Suchergebnisse
IEA IETS Annex 15: Industrial Excess Heat Recover (Phase 3)
Within the framework of the IEA IETS Annex 15 (Phase 3), potentials for the use of waste heat as well as technologies for its integration are collected, bundled and processed through contributions from national research activities. The contributions of the Austrian consortium included technology development and integration concepts of heat pump and energy storage systems, risk analysis in the implementation of waste heat projects, and work on operation optimization and design of hybrid energy systems.
IEA 4E: Annex Electric Motor Systems. Working period 2021 - 2024
The goal of the Annex Electric Motor Systems is to raise awareness on the large savings potential in motor systems, while showing the realization method of such a path. After publishing the policy and audit guidelines for motor systems Austria leads the task „New Industrial Developments and Digitalization in Motor Systems“.
IEA 4E: Annex Electric Motor Systems. Working period 2019 - 2021
The goal of the Annex Electric Motor Systems is to raise awareness on the large savings potential in motor systems, while showing the realization method of such a path. After publishing the policy and audit guidelines for motor systems Austria leads the task „New Industrial Developments and Digitalization in Motor Systems“.
IEA-4E Annex Electric Motor Systems (EMSA). (Working period 2014-2017)
The goal of the Annex Electric Motor Systems is to raise awareness on the large savings potential in motor systems, while showing the realization method of such a path. Currently, Austria leads the task Energy Audits for Motor Systems to develop recommendations for carrying out energy audits for motor systems based on international standards.
IEA 4E: Annex Electric Motor Systems. Working period 2017 - 2019
The goal of the Annex Electric Motor Systems is to raise awareness on the large savings potential in motor systems, while showing the realization method of such a path. After publishing the „Policy Guidelines for Electric Motor Systems“ and recommendations for carrying out energy audits for motor systems based on international standards Austria analysed the impact of industrial automation on electricity consumption and the motor market.
IEA DHC Annex XIII Project 07: CASCADE - A comprehensive toolbox for integrating low-temperature sub-networks in existing district heating networks
The majority of urban district heating networks operate at high temperatures, which are a barrier to the efficient integration of heat sources such as solar, geothermal, ambient or low temperature waste heat. CASCADE is investigating the integration of low-temperature networks into the return pipe of existing district heating networks, which will reduce return temperatures and thus improve efficiency and increase its capacity to connect new customers.
IEA DHC Annex XIII Project 02: MEMPHIS 2.0 - Advanced algorithm for spatial identification, evaluation of temporal availability and economic assessment of waste heat sources and their local representation
The identification and integration of waste heat sources is a key measure towards the decarbonisation district heating networks (DHN). Aim of MEMPHIS 2 is to develop an improved algorithm for identification of different current and future waste heat sources; including time relations of the heat emitted and techno-economic details as well as the further development of the online waste heat explorer.
IEA EBC Annex 66: Newsletter No. 1 October 2014
Herausgeber: IEA EBC Annex 66
Englisch, 9 Seiten
Downloads zur Publikation
Working Party on End-Use Technologies (EUWP)
The International Energy Agency (IEA) Working Party on Energy End-Use Technologies, often referred to as End-Use Working Party (EUWP), has been in the advisory council for the Committee on Energy Research and Technology (CERT) in the area of end-use energy technologies since 1981. It also functions as reference for questions on end-use energy within the IEA Secretariat.
IEA EBC Annex 91: Open BIM for Energy Efficient Buildings
Building Information Modeling (BIM) is considered a key technology for optimising the overall energy performance of buildings. The project lays the foundations for OpenBIM tools to include the assessment and optimisation of the energy efficiency of buildings in the future, for Open BIM processes and data models to be increasingly harmonised and standardised, and thus for smaller construction companies to have the opportunity to work on complex BIM projects in the future.
IEA EBC Annex 89: Ways to Implement Net-zero Whole Life Carbon Buildings
IEA EBC Annex 89 focuses on the pathways and actions needed by various stakeholders and decision-makers to implement whole life cycle based net-zero greenhouse gas (GHG) emissions from buildings in policy and practice. Annex 89 will support key stakeholders and decision-makers in developing and implementing effective Paris-goal compatible schemes and solutions to achieve NetZ-WLC buildings at multiple scales.
IEA HPT Annex 63: Impact of heat pump placement on noise emissions
Noise emissions from heat pumps are a potential barrier for broad market diffusion of this energy efficiency technology, especially in urban areas. In this project, the influences of noise emissions in the building and in the neighbourhood are characterised, their psychoacoustic effects are analysed in more detail, and tools for digitally supporting heat pump placement are further developed. The results will be presented to relevant target groups in the form of guidelines and other documentation.
IEA HPT Annex 64: Safety measures for flammable refrigerants
New bans on chemicals and the revision of the so-called F-Gas Regulation pose new challenges for the heat pump and refrigeration industry. In this project, new knowledge regarding the safe future use of flammable refrigerants in heat pump and refrigeration systems up to 50 kW for room temperature control and hot water preparation is being developed and made available to the relevant target groups.
ISGAN Annex 7: Smart Grid Transitions – on Institutional Change
The International Smart Grid Action Network (ISGAN) aims at fostering the global implementation of Smart Grids. Annex 7 – Smart Grid Transitions deals with the related challenges regarding institutional change and socio-technical transition of the electricity systems.
IEA EBC Annex 73: Towards Net Zero Energy Resilient Public Communities
Public buildings such as hospitals and educational institutions often house critical infrastructure that depends on sufficient energy and resource supply. The aim of the annex was to develop tools for the planning process of resilient, efficient and low-emission energy systems for such building clusters.
IEA EBC Annex 70: Building Energy Epidemiology: Analysis of Real Building Energy Use at Scale
Within the framework of the IEA-EBC Annex 70, causes of deviations between calculated and actual energy consumption in buildings were empirically investigated and requirements for data quality, characteristics and security were developed. Furthermore, recommendations were developed regarding the use of internationally uniform standards and methods for data collection, processing and evaluation.
IEA HPT Task 42: Heat pumps in smart energy grids for sustainable cities
The aim of Annex 42 is to analyse the technical possibilities as well as the economic/regulatory framework conditions of heat pumps for load balancing in smart grids, which are largely controlled by electricity supplier, and to investigate the impact on thermal consumers and possible potentials, in order to work out economic incentive models for load shifting and the benefits for energy supply companies and end customers on this basis.
IEA EBC Annex 80: Resilient Cooling for Residential and Small Non-Residential Buildings
In the project cost and energy-efficient and non-fossil solutions for cooling and ensuring summer suitability are systematically analyzed and further developed. As part of the international R&D co-operation, fragmented knowledge is bundled and made available to the Austrian construction and mechanical engineering industry. Austrian expertise in climate-sensitive building optimization is disseminated internationally through leading participation in this international research.
IEA HPT Task 41: Cold Climate Heat Pumps
The aim was to increase the efficiency of outdoor air heat pumps in cold climates in locations with low outside temperatures of up to -25°C. Newly developed heat exchanger concepts were tested and optimized regarding their icing behaviour. Different circuit modifications were modelled and simulation studies for low ambient temperatures were carried out.
IEA EBC Annex 60: New generation computational tools for building and community energy systems based on the Modelica and Functional Mockup Interface standards
The objective was to develop and demonstrate next-generation computational tools that allow building and community energy grids to be designed and operated as integrated systems. The work conducted in Annex 60 has helped to share, further develop and deploy free open-source contributions of previously uncoordinated activities in modeling and simulation, based on the Modelica and Functional Mockup Interface standards.