Search results
There are 1240 results.
Potential and concepts for waste water heat recovery in combination with solar collectors and heat pumps (WRGpot)
The objective of the project is to find possibilities for the reduction of heat demand for hot water preparation of low energy and passive house buildings, in order to advance a further step into the direction of plus-energy buildings.
Potential for Growth and Exports of Renewable Energy Systems
Evaluation of mid- and longterm potential for growth and exports in various sectors of renewable energy systems. Analysis of corresponding impacts on employment and value added in Austria. Recommendations for research- and technology development.
PowerShade - Development of electricity-generating shading solutions for energy-flexible buildings in urban space
The main goal of the cooperative R&D project "PowerShade" is the development of low-cost and universally usable electricity-generating shading solutions for energy-flexible buildings in urban space.
Presentation of the effective use of innovative bioenergy technologies in the Austrian energy system of the future (BioEff)
The study shows possibilities and strategies for the effective use of innovative bioenergy technologies in Austria.
ProKlim - Optimisation of Energy Efficiency of automated indoor climate systems by using weather forecasts
Investigation of the basic energy savings potential for buildings in commercial use by including weather forecasts as a variable. Additionally, a concept for integrating weather forecasts into the heating and air conditioning control systems in buildings is planned to be developed. Within the scope of the feasibility study, a detailed analysis of technological possibilities, including both hardware and software, will be conducted.
ProKlim+ - Use of Model Predictive Control to optimize solar power consumption in case of increased energy efficiency.
Using weather forecast for building automation can help improving the energy efficiency of buildings and, thus, saving energy. In the project ProKlim+ the forecast of solar radiation will be used to optimize the building automation to satisfy the needs of the building users, and at the same time to minimize the energy demand on the one hand and to maximize the consumption of self-produced energy on the other hand.
Probing for PV façade systems made of lightweight plastic modules with reversible fittings for new and old buildings (PV-FAS_light + easy)
Probing for a new, simple, cost-effective and building-integrated PV facade system made of plastic PV modules through initial investigations for fixing technology, for building physics, for fire protection and for electrical engineering concerning the usability, the areas of applicability and the yield and application potentialfor new buildings and for existing buildings.
Processing of filter residues of the beer - brewing process for the production of an innovative pharmaceutical substance
The latest technology for the filtration of beer is the use of ion exchangers. The reclaim contains high-potent substances (vitamins and minerals from the yeast, hops and other proteins) in concentrated form which should be processed and characterised. In a further step this substance should be the main ingredient of a food supplement. After a technical adaptation this concept can be used within other ranges of the food and natural substance industry.
Product Service Systems Water
Based on former FdZ projects in the area of PSS, EMA and Zero Emission PSS Water develops and realises a guideline with which sustainable water management in industry and public utiliies as a service can be offered.
Product service systems without risk (RISP)
In RISP a process model for the development of product-services is worked out, which consists of seven steps and so called "gates" between the single steps. The questions which have to be answered before entering the gates to the next step are derived from a failure mode and the effect analysis of the single steps.
Product-related Environmental Information Systems in Austrian Companies
Inventory of product-related environmental information systems, survey of implementations within Austrian companies, and analysis with respect to principle applications
Production and upgrading of fermentation gas at the location Wals-Siezenheim to be feed into the natural gas distribution network
Production and multistage purification process of approx. 150 m³/ h biogas in Wals-Siezenheim. Prove the feasibility of trouble-free feeding of biogas into the natural gas grid of the Salzburg AG within an operation period of 3 years.
Production management for sawmills based on flow of material, energy and production orders
A comprehensive planning approach for the short term flow of material, energy and production orders in sawmills in order to improve the value added in the wood supply network.
Production of bioethanol from lignocelluloses using steam explosion
By means of suitable thermomechanical pretreatment a process for the production of bioethanol on the basis of the waste compounds straw and wood will be developed. Regional plants will use local raw materials for local energy production.
Production of bioethanol in addition with heat, power and valuable byproducts
The production of bioethanol in Bruck/Leitha in addition to the production of heat, power and valuable by-products from biomass will be optimized by a new process simulation tool under the target of maximum usage of waste and low temperature heat and optimal source and product usage.
Programme Evaluation of "City of Tomorrow" 2013 - 2021
This evaluation examined the effects that the "City of Tomorrow" programme has achieved since its inception. The evaluation is based on extensive surveys of research project participants and various multipliers from application areas such as civil engineering and urban planning. The evaluation thereby creates an important basis for the design of future research funding.
Pyrolysis technologies in Europe
Technology overview of medium-fast pyrolysis for decentralised applications, for small and medium-sized enterprises and for the circular economy
P³Power - Plug&Play Storage of Photovoltaic Power
The core of the project P³Power is the measurement technology NetDetection, which is able to detect the power consumption of a household from any point, e.g. a regular wall socket. Based on this technology a plug&play powerplant, consisting of photovoltaics and battery pack, is realized. The system is able to guarantee 100% self-consumption within flexible aggregates (from single households to whole communes) without any changes of existing infrastructure. The measurement technology will be implemented into digital hardware, evaluated comprehensively in lab and household environment and subsequently new energy service business models are developed.
QB3R – Quality controlled high‐performance components consisting of 100% bio‐based resins with high potential in repair and recycling
The QB3R project aims to develop an epoxy resin system having a 100% bio‐based carbon content. The QB3R resin will be processable with various different manufacturing techniques resulting in high performance components for long‐lasting material goods.
Quality criteria for the Building of Tomorrow
Development and implementation of contributions to the quality control of innovative technologies in the areas of building services and insulation that are derived substantially from HAUSderZukunft findings.