Suchergebnisse für "Factsheet: Energietechnologien gestalten, die für alle sinnvoll und nutzbar sind"
Hydrogen from renewables in Austria - an energy carrier of the future?
Renewable hydrogen in Austria: Future perspectives for the production and use of hydrogen from renewable energy in Austria with the identification of projects to demonstrate the role of renewable hydrogen in an efficient and flexible energy system.
EGRD Workshop-Berichte
Der Bericht des Workshop "Space Cooling" vom Mai 2016 wurde veröffentlicht.
NaNu3 - Parametric Planning for a Sustainable Roof (Blue, Grey and Green)
Demonstration of the feasibility and validation of a parametric model that can evaluate the practical and financial feasibility of the combined use of roof areas as well as its microclimate and environmental effectiveness at an early planning stage.
Green Biorefinery - Primary Processing and Utilization of Fibres from Green Biomass
Tests on optimisation of the essential process unit mechanical fractionation of the primary raw material "green biomass" into a liquid and a solid - fibres containing - fraction. Furthermore, lab and pilot scale tests with respect to technologies and processes for primary processing of the solid fraction (e.g. technologies for obtaining specified well defined fibre fractions, reduction of odour etc.). Finally, lab and pilot scale tests regarding manufacturing of prototype fibre products (fibreboards and adhesives & fillers for the construction sector) based on specific well defined fibre fractions from green biomass as primary raw material.
Reporting about Sustainability: In 7 Schritten zum Nachhaltigkeitsbericht
Ein allgemeiner Leitfaden zur Nachhaltikeitsberichterstattung
Österreichisches Institut für Nachhaltige Entwicklung
Herausgeber: BMVIT - Bundesministerium für Verkehr, Innovation und Technologie
Deutsch, 56 Seiten
Downloads zur Publikation
Formulation of directives for the environmentally conscious choice of upgraded insulation and surface coatings for walls and floors, the basis for the awarding of the international eco-label natureplus
Aktuelle Publikationen des IEA-SHC Tasks 49
Aktuelle Publikationen zum Thema "Solare Prozesswärme" jetzt online verfügbar.
BIM2BEM Flow - Continuous BIM-based energy efficient planning
Automated integration and assignment of exchange requirements between the design and simulation programs, based on the elaborated exchange information requirements, should enable continuous energy efficiency planning along the design phase.
Highlights of Bioenergy Research 2020
January 24th, 2020
Messe Congress Graz, Messeplatz 1, 8010 Graz
National and international results from the IEA Bioenergy Tasks and the ERA-NET Bioenergy
Integral Resource Optimization Network Study
A robust, distributed control network for optimizing the resource "electrical energy". Consumers, producers and storages network in a self-organized way and coordinate autonomously their usage of electrical energy. Load-shaping, transparent flow of information, system-wide increase in efficiency.
Energy centre for the thermal conversion of biogenous raw materials and residues of a region to produce heat, electricity, SNG and liquid biofuels II
Production of synthesis gas from biological fuels and residues using steam blown gasification. This synthesis gas will be used for polygeneration especially for heat, power, gaseous and/or liquid fuels.
Further enhancement of biogas production in Vorarlberg and its use over the natural gas grid
Further enhancement of biogas production in Vorarlberg with the possible use over the natural gas grid; analysis of the potential availability of fermentation substrates; scenarios for the increase of production capacities in combination with existing plants; technical blueprint of realistic scenarios; economic feasibility of the described scenarios.
IEA EBC Annex 63 publiziert drei neue Berichte
Im IEA EBC Annex 63 "Umsetzung von Energiestrategien in Gemeinden" wurden 2017 drei Berichte publiziert.
IEA Bioenergy
Österreichische Beteiligung an den Forschungsaktivitäten der internationalen Energieagentur
Forschungsforum
4/2000
Herausgeber: BMVIT
Deutsch, 6 Seiten
Downloads zur Publikation
New European Bauhaus: Jour Fixe Austria
9. July 2024
Architekturzentrum Wien (AzW), Museumsplatz 1, 1070 Vienna
The event focussed on the exchange of national and international NEB activities and positions as well as networking among the participants.
Upgrading of biogas for the gas distribution system of Salzburg
Development of a cost-effective cleaning unit, free of waste-products, for the upgrading of biogas to natural gas quality. Elaboration of the basis for a demonstration project injecting biogas into the gas distribution system of Salzburg.
PHplusCAD, IT-based efficient Passive house- and Plusenergy house-Planning
Elaboration and programming of a software that reduces effort and time consumption of Passive house and Plusenergy house planning. By developing direct interfaces between CAD-applications and PHplusCAD and interfaces between PHplusCAD and Passivhouse planning tools based on MS Excel the system could be improved and the related working processes alleviated.
GLASGrün - Regulation of climate, energy demand and comfort in GLASS buildings through structurally integrated vertical GREEN
Development of vertical vegetation systems for summergreen shading of glass facades of food retail and commercial areas. GLASGrün generates quantitative data on energy and microclimate balance and qualitative data on user perception. The results are guidelines for scalable and transferable constructive solutions with maintenance and management plans.
6D BIM-Terminal: Missing Link for the development of CO2 neutral buildings
The present project aims to close the gap between specialist consultants and Building Information Modeling (BIM) applications. For that, relevant data for cost estimation, scheduling construction planning and management or sustainable building operation and facility management, shall be added automatically to BIM elements and imported into the respective specialist planning software. This data exchange shall be carried out using IFC interface according to ÖNORM A6241-2 and the properties of the ASI properties server via a central platform, the "6D BIM-Terminal".