Suchergebnisse
P³Power - Plug&Play Storage of Photovoltaic Power
The core of the project P³Power is the measurement technology NetDetection, which is able to detect the power consumption of a household from any point, e.g. a regular wall socket. Based on this technology a plug&play powerplant, consisting of photovoltaics and battery pack, is realized. The system is able to guarantee 100% self-consumption within flexible aggregates (from single households to whole communes) without any changes of existing infrastructure. The measurement technology will be implemented into digital hardware, evaluated comprehensively in lab and household environment and subsequently new energy service business models are developed.
The Box - Thermal High Performance Decoupling - Next Generation Thermal Break Technology
The project pursues the overall strategic objective "solution of the problem-inducing heat bridge". For this purpose, the thermal bridging losses should be reduced by the factor of 15 in contrast to the state of the art. The significant increase in efficiency should rely on existing system solutions, but incorporating a new holistic view in terms of construction, geometry and materials.
SolCalc: Development of a standardized calculation algorithm for the energy consumption assessment and the energy certification of residential buildings with a solar fraction of up to 100% in combination with biomass boilers and heat pumps
Development of a standardized calculation algorithm for the energy consumption assessment and the energy certification of residential buildings with a solar fraction of up to 100% in combination with biomass boilers and heat pumps
S - House
Innovative Use of Renewable Resources demonstrated by means of an Office and Exhibition Building
Anergy2Plus - Demonstration and expansion of an anergy network as part of a holistic energy concept and plus energy quarter
The overall objective of the project is to pursue and demonstrate a holistic approach to the design, construction and ultimately the use of the residential quarter in the context of energy supply. Especially in the area of thermal energy supply, a project with lighthouse character on the way to a plus-energy quarter is to be created by demonstrating the innovative supply concept based on an anergy network.
Circular Twin - A Digital Ecosystem for the Generation and Evaluation of Circular Digital Twins
By 2030, more than the equivalent of two Earths will be needed to meet the demand for natural resources, therefore a transition to circular systems is essential, especially in the construction industry. The digital "Circular Twin" ecosystem enables the early implementation of circular economy goals as well as end-to-end digitalization in construction utilizing Digital Twins, Generative Design Algorithms and Virtual Reality.
Cool Windows - Windows with shading optimising the trade-off between summery overheating, wintery heat protection and adequate illumination
Windows with their associated components such as sun and glare protection are optimised as a holistic building equipment unit regarding different seasonal requirements in light of the climate crisis. The results serve as a basis for new developments in the window and shading technology in order to provide summery and wintery heat protection as well as adequate natural illumination over the year.
Salzburg:KanS - Salzburg: Climate-neutral city
Salzburg:KanS aligns the vision and climate protection goals of the city of Salzburg with the climate neutrality targets of the province and estimates the sector-specific CO2 reduction contributions until 2030. Based on these contributions, the project develops implementation strategies for the entire city as well as the focus areas of “climate-neutral mobility” and “climate-neutral neighborhoods”.
Joining Cards - Investigation of de-constructable fastening and joining techniques for the development of mono-material interior systems made of cardboard
Strategic examination of cardboard products and paper-based materials for the development of de-constructible interior systems and the definition of building components and their interfaces. The result forms the basis for further research projects in the form of a comprehensive knowledge gain.
EnerPHit-green concept Modernisation of a historic building with application of an aerogel insulation plaster
This demonstration project shows the comprehensive modernization of a historic building within the constraints of a regional protection zone. By using the Aerogel high-performance insulating plaster, a comprehensive energy-efficient building refurbishment had been realized without changing the outer appearance of the façade.
Build4Climate - Demonstration building with a climate room concept at the Innovation Quarter Lavanttal in Carinthia
Near the Wörthersee in Carinthia a modern open-space research and office building with flexible use is being built on the site of Lakeside Science & Technology Park GmbH. The innovative building will be implemented as a frontrunner with a 'climate room' concept based on thermal component activation and extensive use of renewable energy sources.
Energy-Sponge: The Building as an Energy-Sponge - Electricity In - Heat Out
Innovative, dynamic control concepts had been developed which enable (air) heat pumps in combination with PV- or renewable grid electricity to use the building mass of a multi-familiy house as heat storage. User acceptance had been evaluated and possible business models had been developed.
ReTarget - Re-manufacturing and re-purposing of high-quality sputter materials
The project objective is to reduce the energy input in the production of sputtering targets by at least 20 % by direct re-manufacturing of used, precious metal targets. In addition, the utilization rate will be increased from an average of 20-30 % to 70-80 % through a direct re-purpose approach, as well as by optimizing the sputtering process. This will allow a significant reduction of the footprint of the sputtering process.
E.Vent – Efficient, cost-effective and low-maintenance central ventilation systems for multi-family housing – Design, operation and fire protection measures
Die Synopsis ist eine drei- bis vierzeilige Beschreibung des Projektinhalts alsErgänzung zum Titel und nähere Erläuterung des Projekts.
BONSEI! Optimal use of existing buildings – energy efficient implementation of renovation!
The project BONSEI! would like to support an energy efficient and socially acceptable densification of privately owned residential buildings in urban space and to develop a methodological basis for resource efficient urban areas. The results are used for the conception of an innovative service in order to provide a neutral consulting regarding private densification plans.
FiTNeS - Facade integrated modular Split-heat pump for new buildings and refurbishment
The goal of FitNeS was the development of modular split heat pumps with compact and silent façade-integrated outdoor units for heating and domestic hot water preparation (and optionally cooling in combination with PV). The outstanding features of the concept are a modular design with a high degree of prefabrication and representing a visually and architectonically attractive, economic and sustainable solution for both new constructions and renovations. One of the main development goals is the minimization of sound emissions by means of optimized flow control.
Mission
Until the mid 1970‘s energy supply policy was a side issue for the industrialized nations: all the energy services needed could be provided with the fossil sources of energy available in the market.The oil crisis in October 1973 was a turning-point in national and international energy policies – for the first time the extent of dependence on the oil-exporting countries was revealed, and the security of the supply of energy in future seemed to be in jeopardy.
SPIDER - Subtraction as a measure to Preserve and Insulate historic Developments by Electric Robots
The purpose of this exploration is to unlock the potential of autonomous, data-driven robots that achieve improvements of the thermal building performance through air entrapments in a continuous process.
Road-to-Road/ Verschränkung neuartiger Methoden zur effizienten „Road-to-Road“ Inwertsetzung von Altasphalt
The planned combination of experimental and model-based methods for assessing/describing the behavior of asphalt shall enable the goal-oriented optimization of the performance/durability of recycled asphalt, with the resulting positive effects (CO2 balance, transport distances, landfill volume) being quantified within the project.
RE-FORM earth - Earth Building for Building Sector Transformation
In order to promote the use of earth, the RE-FORM earth project is creating a planning basis for the construction of structures and buildings containing earth. In order to counter uncertainties regarding the health effects of earth building materials, a comprehensive program is being carried out to investigate radiation exposure and potential pollutants in earth. By erecting a temperature-controlled rammed earth wall in a test room with subsequent measurements, the aim is to determine the extent to which the material can contribute to healthy indoor air due to its moisture-regulating properties and help to balance out energy peaks.