Suchergebnisse für "Factsheet: Energietechnologien gestalten, die für alle sinnvoll und nutzbar sind"
Wood Plastic Composites - Neue Wertschöpfung aus Holzspänen
Systematische Untersuchung einer neuen Werkstofffamilie, welche aus Abfallstoffen der Holzindustrie, nämlich den Holzspänen, in Verbindung mit geringen Mengen an thermoplastischen Polymeren (Polyolefine, 5-40%) hergestellt werden. Sie haben holzähnlichen Charakter, können aber mit Fertigungstechnologien der Kunststoffindustrie verarbeitet werden.
Recommendations for a consolidated Austrian research in the topic of "Smart Cities"
Based on a clear definition of the topics and focusing on energy relevant aspects the project will provide an overview on the present points of focus in research on "Smart Cities". Furthermore, future research topics will be defined and evaluated, and action plans for political stakeholders will be elaborated in the framework of two expert workshops.
Instationarity as a limiting factor for the use of industrial waste heat in heating-networks
Industrial waste heat is predominantly instationary. Thus utilisation of industrial waste heat in district heating systems is constrained. A database and an evaluation methodology were developed to support increased utilisation of this heat source.
Application of the Stirling cycle for environmentally compatible cooling - systems analysis
Conventional cooling has adverse effects on environment (eg. ozone depletion, global warming). One option for environmentally compatible cooling systems for near ambient temperatures (-10 to -50°C) is the Stirling cooler with environmental friendly process.
Development and optimization of a parabolic trough solar collector for generation of process heat for industrial processes
Development and optimization of a parabolic trough solar collector for generation of process heat for industrial processes. The operating performance and optimization possibilities of a prototype were evaluated and an improved prototype was tested with respect to its efficiency characteristics as well as in a small-scale application with a realistic load profile.
Raise in efficiency due to optimized waste heat management in heat intensive processes of the metal-working industry
This project drives at optimizing the energy input at the manufacturing process of oil tempered spring steel. This aim is met by investigating different options of waste heat recovery from industrial furnaces and heat insulation of heat treatment bathes. Besides, options of lead removal from anthracite will be listed.
IEA IETS Task 17: Membrane processes in biorefineries (Working period 2023 - 2025)
Biorefineries are essential for the transition from petroleum- to a biobased industry. The use of biomass as raw material for recyclable materials, chemicals and energy sources is essential and requires efficient and sustainable production processes. This project aims to strengthen national and international know-how transfer between research and development for membrane-based processes in biorefineries. The focus is on application, improvement and innovation in all aspects of membrane distillation.
Passivhauskindergarten Ziersdorf Phase Errichtung
Errichtung eines Kindergartens in Passivhaus-Technik unter Verwendung von lokal verfügbaren Baustoffen mit der Vorgabe eines streng limitierten Kostenrahmens
Einsatz von thermischen Kühltechnologien zur Nutzung der sommerlichen Bio-Nahwärme: Fallbeispiel Gemeinde Mureck
Optimierte Nutzung der Wärme aus einem Biogas-BHKW in der Gemeinde Mureck durch verbraucherseitige Maßnahmen; das MULTIfunktionale Energiezentrum MUreck auf dem Weg zur thermischen KLImatisierung: Multi-Mukli
Personal Power Plant
The application of PEM fuel cells is limited to certain singular products. The reason for this are the relatively high prices for the components of a PEM fuel cell. It is the aim of this project to fabricate the components of a PEM fuel cell by using mass production technologies such as injection moulding. In sequence this will lead to wide-spread applications of PEM fuel cells (personal-power-plant).
Development of miniaturized, ceramic high-temperature fuel-cell-components using resources-perserving mass-production processes
The application of nano scaled powder and powder injection moulding (PIM) for energy efficient co-sintering of miniaturized solid oxid fuel cells which can produce current and heat by using renewable raw materials.
Wood Plastic Composites - Direktextrusion
Entwicklung einer Holzspänedirektdosierung
IEA-IETS Annex 15: Industrial Excess Heat Recover (Phase 2)
In the framework of IEA IETS Annex 15 potentials of excess heat and technologies for their integration were collected from national research projects, bundled and elaborated on. This way, a broad knowledge base was built on experience gained in carrying out surveys for potential use of excess heat. Experiences with questionnaires, process integration tools and extrapolation of data using existing knowledge about the respective energy systems were exchanged. A process database with detailed process information could also be established, which can be used for further research activities. Also, in the area of policy instruments, recommendations for future measures to increase the use of surplus heat were derived on the basis of national contributions.
Das nachhaltige Krankenhaus. Eine wirtschaftsbezogene Grundlagenforschung zur praktischen Erprobung in einem Pilotkrankenhaus.
Aufbauend auf einer Machbarkeitstudie unterstützt ein interdisziplinäres Wissenschaftsteam AkteurInnen aus der Krankenhauspraxis bei der Erprobung der Umsetzung nachhaltiger Entwicklung in einem Pilotspital. Veränderungen in drei Kernbereichen sollen zu bedeutenden Entlastungseffekten führen.
Increasing of the resources-efficiency by experimental optimisation of steam production and by reduction of production residues in a metal-processing factory
The project is based on the results of the currently running project "Use of waste heat and renewable energy sources in a metal-processing factory". In this project it was found, that nearly the half of the consumption of natural gas is needed for steam production. Based on calculations already carried out, it is planned to investigate experimentally the possibilities of increasing the resource-efficiency by lowering the steam temperature and by replacing steam by hot water. Further increasing of resource-efficiency shall be achieved by use of internal residues as an additional fuel in a solid fuel furnace.
Stoffliche Verwertung der textilen Restfraktion
Verwertung des im Zuge der Aussortierung von brauchbarer Second-hand Bekleidung aus gesammelter Altkleidung anfallende textile Abfall soll einer Wiederverwendung zugeführt werden; Entwicklung von automatisierten, mechanischen Verfahren zu Aufbereitung; Vermeidung von Abfall.
Holzgasbetriebene Mikrogasturbine
Transfer of results of the program "Factory of Tomorrow" into the target groups of energy managers and energy consultants
Transfer of results of the program "Factory of Tomorrow" with respect to energy efficiency and increased adoption of renewable energy technologies into the target groups of internal energy managers and external energy consultants. The transfer activities include carrying out a one-day-seminar twice and the preparation of freely available training materials.
New solvents and processes for post-combustion CO2 capture
New and better solvents for CO2 absorption can reduce the costs of Carbon Capture and Storage significantly. Therefore, the ability to absorb CO2 and the vapour - liquid equilibrium curve of different new solvents will be determined in the laboratory and under real operating conditions at a power plant. Furthermore, the achievable CO2 removal efficiency of spray towers will also be investigated for different solvents.
Sustainable energy supply: Production and import of biomass and bio fuels
The project gives an overview of the supply and demand for biofuels specifically dealing with the situation in Europe and that in threshold and developing countries using case studies as examples. Cases: Sweden and France as importing countries in the EU, and Senegal as a (potential) exporting nation.