Suchergebnisse
IEA-IETS Annex 15: Industrial Excess Heat Recover (Phase 2)
In the framework of IEA IETS Annex 15 potentials of excess heat and technologies for their integration were collected from national research projects, bundled and elaborated on. This way, a broad knowledge base was built on experience gained in carrying out surveys for potential use of excess heat. Experiences with questionnaires, process integration tools and extrapolation of data using existing knowledge about the respective energy systems were exchanged. A process database with detailed process information could also be established, which can be used for further research activities. Also, in the area of policy instruments, recommendations for future measures to increase the use of surplus heat were derived on the basis of national contributions.
ISGAN Annex 7: Smart Grid Transitions – on Institutional Change
The International Smart Grid Action Network (ISGAN) aims at fostering the global implementation of Smart Grids. Annex 7 – Smart Grid Transitions deals with the related challenges regarding institutional change and socio-technical transition of the electricity systems.
IEA 4E: Annex Electric Motor Systems. Working period 2021 - 2024
The goal of the Annex Electric Motor Systems is to raise awareness on the large savings potential in motor systems, while showing the realization method of such a path. After publishing the policy and audit guidelines for motor systems Austria leads the task „New Industrial Developments and Digitalization in Motor Systems“.
Enerstock Online 2023
14. - 15. February 2023
Online, DE
Enerstock Online will update you on emerging developments in energy storage, covering topics from the scientific community, new policy development, and inspiring energy storage projects.
IEA 4E: Annex Electric Motor Systems. Working period 2019 - 2021
The goal of the Annex Electric Motor Systems is to raise awareness on the large savings potential in motor systems, while showing the realization method of such a path. After publishing the policy and audit guidelines for motor systems Austria leads the task „New Industrial Developments and Digitalization in Motor Systems“.
IEA IETS Annex 15: Industrial Excess Heat Recover (Phase 3)
Within the framework of the IEA IETS Annex 15 (Phase 3), potentials for the use of waste heat as well as technologies for its integration are collected, bundled and processed through contributions from national research activities. The contributions of the Austrian consortium included technology development and integration concepts of heat pump and energy storage systems, risk analysis in the implementation of waste heat projects, and work on operation optimization and design of hybrid energy systems.
IEA DHC Annex XIII Project 07: CASCADE - A comprehensive toolbox for integrating low-temperature sub-networks in existing district heating networks
The majority of urban district heating networks operate at high temperatures, which are a barrier to the efficient integration of heat sources such as solar, geothermal, ambient or low temperature waste heat. CASCADE is investigating the integration of low-temperature networks into the return pipe of existing district heating networks, which will reduce return temperatures and thus improve efficiency and increase its capacity to connect new customers.
IEA DHC Annex XIV project 02 „FAST DHC - Feasibility Assessment Tool for District Heating and Cooling“
The transformation of district heating is referred to as the transition from the 1st to the 4th generation (4GDH). Recently, so-called ‘thermal source networks (TSN)’, also known as 5th generation or anergy networks, have been introduced. The aim of the project FAST DHC is to develop and demonstrate a simple tool for the techno-economic evaluation of 4GDH and thermal source networks, which also enables a comparison with individual heating and cooling solutions.
IEA DHC Annex XIV project 06: HY2HEAT Using electrolysis waste heat in district heating networks
Hydrogen will primarily be produced by electrolysis, however, approximately one third of the electricity used to generate the hydrogen will be wasted as heat. The aim of HY2HEAT is to analyse the techno-economic synergies of electrolysis waste heat integration in District Heating systems, to evaluate the best technical solutions and to derive a practical guide for District Heating operators.
IEA DHC Annex XIV project 04: RE-PEAK - How to cover peak heat loads in DH networks with renewables?
One challenge for the decarbonisation of many district heating networks (DH) is the provision of peak load. The objectives of the RE-PEAK project are: to gain a better understanding of the specific problems, to collect empirical data on the provision of peak load, to analyse the perception of district heating network operators with regard to the transition to climate-neutral peak load coverage, and to consolidate the results and derive recommendations.
IEA DHC Annex XIII Project 02: MEMPHIS 2.0 - Advanced algorithm for spatial identification, evaluation of temporal availability and economic assessment of waste heat sources and their local representation
The identification and integration of waste heat sources is a key measure towards the decarbonisation district heating networks (DHN). Aim of MEMPHIS 2 is to develop an improved algorithm for identification of different current and future waste heat sources; including time relations of the heat emitted and techno-economic details as well as the further development of the online waste heat explorer.
Working Party on End-Use Technologies (EUWP)
The International Energy Agency (IEA) Working Party on Energy End-Use Technologies, often referred to as End-Use Working Party (EUWP), has been in the advisory council for the Committee on Energy Research and Technology (CERT) in the area of end-use energy technologies since 1981. It also functions as reference for questions on end-use energy within the IEA Secretariat.
IEA EBC Annex 66: Newsletter No. 1 October 2014
Herausgeber: IEA EBC Annex 66
Englisch, 9 Seiten
Downloads zur Publikation
World Energy Storage Conference 2022
12. - 14. October 2022
Birmingham, GB
Energy storage is a key enabler for the decarbonisation of our energy systems to achieve a Net-Zero future. This joint event aims to provide an inclusive platform for all energy storage researchers and practitioners across academia, industry, government agencies and non-government organisations.
IEA UsersTCP: Social License to Automate (working period 2019-2021)
Automation applications for load shifting, also in the homes of end customers, will play an important role in the current transformation process of the energy system. The project “Social License to Automate” examined the question, which aspects are important for the success of these innovations and technologies, and under which circumstances end users are prepared to accept or reject energy-related automation processes.
IEA ECBCS Annex 49 Midterm Report (2010)
Low Exergy Systems for High-Performance Buildings and Communities
Englisch
IEA 4E Annex: Electric Motor Systems. Working period 2008 - 2011
Promotion of energy efficiency of poly-phase electric AC motors and motor systems in relevant applications as pumps, fans, compressors and mechanical drives that are generally used in industry, infrastructure and large buildings. This work also included new technologies such as frequency inverters (adjustable speed drive) and permanent magnet motors.
IEA-4E Annex Electric Motor Systems (EMSA). (Working period 2014-2017)
The goal of the Annex Electric Motor Systems is to raise awareness on the large savings potential in motor systems, while showing the realization method of such a path. Currently, Austria leads the task Energy Audits for Motor Systems to develop recommendations for carrying out energy audits for motor systems based on international standards.
IEA 4E TCP-PECTA: Power Electronic Conversion Technology (Working period 2021 - 2024)
The Power Electronic Conversion Technology Annex (PECTA) is one of 4 Annexes of the IEA 4E TCP. PECTA shall assess the efficiency benefit of the emerging WBG technology for different relevant power electronic applications and furthermore serves as an independent knowledge platform for policy makers and all kind of parties and stakeholders that are interested in WBG.
IEA 4E: Annex Electric Motor Systems. Working period 2017 - 2019
The goal of the Annex Electric Motor Systems is to raise awareness on the large savings potential in motor systems, while showing the realization method of such a path. After publishing the „Policy Guidelines for Electric Motor Systems“ and recommendations for carrying out energy audits for motor systems based on international standards Austria analysed the impact of industrial automation on electricity consumption and the motor market.