Suchergebnisse für "Factsheet%3A Energietechnologien gestalten%2C die f%C3%BCr alle sinnvoll und nutzbar sind"

Build to satisfy: Modeling of user behavior in lowest and plus energy buildings: Consequences for building and comfort

Aim of the project was a better understanding and modeling of effects of user behavior on energy performance in office and service buildings, built with lowest energy building and plus-energy building techniques. The results support facility managers of office/service buildings and integrate gender and diversity issues.

First energy autonomous revitalization of an urban former industry quarter with the standard type of "Passive House" to reduce primary energy max. 100 kWh/m2 NFL

A renovation with the energy efficient factor 10+ of a former industry quarter in the standard type of passive house with usage of the most modern technologies and locally renewable energy resources.

"gugler! build & print triple zero" - subproject 9: Monitoring Gugler - Monitoring, evaluation, optimization GUGLER

The project objective is the measurement of relevant building values (energy consumption, ...), the evaluation of these values compared with the intended objectives and the optimization of the system based on the measured data. As a special innovation, monitoring the storage of alternatively generated electricity using photovoltaic and wind energy in the form of compressed air must be considered.

Development of affordable building equipment and services for future "Energy Plus houses" (Plus-Hybrid)

"Plus-Hybrid" integrates knowledge and experience from current activities and complement them by adopting a holistic approach, considering the intelligent interconnection of components as well as managing the planned efforts and human resources in time. The goal of this project was to develop affordable building equipment and services for future "Energy Plus houses".

Results of the latest research about thermal use of solar energy in multi-storey housing, prepared for builders and planners

The relevant Know-How in the fields of "sustainable building and energy supply" will be gathered. The information will be transferred to the relevant target groups (building promoters, architects, planners, customers). This will be done during workshops, planning assistance and a catalogue of quality criteria. The focus lies on solar thermal systems for multiple-family houses.

Resource-saving and sustainable production of high-quality steel by enhanced on-line control of stirring efficiency in vacuum degassing (SUSPRISE Joint Call)

For vacuum degassing of liquid steel, as it is used for production of high quality steel grades, an improved on-line monitoring and control system will be developed and applied. Thus the reliability of the vacuum degassing process will be improved, and simultaneously the consumption of energy and resources will be reduced.

Cool Windows - Windows with shading optimising the trade-off between summery overheating, wintery heat protection and adequate illumination

Windows with their associated components such as sun and glare protection are optimised as a holistic building equipment unit regarding different seasonal requirements in light of the climate crisis. The results serve as a basis for new developments in the window and shading technology in order to provide summery and wintery heat protection as well as adequate natural illumination over the year.

Sol4City - Integrated solar supply concepts for climate-neutral buildings for the "city of the future"

Intelligent technology coupling to achieve high solar coverage of the buildings (multi-storey residential building) heat and electricity demand. At the end of the project, integrated energy supply concepts for multi-storey residential buildings based on high network interaction and flexibility potential, maximum surface efficiency of conversion technologies on site and high economic competitiveness are available for the broad applicability in the "City of the Future".

HotCity - Gamification as a possibility to generate data for energy-oriented neighbourhood planning

The aim of the project was a functional test to determine whether an up-to-date data set of energy-oriented data can be collected for neighbourhood planning through gamification, cost-efficiently, quickly and reliably. This had been determined using the example of the potential determination of industrial and commercial waste heat sources in Vienna and Graz.

Probing for PV façade systems made of lightweight plastic modules with reversible fittings for new and old buildings (PV-FAS_light + easy)

Probing for a new, simple, cost-effective and building-integrated PV facade system made of plastic PV modules through initial investigations for fixing technology, for building physics, for fire protection and for electrical engineering concerning the usability, the areas of applicability and the yield and application potentialfor new buildings and for existing buildings.

Hemp Ski, Recyclable ski manufacturing from hemp, bio-resin and waste streams

In industrial production for alpine skis, epoxy resins of fossil origin and pre-impregnated glass fiber reinforcements are processed today. Innovations that replace environmentally critical materials in skis with biogenic substitute materials with an improved environmental balance have so far been limited to the production of small series. This circumstance motivated the consortium to develop a solution for a circular bioeconomy with the HempSki project, which will also make industrial ski production from renewable raw materials and waste streams possible in the future.

PlusIQ - Agricultural Photovoltaics: Integration as a Path to Plus-Energy-Quarters

This project examines opportunities, potentials and requirements of/for Agrophotovoltaic systems. Thereby, an interdisciplinary study will be conducted that integrates the major aspects of such systems holistically and from an integrative perspective. The complex interdependencies between the different aspects will be explored and described via a case study. Potential approaches toward realization will be studied and subjected to a comprehensive SWOT-analysis.

Eco.District.Heat - Potentials and restrictions of grid-bound heating systems of urban areas

Aim of the project Eco.District.Heat is to provide strategic decision-making support that enables Austrian towns and cities to deal with aspects of grid-bound heating (and cooling) systems in accordance with integrated spatial and energy planning from a holistic perspective when elaborating urban energy concepts.

EnErGy Plant Weiz - Renewable energy community Business Park Energy Lane and Factory Lane Weiz

Based on the results of the exploratory study project REC-Businesspark, a demonstrator for a "renewable energy community business park" is to be developed in Weiz. The focus is on the development of innovative operating and tariff models for a redox flow storage system that is integrated into a renewable energy community.

PESI - Paradigm shift in urban energy systems through synergies with industry

Analysis of different options for the use of industrial surplus energies of various shapes (waste heat, waste water, waste) and renewable energy sources in the industrial sector (e.g. solar panels on roof surfaces) in adjacent urban areas, which act as an "energy sponge". Based on real consumption and availability data, a simulation model was created and opportunities for synergies were documented.

FiTNeS - Facade integrated modular Split-heat pump for new buildings and refurbishment

The goal of FitNeS was the development of modular split heat pumps with compact and silent façade-integrated outdoor units for heating and domestic hot water preparation (and optionally cooling in combination with PV). The outstanding features of the concept are a modular design with a high degree of prefabrication and representing a visually and architectonically attractive, economic and sustainable solution for both new constructions and renovations. One of the main development goals is the minimization of sound emissions by means of optimized flow control.

What is so beautiful about the own home - a life-style concept of housing

Motives behind the wish of living in a certain way - here, especially in a detached house - explained through a life-style concept

New potentials using hardwood with small diameters in forestry and timber industry

Identification of potentials to use hardwood with small diameters (SDH) in Austria with the help of the value added chain from the forest's location to the processor. Analysis and evaluation of availability, quality and market potential.

Existing building reconstruction and implementation of passive house components

Implementation of passive house components, systems and techniques into the practice of existing building reconstruction, in order to reduce the energy consumption as much as possible and to increase the living quality substantially. Craftspeople and planners, who are specialized in building renovation, should gain access to passive house know-how.

Urban consolidation Lehen - Subproject 1: Fundamental study for an intelligent e-monitoring

The goal was to refine the energy monitoring for residential buildings as well as to find possibilities to visualise the energy consumption and continuously compare it with the "target consumption" in order to get a signal in time and thereby to be able to communicate it to the users. Different monitoring systems were investigated and the experience was evaluated.