Suchergebnisse
Sol4City - Integrierte solare Versorgungskonzepte für klimaneutrale Gebäude der "Stadt der Zukunft"
Intelligente Technologiekoppelung zur Erreichung hoher solarer Deckungsgrade des Wärme- und Strombedarfs von Geschosswohnbauten. Am Projektende liegen für die breite Anwendbarkeit in der "Stadt der Zukunft" ganzheitliche Energieversorgungskonzepte basierend auf hohem Netzinteraktions- und Flexibilisierungspotenzial, maximaler Flächeneffizienz der Umwandlungstechnologien vor Ort sowie hoher ökonomischer Konkurrenzfähigkeit vor.
Sol4City - Integrated solar supply concepts for climate-neutral buildings for the "city of the future"
Intelligent technology coupling to achieve high solar coverage of the buildings (multi-storey residential building) heat and electricity demand. At the end of the project, integrated energy supply concepts for multi-storey residential buildings based on high network interaction and flexibility potential, maximum surface efficiency of conversion technologies on site and high economic competitiveness are available for the broad applicability in the "City of the Future".
VITALITY - Energieoptimierte Design-Regeln und Planungsschnittstellen für BIPV im urbanen Raum
Das Projekt VITALITY zielte darauf ab, unterstützende Instrumente, Designregeln und belastbare Informationen in der frühen Entscheidungs- und Entwurfsphase von Bauvorhaben zu liefern, um bauwerkintegrierte Photovoltaik (BIPV) einerseits in die Diskussion der Konzeptphase einzubringen und andererseits die Umsetzung stark vorzubereiten und zu unterstützen.
VITALITY - Energy optimised design rules and integral planning approach for building-integrated photovoltaics in urban areas
The VITALITY project aims to provide supporting tools, design rules and robust information in the early decision and design phase of building projects. By providing the right information at the right time, building-integrated photovoltaics (BIPV) is part of the discussion in the concept phase and the implementation is strongly prepared and supported.
OptiMAS - Optimization of building energy efficiency through model-based energy flow analysis with non-invasive sensors
Using a model-based energy flow analysis supported by non-invasive sensor technologies OptiMAS investigated how to monitor, analyze and optimize existing buildings independent of the installed HVAC systems and automation components. With the OptiMAS approach the optimization potential of individual buildings up to entire areas can be detected, located and tapped by adjustment of system parameters to ensure highest energy and resource efficiency.
FEELings - User Feedback for Energy Efficiency in Buildings
Der Energieverbrauch von Gebäuden wird maßgeblich durch das Verhalten von NutzerInnen beeinflusst. In diesem Forschungsprojekt wird ein neuartiges User-Feedbacksystem untersucht. NutzerInnen geben Feedback zur empfundenen Raumqualität. Auf Basis des Feedbacks werden Einstellungen an der Gebäudetechnik zur Energieeffizienz- und Komfortsteigerung optimiert. Der Proof-of-Concept für dieses neuartige System wird anhand von zwei Use-Cases erbracht.
FEELings - User Feedback for Energy Efficiency in Buildings
User behavior is a key factor for the energy consumption and the actual energetic performance of a building. A new type of user feedback system will be investigated in this research project. Users provide feedback on the sensed room quality. The data obtained by the feedback system are used to optimize settings of building services in order to improve the energy efficiency and the comfort in the building. A basic proof of concept of this system will be undertaken by means of two use cases.
BioModFiber - Modifizierung von biobasierten Kunststoffen für die Herstellung von Fasern für Textilanwendungen
Die generelle Zielsetzung des „BioModFiber“ Projekts ist die Entwicklung eines integralen Konzeptes zur Verwendung von PLA (Polylactid) für technische bzw. elastische Fasern. Dabei sollten die PLA basierten Fasern ein gutes Verhältnis zwischen Festigkeit und Dehnung aufweisen, genauso wie ein grundlegendes Rückstellverhalten. Dazu wird PLA mit innovativen Ansätzen modifiziert und damit die molekulare Struktur der Fasern beeinflusst.
metaTGA - Metadaten und Prozessmodelle für Open BIM in der TGA
Ziel dieses Projektes ist es, eine Methodik für die Entwicklung von Daten- und Prozessmodellen zu konzipieren und diese zur Modellierung ausgewählter TGA (Technische Gebäudeausrüstung)-Systeme exemplarisch anzuwenden. Dazu werden schwerpunktmäßig, jedoch nicht ausschließlich, die erneuerbaren Heizungstechnologien Wärmepumpe, Solarthermie und Biomasse sowie Lüftungssysteme betrachtet. Die entwickelten Daten- und Prozessmodelle werden im Rahmen von zwei Pilotprojekten evaluiert. Die Projektergebnisse werden in einem TGA-BIM-Leitfaden publiziert und in BIM-Arbeitsgruppen in relevanten Gremien eingebracht.
metaTGA - Metadata and process models for open BIM in building service engineering
The objective of this research project is to design a methodology for developing data and process models and to apply them by modelling selected MEP systems. A particular but not exclusive focus is put on the renewable heating technologies, e.g. heat pumps, solar heat and biomass as well as ventilation systems. The data and process models developed in this research project will be scientifically evaluated in two pilot projects. The models, the approaches taken during development and the project team’s experiences with the pilot application of the models will be disseminated openly.
AIA4ALL- Entwicklung von offenen, modularen und automatisierbaren Auftraggeber-Informations-Anforderungen (AIA) und BAPs
Die Auftraggeber-Informations-Anforderungen – die AIA – dient den Auftraggeber:innen (AG) dazu, Ziele und Anwendungsfälle für ein BIM-basiertes Bauprojekt zu definieren. Das Ziel dieses Projekts ist es daher, eine modulare, maschinenlesbare AIA zu erstellen und einen Prozess für die Überleitung in den BAP zu schaffen, die nahtlos in die Tool-Landschaft von openBIM-Projekten integriert werden können. Dies geschieht durch Entwicklung einer offenen Plattform zur Erstellung von Anwendungsfällen für die Auftraggeber-Informations-Anforderungen (AIA).
AIA4ALL - development of open, modular and automatable employer’s information requirements (EIR) and BIM execution plan (BEP)
The Employer's Information Requirements - EIR (German: AIA) - serves the client to define goals and use cases for a BIM-based construction project. The aim of this project is to create a modular, machine-readable AIA that can be seamlessly integrated into the tool landscape of openBIM projects. This is done by developing an open platform for creating use cases for the AIA.
PlasmaComp – Plasma-polymerized functional bio-based composite coatings
Entwicklung von biobasierten und mit nachhaltigen Additiven verstärkten, funktionellen Oberflächenbeschichtungen, die mittels Atmosphärendruckplasma polymerisiert und auf Papier und Naturfaser verstärkte Produkte aufgebracht werden können. Damit sollen technologische, mechanische und antimikrobielle Eigenschaften von Produkten im Verpackungs-, Konsumgüter- und Sportartikelsektor optimiert werden.
BioC4HiTech: Entwicklung von biobasierten Kohlenstoff-Halbzeugen zur Herstellung von MMCs, CMCs und CFCs
Im Rahmen des Forschungsprojektes sollen durch Carbonisierung von biobasierten Grünkörpern, die mittels Spritzguss, 3D-Granulatdruck und Pressen geformt werden, poröse Kohlenstoff-Halbzeuge hergestellt werden. Die porösen Formkörper sollen mit (Halb-)Metall-Schmelzen und kohlenstoffhaltigen Bindemitteln zu MMCs (Metal Matrix Composites), CMCs (Ceramic Matrix Composites) und CFCs (Carbon-Fiber reinforced Carbons) umgesetzt werden.
Earth movement: Clay - a climate- and resource-friendly building material
Manufacturing processes and transport of building materials are energy-intensive and cause high CO2emissions. In addition, many building materials pose a health and disposal problem due to their content of disruptive and harmful substances. Locally available clay can replace conventional materials if appropriately prepared and processed, and helps to save both manufacturing processes and transport routes.
OPENing Re-Use – Optimal planning decisions in the re-use sector
In an operational context, companies in the circular economy are faced daily with the question of whether a used product should be repaired, remanufactured, refurbished or recycled. The decision on what to do with used products is fraught with a great deal of uncertainty and must be made on a case-by-case basis - product-individually and depending on factors such as brand, condition, age, demand or recycling possibilities. As part of the "OPENing Re-Use" project, a business planning tool is being developed to support companies in their re-use planning, thereby increasing the efficiency of re-use processes and making re-use activities even more competitive with the purchase of new products.
CircularBioMat – Recyclable biogenic materials for building installations and supply equipment
As part of CircularBioMat, numerous bio‐based materials – including bio‐polymers reinforced with natural fibers as well as recycled materials – are being tested for their suitability as a replacement for the petroleum‐based polymers that dominate technical building installations (TGA) and supply equipment.
Reallabor INNERGY (Tirol): Transformation der Wärme- und Energieversorgung in Tirol
Das Ziel der Transformation der Wärme- und Energieversorgung soll durch das eingereichte Initialprojekt INNERGY beschleunigt werden. Es setzt sich aus einem Innovationslabor und einem darauf abgestimmten Leitprojekt zusammen.
Leitprojekt System-KW Murau: 100% erneuerbare bedarfsgerechte Energiebereitstellung
Aufbau eines integrierenden regionalen Energiesystems zur Sicherstellung des weiteren Ausbaus der erneuerbaren Energiequellen. Ziel ist eine verlässliche Lieferung von erneuerbarer Energie, die unabhängig von den fluktuierenden Erzeugungsleistungen für den Markt zur Verfügung gestellt werden kann.
INFINITE: INnovative FINanzierungsmodelle für nachhaltige urbane EnergIesysTEme
Ziel des INFINITE-Projekts ist es, in Stadtentwicklungsgebieten die gebäudeübergreifende Versorgung mit erneuerbaren Energieträgern durch lokale Versorgungseinheiten (lokale EVU’s) voranzutreiben und damit den Bedarf an fossilen Energieträgern, sowie überregionaler Energieversorgungsinfrastruktur zu reduzieren.