Suchergebnisse
IEA HPP Annex 28: Prüfmethoden und Berechnung der Jahresarbeitszahlen für Wärmepumpen
Entwicklung einer Handrechenmethode und Prüfprozedere zur Qualitätssicherung von Wärmepumpen für den kombinierten Heizungs- und Brauchwasserbetrieb - Annex 28 im IEA Heat Pump Program
Passivhauswohnen³: Facility Management for Residential Property Developers: A Key to Optimizing the Reduction of Energy and Operation Costs
What soon will be considered "standard" in ecological building must be carried out by the property developer and accepted by the future user. Therefore, in order to assist a smooth implementation of the new passive housing technique and begin the corresponding feedback mechanisms, a specific KMU "quality and incentive model" should be launched. The interrelationship of this model is designed with the property developer as well as the user in mind and aims for lasting "behavior modification" in energy and operational expense consumption.
Strategic optimisation of the regulation of air moisture through ventilation systems to reduce energy demand for humidifiers and dehumidifiers
For the validation of coupled room and building component simulations, an analytical solution of this unsteady problem was developed. Finally, a simplified method for determining the humidification and dehumidification demands considering a room's effective moisture capacity was developed.
Contracting Platform for SME´s
Evaluation of requirements and framework conditions for the implementation and the operation of a Contracting Platform for SME´s in Austria for the cost efficient identification and realisation of energy efficiency measures.
Energy Performance Contracting (IEA DSM Implementing Agreement - Task X)
The objective of this task within the IEA DSM programme is to facilitate the use of performance contracts and other energy service company (ESCO) contracts. In this scenario, the ESCO has taken on the project's performance risk by guaranteeing a specified level of energy savings. Its compensation for this risk is directly tied to achieving savings. The financing for such a project could come from the ESCO, the equipment supplier or a third-party company.
Sustainable energy supply for Austria
Rapidly increasing energy consumption and decreasing resources of fossil fuels lead to dramatical economical, ecological and social problems.This study identified the feasible long term potential of renewable energy sources. Then ways were developed how to supply the demand for future energy consumption with renewable energy sources, despite increasing energy services.
Indicators of social sustainability for energy regions of the future (SONAH)
Set of social sustainability indicators, oriented at practice needs, and concept for their use in energy strategy processes, regional energy concepts, planning and operation of plants generating renewable energy
Saving energy with "single-family house contracting"
Saving energy with "single-family house contracting": developing of standardized modules for energy saving measures, evaluation methods for proving the quality of the measures, model contracts and marketing-strategies.
Energy Services as an Integral Part of the Distribution
Concept development for the implementation of efficient energy services as part of grid connected energy supply to increase energy end-use efficiency.
Feasibility study of innovative absorption heat pump processes
A feasibility study of innovative absorption heat pump processes for strategic orientation and further development of heat pumping technology and its applications.
Smart Metering consumption
The project Smart Metering consumption focused on the energy consumption of the future smart metering infrastructure - an issue not widely discussed until now.
Use of thermal cooling technologies and optimal combination with other heat energy consumers to use during summer the available district heating based on renewable energy sources: example of the municipality of Mureck
Optimal use of heating energy from a biogas CHP in the municipality of Mureck through demand side measures; the multifunctional energy centre Mureck on the way towards thermal air-conditioning: Multi-Mukli
Production of bioethanol in addition with heat, power and valuable byproducts
The production of bioethanol in Bruck/Leitha in addition to the production of heat, power and valuable by-products from biomass will be optimized by a new process simulation tool under the target of maximum usage of waste and low temperature heat and optimal source and product usage.
Refrigerating plants in hotel and catering industry
To the frequent uses of refrigerating plants in hotel and catering industry was not paid a lot of attention in the way of energy efficiency so far. We are talking about plug-in cooling units and custom-made cooling equipment. Aim of the project: finding out the manner and amount of refrigeration usage, as well as the estimation of energy savings potential and measures, especially for custom-made cooling equipment.
Integration methods for solar heat into industrial production processes
The project aims at the development of integration methods for solar heat into industrial production process with batch operations as typical for SMEs
Development of agitation systems in biogas plants in order to optimize mixing-behaviour and to reduce energy demand with the help of Computational Fluid Dynamics (CFD) simulation
The purpose of this project is the investigation of the mixing-behaviour and performance of the agitation systems in biogas plants, and to present them through Computational Fluid Dynamics (CFD) simulation. This EDP-tool can model and predict the actual fluid dynamics in a closed system. Thus it may help to plan optimal reactor geometries, position and combination of agitation systems as well as to minimize the energy requirements.
SolProBat - Entwicklung einer Optimierungsmethode zur Integration von Solarthermie in Produktionsprozessen im Batch-Betrieb
(Weiter-)Entwicklung der Methode der Energie-Pinch-Berechnung zur optimierten Integration von Solarwärme in industriellen/gewerblichen Produktionsprozessen
Smart Metering consumption – Eigenverbrauch von Stromzählern
Am Markt bestehende Smart Metering Lösungen werden analysiert, deren hinsichtlich Eigenenergieverbrauch relevanten Merkmale identifiziert und in ein Mapping übergeführt. Nach der Entwicklung einer Methodik für in Folge durchzuführende Eigenverbrauchsmessungen werden darauf basierend Hochrechnungen durchgeführt, die richtungssichere Abschätzungen für Gesamtverbräuche in einer Region ermöglichen und sichtbar machen sollen.
Entwicklung von Rührwerksystemen mit optimalem Mischverhalten in Biogasanlagen und verringertem Energiebedarf mittels numerischer Strömungssimulation (AD-CFD)
Ziel dieses Projektes ist es, das Mischverhalten sowie die Performance von Rührsystemen in Biogasanlagen zu erfassen und mittels CFD-Simulation mathematisch darzustellen. Aus diesen Simulationen können das aktuelle Mischverhalten sowie Rückschlüsse auf optimale Reaktorgeometrien und Positionierung von Rührsystemen, optimale Rührwerkskombinationen und minimierter Energieeinsatz abgeleitet werden.
Feasibility Study innovative Absorptions-Wärmepump-Prozesse
Eine Studie zur technischen und gesamtwirtschaftlichen Machbarkeit von innovativen Absorptions-Wärmepumpen-Prozessen zur weiteren strategischen Ausrichtung und Entwicklung der Technologielinie "Wärmepumpen und kältetechnische Anwendungen".