Suchergebnisse
Feasibility concept for a customer-focused and resource-efficient production of wood-products, considering a parquet factory as an example
An innovative approach aiming higher resource-efficiency and added value by using new quality standards and production systems in parquet industry. A customer friendly product will be possible by combining industrial production methods with the flexibilty of a manufacture.
Product and system development for an inside thermal insulation construction of historical houses using magnesite bonded wood wool panels
The objective of this project is to examine the ability of magnesite bonded wood wool panels as an inside thermal insulation system, especially for houses with historical facades and to acquire starting points for further development of the products and components being used. Parallel to the data which will be calculated in a theoretical FEM-model, a field trial will be carried out to prove the influence on the inside room climate. In addition the sustainability of the system will be analysed.
Creating a concept for the development of a "lubrication service" to maximize plant life on the basis of ionic liquids as special lubricants.
Creating a concept of a "lubrication service" to maximize plant life and reduce their resources consumption - a combination of development service, production and lubricating service.
Climate protection in Schools: a prototype for targeted oriented knowledge transfer for students on the basis of energy efficient buildings
The saying "Was Hänschen nicht lernt, lernt Hans nimmermehr." which can be translated with the English saying "You can´t teach an old dog new tricks." especially applies to the issue of "climate protection" in general. Therefore children must be made aware of the importance of the subject from the beginning on in order to live their life efficiently and environmentally friendly. Based on a research and on an evaluation of existing teaching materials teachers and students will develop, how students understand the topic "climate protection" with a focus on "building and living in the future" the easiest way.
Active transfer from "Building of tomorrow" Know How to the network "partner network sustainable construction Charinthia, nabaupool Charinthia"
Knowledge transfer from "Building of tomorrow" projects into the network "partner network sustainable construction Charinthia, nabaupool Charinthia" consisting of key actors of the building sector. Establishing a "Building of tomorrow" knowledge transfer centre Charinthia including infrastructure (Library) for all actors of the building sector. Conference and workshop with key actors (24.11.2006) taking place in Technologiepark Villach.
Energy centre for the thermal conversion of biogenous raw materials and residues of a region to produce heat, electricity, SNG and liquid biofuels II
Production of synthesis gas from biological fuels and residues using steam blown gasification. This synthesis gas will be used for polygeneration especially for heat, power, gaseous and/or liquid fuels.
Basic research on fixing elements: drawing up universal design guidelines for high resilience mechanical jointing techniques for insulation products
The objective of this project is to explore mechanical insulant-fixing connections. Unconventional but concrete fixing techniques are the focus of the investigation. The use of insulants as "lost" casing will also be studied in depth.
Information point for renewable and ecological materials (II) internet platform, information and service offer and transfer event "Building of Tomorrow"
Establishment of www.nawaro.comas the central platform for building materials made of renewable resources will be realised with the help of the enlargement of the internet database and extensive service and information offer consisting of stake holder support, events, PR and transfer for "House of Tomorrow.
Integrated ecological and energy-oriented refurbishment of service buildings - development of quality criteria and tools within a pilot project (LCC-ECO)
Formulation of a procedure for the general refurbishment of service buildings and development of guidelines to support building owners and facility-managers in each stage of the refurbishment process in order to reach an integrated ecological and energy-oriented refurbishment.
EasyCell - Design optimization of PEM fuel cells for reducing auxilliaries and simplificating the material-management to facilitate the mass production
EasyCell - A common use of PEM fuel cells is not yet established. It is the aim of this project to optimize the design of PEM fuel cells (minimization of peripheral units, simplified handling of gases and the right design for mass production) to ease a widespread use of PEM fuel cells.
aspern Vienna´s Urban Lakeside - subproject 1: Public Space and Micro Climate: Basics for climate sensitive planning in Aspern
The Project will derive planning examples and recommendations in order to optimize the building performance as well as outdoor amenity. The study will be based on a climate prognosis of the aspern area and compare different reference examples of construction and open space design.
The very first reconstruction in Austria of a one-unit house to passive house standard (Model project in Pettenbach/Upper Austria)
The main objective is the unprecedented reconstruction of older one-unit buildings to the standards of passive houses. The reconstruction estates are of the numerous older one-unit houses in Austria. The reconstruction will considerably enhance the convenience of living quarters in the old houses.
PROMISE - Production with solar energy. Study on the potential of thermal solar energy systems in trade and industry depending on the production processes
Documentation of realized plants for the use of thermal solar energy in trade and industry companies. Identification of production processes and branches, which have a demand for low-temperature heat. Determine the potential of solarthermal systems to provide low-temperature heat. Case studies for branches and processes with the highest mid-term potential for realization of a solar plant.
Development of methods and procedures to automate the operative production control and scheduling considering the aspects of sustainability
The production order doesn't only influence logistic and operational ratios, but also shows effects on the environment as well as ergonomics and the staff's psychology. Aim of the project was to develop a method to optimize the job order planning in consideration of an integrated evaluation in terms of sustainable economic activity.
Resource-saving and sustainable production of high-quality steel by enhanced on-line control of stirring efficiency in vacuum degassing (SUSPRISE Joint Call)
For vacuum degassing of liquid steel, as it is used for production of high quality steel grades, an improved on-line monitoring and control system will be developed and applied. Thus the reliability of the vacuum degassing process will be improved, and simultaneously the consumption of energy and resources will be reduced.
Using buildings as energy storage - Monitoring project: Detached house H and detached house F Energy source wind power – Energy source solar power
Monitoring and comparison of performance of thermally activated building components in two similarly built, inhabited detached houses with different energy sources (wind and solar power). The functionality of energy supply through wind power or solar energy will be investigated as well as the verification of the practicability of self-regulating system control due to building temperature behaviour. The results provide an insight into the calculation assumptions, system control and feasibility of the smart grid technology.
Sustainability Reporting - Guidelines for Sustainability Reporting based on reporting processes of VA Technologie and Österreichische Bundesforste
Scientific attendance of sustainability reporting processes in two partner enterprises (VA Tech and ÖBf AG). Development of the guideline "Reporting about Sustainability" based on these practical experiences.
Total Quality Design and Assessment of buildings as a strategy to increase the level of know-how with regard to the issue of "sustainable buildings".
Total Quality Design and Assessment is an instrument to increase the demand for high quality buildings; "high quality" in terms of improved comfort as well as decrease in negative environmental impact, at affordable costs. Application of TQ design targets requires additional and new knowledge, thus increasing the level of know-how with regard to the issue of "sustainable buildings".
Increase in Sales of Vegetable Oils from Austrian Oilseeds by Increase of the Technical Grade with Regard to the Demands of the Varnishing Industry
The cultivation of flax (linseed) in Austria should be enhanced by arrangements to increase the technical grade of linseed oil produced. Austrian agriculture should be enabled to provide raw materials sufficient in batch and technical grade for the Austrian varnishing industry.
Demonstration building of the eco²building system: First passive house prefabricated wood building system for commercial and industrial buildings
The EU funded "eco2building" construction system in a timber-frame based modular design represents a systematic approach for energy efficient commercial and industrial buildings. The object of the eco²building demonstration project - the logistics centre in passive-house quality for "Eine Welt Handel AG" - in Niklasdorf was to optimize the planning and construction processes and prepare for the market launch of the eco²building construction system. Accompanying research monitored and disseminated the experience.