Suchergebnisse
Innovative technology for the treatment of municipal and industrial waste water and process waters (INNOWATEC)
Evaluation of a technology as a supporting module for process water and waste water treatment and testing in laboratory and pilot tests for specific fields of application in operational water management.
InnoGOK – Investigation of the energetic and ecological usability of solar radiation on urban spaces and paths
Examination of the suitability of street space or other paved or not paved surfaces in urban areas for promoting renewable heat from solar radiation. Thus offers a high potential for increasing energy efficiency and conserving resources in urban contexts. Besides, the dissipation of heat from large solar-heated surfaces promises to prevent urban heat islands.
Newsletter 6/2014 der Europäischen Technologieplattform für Heizen und Kühlen mit Erneuerbaren
Herausgeber: RHC European Technology Platform
Englisch, 10 Seiten
Downloads zur Publikation
Workshop: Key Technologies for Future Energy Systems - Solar Heating and Cooling and Energy Storage
8. November 2011
University of Applied Sciences, Hochschulstrasse 1Rosenheim, DE
Results of international collaborative R&D work in the fields of the IEA Energy Conservation through Energy Storage Programme (ECES) and the IEA Solar Heating and Cooling Programme (SHC).
"gugler! build & print triple zero" - subproject 6: Integration of the C2C production into the flagship project Gugler
Print and media production at the media and communications company gugler GmbH are currently being optimized according to Cradle to Cradle (C2C) criteria. The goal of this subproject is to allow the demands of a C2C production process optimized for exchange with biological cycles to be included into the general planning of the new production building of the company, a pilot project within the "building of tomorrow" program line.
Using the Sustainability Balanced Scorecard (SBSC) at operational and inter-operational level (ÖKOPROFIT) for reconciliating the systems of objectives in the realm of sustainability
Further development and implementation of the sustainability scorecard for definition of sustainable objectives on cross-company level (local agenda 21 project ÖKOPROFIT) and company level. Comparing the target systems.
Evaluation of the planning and building processes of multi-storey wooden construction residential and office buildings, and the development of measures to optimise these processes.
An analysis of the building and planning processes of multi-storey wooden construction residential and office buildings, taking into consideration the opinions of the professionals involved (planners, building contractors, building executives), then the development, documentation and distribution of ways to optimise these processes, using "Info-Tool" software.
OPTISOL - Demonstration objects accompanied by measurement techniques for optimised and standardised solar systems in the construction of residential buildings for several families
The implementation of optimised solar heat supply systems in the construction of residential buildings for several families within the framework of an in-depth test.
Report "Transition from Uni-Directional to Bi-Directional Distribution Grids: Management Summary of IEA Task 14 Subtask 2 - Recommendations based on Global Experience" (2014)
Um den Anteil von Photovoltaik in elektrischen Verteilnetzen weiter zu erhöhen werden in diesem Bericht technische Implementierungsmöglichkeiten erläutert. Die Herausforderungen auf unterschiedlichen Spannungsebenen im Verteilnetzbetrieb werden darin erläutert und Konzepte aufgezeigt die in einigen Ländern bereits umgesetzt wurden, um den Übergang von unidirektionalen zu bidirektionalen Verteilnetzen zu ermöglichen.
Herausgeber: IEA Photovoltaic Power Systems Programme
Englisch, 35 Seiten
Downloads zur Publikation
First energy autonomous revitalization of an urban former industry quarter with the standard type of "Passive House" to reduce primary energy max. 100 kWh/m2 NFL
A renovation with the energy efficient factor 10+ of a former industry quarter in the standard type of passive house with usage of the most modern technologies and locally renewable energy resources.
Development of a comprehensive procedure within the design of high-speed-cutting processes in consideration of environmental protection and occupational health aspects
In the metal working industry high-speed-cutting (HSC) in connection with minimal quantity cooling-lubrication promises a high potential for saving process materials. On the one hand costs of purchase and disposal of metal working fluids (MWF) decrease, on the other hand the reduction of dermal diseases and emissions of MWF-dusts are expected.
OEKOPLUS-KOMPLEX - Analysis of the technical, economical and ecological preconditions for the establishment and utilisation of plus-energy-buildings and building assemblies
The evolution of the low energy house and the passive house standards to the plus energy standard results in a clear reduction of green house gas emissions as well as the primary energy input. The goal of the project was the determination of the technical, ecological and economic basic conditions for the construction and the use of "plus-energy-buildings" in order to finally realize them.
GreenPlusSchool@urban - Highly efficient facade and roof greening in combination with PV; optimal solution for energy efficiency in overall environmental consideration
In this project, different building-greening systems and plant/substrate types, combined with various PV modules, had been examined on a Viennese school. The influence on the hygrothermal behaviour of the building, energy-saving potential, humidity, shading, noise reduction, water retention and heat island effect are being scientifically explained. The students of the school will also be involved.
Establishment of a "Sustainability Label for repair-friendly constructed electr(on)ic household appliances (brown and white goods) as a shopping guideline for consumers"
The scope of the project comprises the development of criteria for a Sustainability Label for repair-friendly constructed appliances, marketing and PR activities with a focus on producers and consumers, training of auditors and labelling of at least one product.
Green Biorefinery - Phase 3: Development of technologies for intensification of process concerning extraction and utilisation of lactic acid, amino acids and gras fibres
Optimisation of downstream processing of a Green Biorefinery for separating lactic acid and amino acids out of silage juice applying chromatography; fundamental test for utilising the fibre fraction for hydro-greening and for horticulture substrate.
(energy central 400+) Marketable energy central from 400 kW with innovative, simple electricity conversion for residential building, public utility and commercial objects
Development of a marketable, decentralised "energy central" on a scale from 400 kW for the generation of electricity, heating (and cooling) for residential building, public utility and commercial objects, with a broad variety of applicable fuels on the base of regionally available biogenous residual materials.
Comparative analysis and evaluation of innovative building concept models in terms of key ecological and economic figures during life cycle of individual building concepts
The aim of this research project was to subject a number of building concept models to a comprehensive comparative analysis and evaluation in terms of key ecological and economic figures.
Spatial models as a basis of decision making for the utilisation of regionally available energy potentials for a CO2 neutral satisfaction of the local heat demand
Analytical GIS-methods to model regionally available renewable energy potentials for the evaluation of measures to achieve a CO2-neutral heating and cooling supply.
FABRIKregio - Development, test and spreading of models for the self-evaluation of sustainability at enterprise level under special consideration of regional successful factors
The project provides enterprises with a new self-evaluation model, which serves the purpose to support sustainable decisions. Focal point and innovation are: more active participation of the employees and better consideration of regional economic factors for success.
Factors which hinder and support the market introduction of innovative residential building concepts - an information offensive for planners and technology producers.
In order to actively increase the diffusion of innovative residential buildings, the results of currently available research were summarised to produce a "'diffusion campaign", directed at building planners, residential building contractors and selected technology producers.