Suchergebnisse
Resource-saving and sustainable production of high-quality steel by enhanced on-line control of stirring efficiency in vacuum degassing (SUSPRISE Joint Call)
For vacuum degassing of liquid steel, as it is used for production of high quality steel grades, an improved on-line monitoring and control system will be developed and applied. Thus the reliability of the vacuum degassing process will be improved, and simultaneously the consumption of energy and resources will be reduced.
Development of methods and procedures to automate the operative production control and scheduling considering the aspects of sustainability
The production order doesn't only influence logistic and operational ratios, but also shows effects on the environment as well as ergonomics and the staff's psychology. Aim of the project was to develop a method to optimize the job order planning in consideration of an integrated evaluation in terms of sustainable economic activity.
Strategic optimisation of the regulation of air moisture through ventilation systems to reduce energy demand for humidifiers and dehumidifiers
For the validation of coupled room and building component simulations, an analytical solution of this unsteady problem was developed. Finally, a simplified method for determining the humidification and dehumidification demands considering a room's effective moisture capacity was developed.
SUBURBAHN – test- and demonstration-area for urban development and mobility around public transport stations in the central area of Upper Austria
Targeted, process-oriented conception for the implementation and operation of a test- and demonstration-area for urban development and mobility in Ansfelden involving relevant scientific stakeholders, local and regional stakeholders, decision-makers as well as the interested public according to the living lab approach.
Active know-how-transfer sustainable building with renewable raw materials - lecture in theory and practice at the Technical University of Vienna
Lecture "Sustainable Building with Renewable Resources" focusing on theoretical and practical knowledge of straw bale building and including relevant research results of "Building of Tomorrow "
Smart.Monitor – SMART city indicators and MONITORing for smart city objectives – based on the example of the Smart City Vienna Framework Strategy
Elaborating and preparing the basic information and data required to conceptualize indicators and a monitoring system for the smart city framework strategy. The results shall support the future monitoring of the Smart City Vienna Framework Strategy.
Passivhauswohnen³: Facility Management for Residential Property Developers: A Key to Optimizing the Reduction of Energy and Operation Costs
What soon will be considered "standard" in ecological building must be carried out by the property developer and accepted by the future user. Therefore, in order to assist a smooth implementation of the new passive housing technique and begin the corresponding feedback mechanisms, a specific KMU "quality and incentive model" should be launched. The interrelationship of this model is designed with the property developer as well as the user in mind and aims for lasting "behavior modification" in energy and operational expense consumption.
SolarCooling Monitor - Evaluation of energy efficiency and operation modes of solar cooling systems for air-conditioning in buildings in Austria
Evaluation of ten newly installed solarthermal cooling systems in Austria as well as a large-scale plant in Lisbon to identify the plant’s performance using a monitoring analysis and comparing simulation.
Energy relevant and ecological monitoring studies of demonstration buildings, which were built in the framework of the program "Haus der Zukunft".
Energy relevant and ecological monitoring studies of demonstration buildings, which were built in the framework of the program "Haus der Zukunft". The user acceptance should also be levied and displayed
IEA User-Centred Energy Systems "TCP Day": Solutions for an inclusive energy transition
6. April 2022
FFG - Sensengasse 1, 1090 Wien (Building: "Haus der Forschung"; Room: "Franziska Seidl")
The Users Technology Collaboration Programme (TCP) day was dedicated to socio-technical topics of the energy transition, such as the involvement of users in innovation processes. Topics of the TCP day were current activities and highlights of the work within the Users TCP and input from other IEA TCPs with Austrian participation, addressing the topic of "inclusive energy transition".
Oekosan 09 - International symposium for high-quality energetic renovation of large-scale buildings
From October 7 to 9, 2009 the AEE INTEC has organized an international symposium "Ökosan 09". The emphasis of the symposium was the communication of (partial) results of running and closed cooperation projects by leading technical experts dealing with the retrofit of large-scale buildings.
Practice Guide for Sustainable Building Sanitation and Modernisation within Construction Intents
A checklist considering priority, construction progress and actors is elaborated to serve a future-oriented selection of materials, energy carriers, design and construction within building sanitation, under a deliberate consideration of the involved actors from the construction branch
New Corporate Approaches Towards Sustainability In Management Accounting
EMA - Environmental Management Accounting Integrated Management - Cost-/Benefit Check
Forschungsforum
3/2003
Herausgeber: BMVIT
Englisch, 6 Seiten
Downloads zur Publikation
Stakeholder process of the initiative "Reference architecture for secure Smart Grids in Austria"
The project worked out the development of a smart grids reference architecture for Austria under involvement of all actors. Based on technological-scientific elements a process which met the requirements of stakeholders like operators of infrastructure, industry and also public agencies had been worked out to achieve nationally accepted and internationally orientated reference architecture.
Know-How-Plus - Options and constraints of building renovation towards plus energy building standard
Aim of this research project is to identify the realizable reduction potential of energy consumption and CO2 emissions by refurbishment of the Austrian building stock towards plus energy building standard. Furthermore a construction-oriented manual will be supplied for interdisciplinary planning.
Development of a "Light Well" for daylight transparent, highly energy-efficient, multi-story buildings
Daylight supply of multi-story buildings with the help of rooflight openings. Reflecting vertical ducts transport light down to the lowermost floor. The idea promises new building structures with daylight transparency and high energy-efficiency that have a minimal demand of artificial light and cooling at optimal comfort.
Model Predictive Control of Thermally Active Building Systems and Monitoring of two Test-Boxes
A robust, predictive controller which utilises weather forecast data to control thermally active building systems had been designed, researched and assessed in terms of energy efficiency and comfort compared to standard controllers, especially for cooling purposes. Simulations and real measurements using two "Test-Boxes" with thermally active building systems which are constructed and built for this purpose were used to analyse energy efficiency and comfort. Low complexity and transparency of methods and solutions should allow for transferability of all results to guarantee maximum usability for similar applications.
Energy Plus House Weber - highest energy efficiency in the tension between tradition and modernity
The tension between tradition and modernity is shown and exemplarily solved on the example of the historic farmhouse "vulgo Weber". The object was converted into an energy plus house with an exceptionally holistic approach and also thought as a demonstration object for a broad public through the touristic use of the house.
Raising efficiency by an optimized filters purification system using waste heat in metal industry
Purification and disposal of production effluents in waste water from metal manu¬fakturing processes is of economical and ecological importance for the Joh. Pengg AG. Econamical solutions for optimised purification of the filter textiles and the drying of the filter cake with waste heat have been found.
Urban wind energy - Development of methods for the assessment of small wind turbines in urban areas
The project "Urban wind energy" aims to create the basis for the assessment of roof-mounted small wind turbines (SWT) in urban areas. Therefore, methods for the characterisation of turbulent wind flow fields are developed and on the other hand the impacts of turbulent wind conditions with reference to selected turbulence indicators on the performance of small wind turbines are investigated. The overall aim of the project is to address the question how to evaluate sites in urban areas for the application of small wind turbines.