Suchergebnisse
Decarbonization of Cities and Communities (Cities TCP)
The Cities TCP is a joint international effort that aims to accelerate the decarbonization in cities by providing a communication platform for relevant expertise of all IEA bodies to the local scale including cities, financing institutions, utilities, service providers and building constructors. Vice-versa, the platform generates evidence-based research questions of cities needs for IEA TCPs.
IEA AFC Annex 31: Polymer electrolyte membrane fuel cell (Working period 2017 - 2019)
Task 31 is a research and development oriented Task with the objective to contribute to the identification and development of techniques and materials to reduce the cost and improve the durability of polymer electrolyte fuel cells (PEFCs).
IEA AFC Annex 31: Polymer Electrolyte Fuel Cells (Working period 2020 - 2024)
AFC Annex 31 covers the technological development of the key components of fuel cells, system development, market introduction support through the analysis and development of the political framework conditions and the reduction of market entry barriers.
IEA AFC Annex 34: Fuel Cells for Transportation (Working period 2022 - 2025)
The vision of the Technology Collaboration Programme on Advanced Fuel Cells (AFC TCP) is to make a significant contribution to addressing the opportunities and barriers to the commercialisation of fuel cells by promoting the development of fuel cell technologies and their applications at the international level. In detail, Annex 34 deals with the advantages and disadvantages of fuel cells, the further development of storage media, the recording of cost reduction potentials and the results analysis of pilot projects for mobile applications.
IEA AFC Annex 35: Fuel cells for portable applications (Working period 2017 - 2019)
The aim of Annex 35 is the information exchange on the status and new developments of portable fuel cell systems and comprises the development and manufacture of membrane electrode assemblies (MEAs) all the way through to system components such as electronic converters or gas supply units. In addition the setup and configuration of hybridized systems and the key topics of secure operation, codes and standards are of interest.
IEA AFC Annex 33: Stationary Applications (Working period 2017 - 2019)
The main objective of Annex 33 is to support the technology development of key components and systems. Market implementation and transformation will be supported by the analysis and development of the necessary political framework and instruments. The current technological, economic and political barriers are to be identified, solutions developed and the barriers gradually removed.
IEA AFC Annex 35: Fuel cells for portable applications (Working period 2020 - 2023)
The aim of Annex 35 is the information exchange on the status and new developments of portable fuel cell systems and comprises the development and manufacture of membrane electrode assemblies (MEAs) all the way through to system components such as electronic converters or gas supply units. In addition, the setup and configuration of hybridized systems and the key topics of secure operation, codes and standards are of interest.
IEA AFC Annex 34: Fuel Cells for Transportation (Working period 2019 - 2022)
The overall objective of the project is the advancement of fuel cells in transportation applications. To ensure a comprehensive penetration of the automotive market, the focus will be laid on the cost-reduction potential of fuel cell components and systems including hydrogen storage, the hydrogen infrastructure and fuel cell vehicles in public transportation as well as fuel cell powered utility vehicles.
IEA TCP AFC Annex 33: Stationary Fuel Cells (Working period 2024 - 2027)
The focus of this task is on the secure supply of electricity for service and industrial applications. Analyses of at least three real applications (e.g. applications in healthcare facilities, data centers) show the strengths and weaknesses of stationary fuel cells compared to batteries and diesel generators. Global technological developments are considered in the analyses and target group-specific communication is used to promote the exchange with stakeholders.
IEA AFC Task 30: Electrolysis (Working period 2024 - 2027)
IEA AFC Task 30 deals with the production of hydrogen through electrolysis. Questions regarding material costs and durability, efficiency and reliability are at the core of research efforts. This is addressed through the development of new materials and advanced monitoring strategies to detect aging phenomena, as well as the optimisation of operating strategies. Within Task 30, developments shared among the world's leading research institutions and companies.
IEA AFC: Technology Collaboration Programme on Advanced Fuel Cells
In the AFC TCP, both technology-oriented R&D activities (polymer electrolyte membrane fuel cells, solid oxide fuel cells, electrolysers) as well as analysis to implement fuel cells in commercial applications (stationary and mobile applications) are carried-out. System investigations and modelling complement the activities of this TCP.
IEA AFC Annex 31: Polymer Electrolyte Fuel Cells
Task 31 was a research and development oriented Task with the objective to contribute to the identification and development of techniques and materials to reduce the cost and improve the durability of polymer electrolyte fuel cells (PEFCs).
IEA AFC Annex 33: Stationary Applications (Working period 2019 - 2022)
The future energy system will be strongly characterized by decentralized and renewable power generation. The use of fuel cells (FCs) can contribute to energy and environmental policy objectives. This project investigated whether a market transition from successful international demonstration plants to commercial plants is possible. The potential applications of fuel cells in the building sector and across energy communities and climate-neutral neighbourhoods were investigated.
IEA TCP AFC Annex 33: Fuel Cells for Stationary Applications (Working period 2022 - 2024)
The development of the energy system is characterized in particular by increasing decentralized power generation from renewable energy sources. Hydrogen is a key energy source for the decarbonization of buildings, mobility and industry. In 2022, Austria took on a sub-task in the IEA AFC TCP, which is investigating the use of stationary fuel cells in climate-neutral neighbourhoods. The project analyses its success factors and limitations and tests modelling tools.
IEA AFC Annex 35: Fuel cells für portable applications (Working period 2014 - 2017)
The aim of Annex 35 of Technology Collaboration Programm on Advanced Fuel Cells of the International Energy Agency (IEA) included information exchange on the status and new developments of portable fuel cell systems such as the direct ethanol fuel cell (DEFC) and the direct borohydride fuel cell (DBFC) and comprised the development and manufacture of membrane electrode assemblies (MEAs) all the way through to system components such as electronic converters or gas supply units.
IEA EBC Annex 55: Reliability of Energy Efficient Building Retrofitting - Probability Assessment of Performance & Cost (RAP-RETRO)
The scope of the project is to develop and provide decision support data and tools for energy retrofitting measures. The tools will be based on probabilistic methodologies for prediction of energy use, life cycle cost and functional performance. The impact of uncertainty on the performance and costs will be considered. Methods based on probability give powerful tools that can provide us with reliable ranges for the outcome.
IEA EBC Annex 64: Optimised Performance of Energy Supply Systems with Exergy Principles (Working period 2014-2018)
To reduce CO2 emissions in cities, an overall understanding of energy conversion processes is necessary, which also takes temperature levels into account. This is particularly important when alternative heat sources such as waste heat, ambient heat, solar and geothermal energy are to be used, as these often have a low temperature level, i.e. a low exergy content. Accordingly, urban energy systems are analysed and optimised within the framework of the IEA EBC Annex 64 with the help of the exergy approach.
IEA EBC Annex 62: Ventilative Cooling
The main goal of the Annex 62 is to make ventilative cooling an attractive and energy efficient cooling solution to avoid overheating in buildings. Ventilation is already present in buildings through mechanical and/or natural systems and it can remove excess heat gains as well as increase air velocities to widen the thermal comfort range. The results from the Annex facilitate better possibilities for both design purposes and for energy performance calculation.
IEA EBC Annex 60: New generation computational tools for building and community energy systems based on the Modelica and Functional Mockup Interface standards
The objective was to develop and demonstrate next-generation computational tools that allow building and community energy grids to be designed and operated as integrated systems. The work conducted in Annex 60 has helped to share, further develop and deploy free open-source contributions of previously uncoordinated activities in modeling and simulation, based on the Modelica and Functional Mockup Interface standards.
IEA EBC Annex 63: Implementation of Energy Strategies in Communities
As part of the "Annex 63" project, Austria has worked with 10 other countries to develop guidelines for the successful implementation of energy strategies at local level. The results include support for nine strategic measures, descriptions of case studies, support materials and recommendations for different target groups.