Search results
There are 1388 results.
MasSan - Feasibility study of serial renovation concepts & models in Austria
Feasibility study to present and analyze the framework conditions and potential of serial renovations of large-volume buildings. The findings from the national pilot projects as well as the international / German projects and models are extracted and checked for their feasibility in the Austrian context and the requirements are prepared.
Material utilization of end-of-term textiles
Mechanical processing of the non-reusable part of collected end-of-life apparels (e.g. cutting, sifting, etc.); development of marketable application for the obtained short fibers in the field of construction materials (e.g. bitumen modification)
Mechanical ventilation system for windows for the renovation of old buildings
Analysis and implementation of alternative ventilation systems for windows, focusing on thermal renovation of old buildings. The investigated ventilation systems were presented to an expert group. The aim was to discuss ventilation technologies with the help of different aspects and to develop a SWOT analysis.
MehrWertStrom 2030 - PV-Community system - Exploring a participatory pilot project with regional added value for structurally weak regions
The "MehrWertStrom 2030" project analysed the legal, technical, organizational and economic feasibility of PV community joint venture facilities on multi-party buildings including the added value for structurally weak regions and developed innovative solutions related to organization, financing and realization.
MeteoR – mechanical-thermochemical process combinations for the recycling of fine fractions from waste treatment facilities
In waste treatment plants large quantities of fine fractions are generated. Due to their heterogeneity and properties, these fractions are currently not used although they contain a whole range of materials that represent valuable resources. The aim of the project MeteoR is to enable the utilization of all components (mineral, metallic, and combustible) of fine fractions by combining mechanical and thermochemical processes, to close material cycles and to significantly contribute to the further development of the Austrian circular economy and the reduction of CO2 emissions.
Methodical optimisation of biogas plants based on strategic learning from realised plants and projects.
Methodical optimisation of biogas plants based on the preparation and presentation of affirmative experiences and mistakes from the realisation of plants in the past. Combination of experiences from different industrial sectors (designer of plants, assemblers, consulters and operators)
Micro Gas Turbine
Mission2030 – Climate-neutral Smart City Klagenfurt 2030
As Austria's only city, Klagenfurt is part of the EU Cities Mission 2030. Along with Rome, Barcelona, Laibach and other European cities, the Carinthian state capital has set itself the goal of being climate neutral by 2030. A project that is not utopia, but quite realistic! An essential component and backbone of this mission is the Austrian Pioneer Cities Program.
Mobile and modular thermally-driven-cooling-system
Development of a mobile and modular thermally-driven-cooling-system for cooling powers ranging from 17 to 210 kW. The driving heat is provided by solar collectors and a biomass boiler. For research purposes a cooling systems (70 kW) will be installed in Gleisdorf where the company EnergyCabin is located.
Model Predictive Control of Thermally Active Building Systems and Monitoring of two Test-Boxes
A robust, predictive controller which utilises weather forecast data to control thermally active building systems had been designed, researched and assessed in terms of energy efficiency and comfort compared to standard controllers, especially for cooling purposes. Simulations and real measurements using two "Test-Boxes" with thermally active building systems which are constructed and built for this purpose were used to analyse energy efficiency and comfort. Low complexity and transparency of methods and solutions should allow for transferability of all results to guarantee maximum usability for similar applications.
Modular and standardised passive houses in solid timber construction
Concerning to an accurate and adaptable construction of 2 to 4 storey solid timber houses with the characteristics of a passive house, a digital construction and dimension system will be developed. The system which contains standardised modular ecological detailed solutions enables an exact dimensioning and installation of passive houses by small carpentering companies.
ModularHeatNet
The aim of the project is to support Ottensheim in phasing out fossil fuels and developing a "climate-neutral" heat supply. As a result, the community will receive a solid decision-making basis based on the technical, economic, organizational, and environmental comparison of the examined heat supply approaches.
MokiG: Monitoring for climate-neutral buildings
The aim is to develop and implement an innovative monitoring concept to demonstrate the achievement of climate neutrality in buildings. A central element here is the integration and linking of various data sources. The basis for this is a data mesh structure, artificial intelligence and the creation of digital twins. Finally, the methodology will be tested on real buildings and discussed with users.
Monitoring Passive houses China
Monitoring of office building and guest house in ZhuoZhou, China
Monitoring Sunhouse Eferding
In course of the monitoring project the effectiveness of the energy-technical system was checked on the basis of running measuring data. The data were evaluated and, if required, the arrangements and settings of the control system were adapted. Main result is that the energy balance could have been improved explicitly whilst the monitoring process.
Monitoring of multi-family houses “Tonpfeifengasse”
Evaluation of activated building parts as heat storage for renewable energy shown on the example of the multi-family houses "Tonpfeifengasse".
Morphology of a City - The Austrian Built Environment
This study uses several data sources to analyze the effects of the research programe "Haus der Zukunft" ("Building of Tomorrow") on the Austrian housebuilding industry and the built environment.
Move2Grid – Implementation of regional energy-supply-concepts by hybrid coupling
Based on the results of the national-funded exploratory projects called “Smart Exergy Leoben”, and “Energy Sponge Bruck”, the present implementation project aims at analysing how local, renewable resources support the supply of electric mobility in Leoben in the long term and to integrate it into the municipal distribution grid in a good economic sense.
MuT - Monitoring of urban Technologies: Classification, Specification, Evaluation
In the frame of the project a classification system for Smart City Technologies had beed developed, the relevance of a wide range of technologies in terms of their potential contribution to the development of sustainable and more resilient cities with a high quality of life had beed evaluated and a comprehensive classification of the technical maturity of relevant technologies, technical (sub-)systems and technology-related services had been given.
Multi-Activ-Facade
Multi-Activ-Facade is a pre-manufactured, multifunctional panellised façade, which incorporates ventilation with heat recovery, passive house windows and photovoltaic for smart self-supply within retrofitting measures. The specific challenge is the application within social housing.