Search results
There are 1349 results.
Gründerzeit with future: Innovative Modernisation of Wilhelminian style "Gründerzeit" Buildings
This flagship project is focusing on buildings from the late 19th and early 20th century ("Gründerzeit") with typically decorated façades.
Guideline for logistic systems and resource management for renewable resources in Burgenland
The project on hand is applied in the Austrian federal state Burgenland. It investigates possibilities to cover the future biomass demand of the county with resources from the county.
HEATbucket - Urban underground thermal energy storages to enable energy transition
In urban areas, the heat supply and cooling of buildings is one of the key challenges in the course of the energy transition. With HEATbucket, a structural engineering solution is to be investigated for the realisation of underground heat storage in built-up areas. In addition to the technical challenges, the focus is on the general feasibility and the impact on the subsoil and groundwater.
HEDWIG - Collection of measurement data to assess the impact of green buildings
HEDWIG aims for the assessment of effects from green roofs and facades on buildings by using monitoring data referring to microclimate and building physics. The objective is to define validated vegetation parameters and performance indicators on indoor and outdoor level and on microclimatic relevant street space level. Standardised indicators, evaluation and analysis procedures will be elaborated.
HEROES - Houses for Energy- and ResOurce Efficient Settlements
A simplified method will be developed for the calculation of environmental indicators for so far not considered building elements (eg. constructions, which are not thermally relevant and HVAC-components). The theoretical principles for the calculation of the primary energy demand and the CO2-Emissions for operating and raising a building will be harmonized.
HOTSPOTS - Holistic thermographic screening of urban physical objects at transient scales
HOTSPOTS enables new insights and perspectives for city development. According to the project idea innovations in acquisition and sensing as well as densification of geo-referenced city related data are supplemented by novel processing chains in city data analytics. Driven by an integrated scientific approach we develop a novel method in the selection, evaluation and prioritization of infrastructural city development measures which is directly derived from sensed data hence reducing the risk of ad-hoc decisions or lack in impact.
HPZ-Walls - High-performance exterior brick walls without additional thermal insulation
Sustainable multi-storey housing made of bricks can only be realised if the strength of thermally optimised vertical coring bricks is tripled. This is to be achieved by changing the hole pattern, namely by reducing the air gap from 8 to 4 mm. A success of the project will form the basis for the realisation of insulation-free, 8-storey residential and office buildings in brick construction.
HY3GEN - A Regenerative Building
The "third generation hybrid building" (HY3GEN), whose main features are being defined in this project, has expanded this approach to include the integration of aspects of efficient resource utilization in construction and operation as well as the use of regenerative raw materials and renewable energy.
Heat Harvest - Harvest of urban solar excess heat from buildings and surfaces to avoid summer overheating in cities
"Harvest" of solar urban excess heat from building surfaces, sidewalks, streets and squares to avoid urban heat islands by lying flat absorber pipes, which are then fed into geothermal probe storage tanks for later use as a source for heating buildings.
Heat in containers
Storage of industrial waste heat in latent heat storage systems (common transport containers). Use of the heat in commercial enterprises and public or private buildings with integration of conventional energy suppliers. Technical and financial feasibility study.
Heat supply of development areas through supplementary solar supported near heat nets
Evolution of technical solutions for modular open ended near heat nets for development areas that are realized in several configuration levels. Adjusted solar heat and biomass solutions are supposed to be defined by modular construction and decentralized integration.
Hemp Ski, Recyclable ski manufacturing from hemp, bio-resin and waste streams
In industrial production for alpine skis, epoxy resins of fossil origin and pre-impregnated glass fiber reinforcements are processed today. Innovations that replace environmentally critical materials in skis with biogenic substitute materials with an improved environmental balance have so far been limited to the production of small series. This circumstance motivated the consortium to develop a solution for a circular bioeconomy with the HempSki project, which will also make industrial ski production from renewable raw materials and waste streams possible in the future.
Highlights of Factory of Tomorrow, presented on www.nawaro.com
Dissemination of the subprogram Factory of tomorrow's highlights in the field of biopolymer, composites and building material on www.nawaro.com (Information pool for biological materials). Additional current information about biological materials in articles on-line. Networking of relevant companies with the help of a cooperation forum and a database.
Homeservices by the company of tomorrow
Sustainable services in co-operation with the housing sector will be investigated, their effects on environment, employment, acceptance by consumers, hindrances as well as prerequisites for sustainable facility management and a new positioning of concierge systems analysed.
Hook-and-Loop fastener application for the technical building equipment
The aim of this exploration study is to explore a possible systematic change that will allow for a more universal application of Hook-and-Loop (or similar) fasteners in the construction industry, especially in building installation phase.
HotCity - Gamification as a possibility to generate data for energy-oriented neighbourhood planning
The aim of the project was a functional test to determine whether an up-to-date data set of energy-oriented data can be collected for neighbourhood planning through gamification, cost-efficiently, quickly and reliably. This had been determined using the example of the potential determination of industrial and commercial waste heat sources in Vienna and Graz.
Housing 4.0 - digital platform for affordable living
The main aim of this project is the development of an integrated framework for the digital platform "Housing 4.0"; thus supporting integrated planning and project delivery through coupling various digital tools and databases. Thereby, the potentials of BIM for modular, off-site housing assembly in order to improve planning and construction processes, reduce cost and construction time and allow for mass customization will be explored. The novel approach in this project is user-involvement; which has been neglected in recent national and international projects on off-site, modular construction, supported by digital technologies.
HyMeth: Increased Methane and Hydrogen Production and Process Stability by Sensoric Regulation
By deviding the 4 phases of the biogas production in 2 steps and an optimised measurement and control technique the stability of the process, the amount of methane and the efficency of biogas plants is increased.
Hydrogen from renewables in Austria - an energy carrier of the future?
Renewable hydrogen in Austria: Future perspectives for the production and use of hydrogen from renewable energy in Austria with the identification of projects to demonstrate the role of renewable hydrogen in an efficient and flexible energy system.
IDsolutions - Solutions for the refurbishment within existing building stock with interior insulation
The refurbishment of existing building stock demands solutions within single units. Interior insulation is a suitable technology. The challenge is to bring multiple demands and requirements together to create optimal solutions. Therefore it's necessary to arrange individual system components to form working model refurbishment solutions. The development of such solutions is the aim of the project. Not only durability and quality is to be ensured, but also user acceptance. Increasing the rate of refurbishments is the overall aim of the project.