capability. The design and structure of battery systems are examined and evaluated regarding potential hazards. Based on this, the best possible handling and processing procedures are developed to improve and optimize the product life cycle regarding safety and recyclability.