Suchergebnisse für "Factsheet: Energietechnologien gestalten, die für alle sinnvoll und nutzbar sind"
ISEC 2024 - International Sustainable Energy Conference
10. – 11. April 2024
Messecongress Graz, Austria
The focus of ISEC 2024 will be on how we can achieve energy sovereignty within a time horizon dictated by climate change and defined by politics.
SYSPEQ - Systemische Lösung zum Betrieb von Plusenergiequartieren
Full-scale planning concepts for positive energy districts (PEDs) and their operation as energy communities (ECs). The focus is on the implementation in the existing building stock, especially in the area of social/non-profit housing. Financing options for renewable generation units, planning and operation of a PED (especially as an EC), marketing opportunities for surplus electricity and the development of an information and networking platform are part of this project. A special highlight is the practical proof-of-concept in Fuchsenloch, which is a social housing quarter of Sozialbau.
P2H-Pot - Potentials, economic feasibility and system solutions for Power-to-Heat
P2H-Pot has identified economically feasible potentials for Power-to-Heat (P2H) in urban regions. The suitability of different technical system configurations were investigated using thermodynamic simulation and considering experiences from Scandinavian cases. The assessment of short, medium and long term relevance and economic feasibility of P2H were accomplished by simulating model-based scenarios up to 2050 of the Austrian and German electricity and heat market. In cooperation with a district heating company three case studies have been carried out.
MODESTORE - Modular High Energy Density Sorption Heat Storage
Seasonal storage of solar heat for use in low energy and passive houses (new buildings as well as old buildings).
Conference: Air Source Heat Pumps in Retrofitting Applications
7th May 2015
AIT Austrian Institute of Technology, Giefinggasse 21210 Vienna, AT
During the conference you will get an overview concerning the state of the art, current development in R&D, trends and perspectives in the field of air source heat pumps for retrofitting applications in urban areas.
circPLAST‐mr Mechanical Recycling of Plastics: Mechanisches Recycling von Kunststoffen: From waste plastics to high‐quality and specification‐compliant recyclates
The flagship project circPLAST‐mr pursues the following 4 main objectives: (1) to identify and explore previously unused potential for mechanical plastics recycling, (2) to define and test key process steps for this on a laboratory/pilot scale, (3) to demonstrate the eco‐efficient marketability of increased recycled plastic volumes, and (4) to demonstrate the scalability of the laboratory/pilot process steps to industrial scale.
Circular Economy Compass (KLW-Komp)
The Circular Economy Compass project will develop a responsive online self-assessment tool for the circular economy in SMEs. Based on a theory-based evaluation scheme, it will be possible to determine a company's degree of preparedness for a circular economy at a reasonable cost. To this end, the tool has a computational logic that automatically generates a circularity score (KPI, Key Performance Indicator) based on the answers.
WHISCERS. Whole House In-Situ Carbon & Emission Reduction Solution
Whiscers is a system for installing internal wall insulation with minimal mess, whilst the resident remains in the property. It involves measuring the walls in the property using a laser device that enables fast and highly accurate measurement. Information is then sent electronically to a computer controlled off-site cutting machine that is rapid, precise and mess-free.
RISKMIN - Risk minimization along the value-added chain of plants to the colouring pigments
RISKMIN is a project for the mitigation of risks along the supply chain of plant raw material to the provision of plant dyestuff. Considering the measures concerning risk mitigation, a business plan for a plant dyestuff manufacturer for the effective realization of the business idea was created.
Mechanical ventilation system for windows for the renovation of old buildings
Analysis and implementation of alternative ventilation systems for windows, focusing on thermal renovation of old buildings. The investigated ventilation systems were presented to an expert group. The aim was to discuss ventilation technologies with the help of different aspects and to develop a SWOT analysis.
Energy Flexible Buildings – Potential and Performance
26th September 2017, 10.00 a.m.
Kuppelsaal TU Wien, Karlsplatz, 1040 Vienna
The aim of this workshop was to bring together international experts and the Austrian building and demand response community for know-how exchange and discussion on the topic of energy-flexibility in buildings and its role for smart grids. The focus was on thermal and electricity based flexibility potential of buildings and practical experience with first implementations and demonstrations.
Refurbishment of a housing complex to passive-house standard, Graz - Dieselweg
Refurbishment of the former "Puch-Siedlung", built as a housing area for employees of the company "Puch", in Graz Liebenau, in the period from the 1950s to 1970s, as an exemplary model for a refurbishment in "passive house standard" with special thoughtfulness to the tenants. "From domestic fuel to solar self sufficiency"
Climate neutral Wiener Neustadt 2040
Wiener Neustadt wants to develop its own vision and implementation strategy for climate neutrality by 2040 and develop it in four steps.
AC/DC Office Buildings - Implementation of Electricity Networks with Alternating and Direct Current in Office Buildings - Feasibility and Energy Efficiency Potentials
Based on a literature and technology review this projects aimed to document and demonstrate already available and reasonable concepts for the implementation of electricity networks with alternating and direct current in modern office buildings. Focus of the study was to assess the feasibility in general and the energy efficiency potential in particular but it also documents necessary technical equipment and expected advantages and disadvantages. Additionally, important research questions for energy supply, energy distribution and application of direct current technologies were formulated.
IEA SHC Task 42/ECES Annex 29: Compact Thermal Energy Storage - Material Development for System Integration
The key accomplishments of the task are summarized in the following points: New material characterizing methods were investigated, a new standard for an improved DSC measurement method has been developed, a data base for PCM, TCM and sorption materials was developed and established, advances in the numerical modelling of materials, compact thermal storage systems were developed for different material applications, a tool for the economic evaluation of thermal energy storages has been developed. Also numerous joint R&D Projects and more than twenty publications arose from the IEA-SHC Task 42 networking activity.
metaTGA - Metadata and process models for open BIM in building service engineering
The objective of this research project is to design a methodology for developing data and process models and to apply them by modelling selected MEP systems. A particular but not exclusive focus is put on the renewable heating technologies, e.g. heat pumps, solar heat and biomass as well as ventilation systems. The data and process models developed in this research project will be scientifically evaluated in two pilot projects. The models, the approaches taken during development and the project team’s experiences with the pilot application of the models will be disseminated openly.
RAARA - Residential Area Augmented Reality Acoustics
Populations with high exposure to noise emissions will generally agree: Noise means trouble. The aim of project RAARA is to develop a simple, intuitive albeit accurate method for reducing noise imissions in urban areas. This method involves placing a noise-source into its planned real-world destination prior to actual installation, by means of augmented reality. The ensuing sound-imissions are then made tangible by means of sound effects and coloured visualizations. This exceptional approach will facilitate planning for heating and cooling devices and thus reduce noise pollution in urban areas. This, in turn, can contribute to an increase in societal acceptance and investment in renewable energy.
FM.Comfort/FM.Ware - Software for optimizing the use of energie and other resources in the virtual house
The expert system FM.Comfort/FM.Ware realizes the so called virtual house (vh). The virtual house is the computer model of a real building. This computer model supports the optimization of the use of energy and other resources by analysis of the life and work habits of the residents and the positive influence on inhabitants-behaviours (user motivation).
Inhabitants-friendly passive house renovation in Klosterneuburg / Kierling
Renovation of an apartment house from the 1970s as passive house using renewable energy.
Sophokles - Solar shading lamellas with photovoltaic coating for climate-neutral, energy-efficient structures
Development of lightweight, strip-like photovoltaic modules that combine shading and emission-free power generation in one monolithic component. The size and module voltage of the photovoltaic blinds can be individually adapted to the conditions of the building. The core of the innovation is an interconnection concept for thin-film solar cells, with which the film-like photovoltaic material can be interconnected in series and in parallel as required.