Suchergebnisse
Multi-WP – High-efficiency multivalent heat pump concepts for the thermal use of external air with geothermal storage
Optimization of multi-WP systems consisting of air-source heat pumps and geothermal storage with regard to increasing flexibility and efficiency from 30 kW for individual buildings as well as neighbourhood solutions and addressing aspects such as PV utilization optimization, mode of operation, utilization conflicts and noise pollution from air-source heat pumps. The project will establish the use of the heat source external air in combination with seasonal storage as a particularly efficient alternative for heating, cooling and hot water supply.
OptiMAS - Optimization of building energy efficiency through model-based energy flow analysis with non-invasive sensors
Using a model-based energy flow analysis supported by non-invasive sensor technologies OptiMAS investigated how to monitor, analyze and optimize existing buildings independent of the installed HVAC systems and automation components. With the OptiMAS approach the optimization potential of individual buildings up to entire areas can be detected, located and tapped by adjustment of system parameters to ensure highest energy and resource efficiency.
FEELings - User Feedback for Energy Efficiency in Buildings
Der Energieverbrauch von Gebäuden wird maßgeblich durch das Verhalten von NutzerInnen beeinflusst. In diesem Forschungsprojekt wird ein neuartiges User-Feedbacksystem untersucht. NutzerInnen geben Feedback zur empfundenen Raumqualität. Auf Basis des Feedbacks werden Einstellungen an der Gebäudetechnik zur Energieeffizienz- und Komfortsteigerung optimiert. Der Proof-of-Concept für dieses neuartige System wird anhand von zwei Use-Cases erbracht.
FEELings - User Feedback for Energy Efficiency in Buildings
User behavior is a key factor for the energy consumption and the actual energetic performance of a building. A new type of user feedback system will be investigated in this research project. Users provide feedback on the sensed room quality. The data obtained by the feedback system are used to optimize settings of building services in order to improve the energy efficiency and the comfort in the building. A basic proof of concept of this system will be undertaken by means of two use cases.
metaTGA - Metadaten und Prozessmodelle für Open BIM in der TGA
Ziel dieses Projektes ist es, eine Methodik für die Entwicklung von Daten- und Prozessmodellen zu konzipieren und diese zur Modellierung ausgewählter TGA (Technische Gebäudeausrüstung)-Systeme exemplarisch anzuwenden. Dazu werden schwerpunktmäßig, jedoch nicht ausschließlich, die erneuerbaren Heizungstechnologien Wärmepumpe, Solarthermie und Biomasse sowie Lüftungssysteme betrachtet. Die entwickelten Daten- und Prozessmodelle werden im Rahmen von zwei Pilotprojekten evaluiert. Die Projektergebnisse werden in einem TGA-BIM-Leitfaden publiziert und in BIM-Arbeitsgruppen in relevanten Gremien eingebracht.
metaTGA - Metadata and process models for open BIM in building service engineering
The objective of this research project is to design a methodology for developing data and process models and to apply them by modelling selected MEP systems. A particular but not exclusive focus is put on the renewable heating technologies, e.g. heat pumps, solar heat and biomass as well as ventilation systems. The data and process models developed in this research project will be scientifically evaluated in two pilot projects. The models, the approaches taken during development and the project team’s experiences with the pilot application of the models will be disseminated openly.
OptiMAS - Optimierung der Gebäudeenergieeffizienz durch modellbasierte Energiestromanalyse mit non-invasiver Sensorik
OptiMAS untersuchte, wie durch eine modellbasierte Energiestromanalyse und unter Verwendung von Anlegesensorik bestehende Gebäude überwacht, analysiert und optimiert werden können, unabhängig von den darin verwendeten HLK-Systemen und deren Automationskomponenten. Mit dem OptiMAS Ansatz kann das Optimierungspotential von Einzelgebäuden bis hin zu ganzen Arealen und Stadtteilen erfasst, lokalisiert und durch Anpassung von Systemparametern höchstmögliche Energie- und Ressourceneffizienz sichergestellt werden.
ÖKO-OPT-AKTIV - Optimiertes Regelungs- und Betriebsverhalten thermisch aktivierter Gebäude zukünftiger Stadtquartiere
Entwicklung und Simulation skalierbarer, verteilter Regelstrategien zur Nutzung der Speicherwirkung thermisch aktivierter Bauteile in Gebäuden zukünftiger Stadtquartiere bei deren Energieversorgung durch eine Energiezentrale.
ÖKO-OPT-AKTIV - Optimised control and operating behaviour of thermally activated buildings in future urban districts
Development and simulation of scalable, distributed control strategies for the use of the storage effect of thermally activated components in buildings of future city districts for their energy supply by an energy centre.
ÖKO-OPT-QUART - Economically optimized control and operating mode of complex energy networks of future city districts
In the project ÖKO-OPT-QUART energy-based, economic and control-orientated models will be developed in order to simulate the operating mode of complex, sustainable energy networks in city districts. For an exemplary configuration these models will be combined to an overall model which allows a realistic economic comparison of different control strategies. The final goal of the project is the development of a method for the systematic design of cost-optimized, predictive control strategies for complex energy networks in city districts.
fit4power2heat - Sondierung zur Realisierung des Wärmepumpenpooling für städtische Wärmenetze
Die Integration von Wärmepumpen kann die Wirtschaftlichkeit bestehender Wärmenetze erhöhen und gleichzeitig den hohen Kosten für den Ausbau der Stromnetze entgegenwirken. Ziel des Projektes ist es, innovative Geschäftsmodelle für kleine und mittlere städtische Wärmenetze zu entwickeln, insbesondere hinsichtlich der Synergien zwischen Wärme- und Strommarkt. Hauptfokus ist die Anwendung eines Wärmepumpen-Poolings über mehrere Wärmenetze.
fit4power2heat
The integration of heat pumps can increase the cost effectiveness of existing heating networks and counter the high costs for the expansion of power grids at the same time. Aim of the project is to develop innovative business models for small and medium municipal heating networks with focus on synergies between heat and power market. Main focus is a heat pump pooling for several heat grids.
Energieschwamm: Das Gebäude als Energieschwamm - Strom rein - Wärme raus
Ziel war die Entwicklung und Demonstration in Praxistests von innovativen, dynamischen Regelungskonzepten in Kombination mit (Außenluft-) Wärmepumpen, welche durch Einzelraumregelung mit Überhöhungen bzw. Absenkungen von Raumtemperaturen zu einer bestmöglichen Wärmespeicherung von Strom (PV-Eigenverbrauch bzw. Netz-Überschussstrom) in der Gebäudemasse von Mehrfamilien-Gebäuden bei bestmöglichen aber auch variablen Komfortparametern führen. Wichtige Faktoren und Motivatoren für die Nutzerakzeptanz sollen ermittelt werden, als Basis für die Entwicklung von potentiell erfolgreichen Geschäftsmodellen.
GRÜNSTATTGRAU - Innovationen für die grüne Stadt "Das grüne Innovationslabor"
GRÜNSTATTGRAU ist die ganzheitliche Kompetenzstelle für Bauwerksbegrünung in Österreich: Sie gibt Impulse und vernetzt innovative Produkte und Projekte, liefert Know-How und Analysen für die Praxis und begleitet urbane und partizipative Entwicklungsstrategien bis zur Umsetzung.
GrünStattGrau – Innovations for Greening Cities "The green living laboratory"
GrünStadtGrau represents the holistic of competence for green building technologies such as green roofs and living walls in Austria. It generates impulses for urban green infrastructure on buildings and links innovative products and projects, supports through know-how and analysis for implementation processes. GrünStattGrau guides urban and participatory strategies from development to implementation.
Innovationslabor act4energy
Mit dem Innovationslabor act4energy wurden eine Plattform und die Infrastruktur-Voraussetzungen für die Lösung des Problems der stark fluktuierenden Verfügbarkeit von Erneuerbaren Energien geschaffen, mit Schwerpunkt auf die PV-Strom-Eigenoptimierung.
Itz Smart – CO2 neutrale Stadtteilentwicklung Itzling, Umsetzung von Innovation und Technologie durch kooperative Prozessgestaltung
Ziel des Projekts „Itz Smart“ ist die Anknüpfung an bestehende Aktivitäten und die konsequente Weiterentwicklung des Wohnstandorts Itzling. Im Test- und Demonstrationsgebiet werden im Bereich der Verkehrsachse (Bahn und Schillerstraße) bzw. angrenzend an die Nahversorgungsachse (Itzlinger-Hauptstraße) nachhaltige Wohnquartiere mit zukunftsweisenden Mobilitätslösungen entwickelt. Die Betrachtung von „Wohnen und Mobilität“ zieht unter dem Aspekt „Stadt der kurzen Wege“ auch die Auseinandersetzung mit gezielter Mischnutzung und der Entwicklung solcher Quartiere nach sich.
Itz Smart – Carbon neutral city district development Itzling – Implementing innovation and technology via co-operative process design
The goal of the project “Itz Smart” is to tie in with existing activities and to consistently develop Itzling as a residential location further. In the test and demonstration area, sustainable residential quarters with trendsetting solutions for mobility are developed in the zone of the transport axis (railway and Schillerstraße) and along the local supply axis (Itzlinger Hauptstraße). The consideration of housing and mobility with regard to the aspect of “city of short ways“ also entails a discussion of determined mixed utilisation and the development of such residential quarters.
Klett-TGA - Entwicklung von Klett - Befestigungssysteme für die Technische Gebäudeausrüstung
Ziel dieser Sondierung ist eine Systemveränderung bei der Montage der TGA, welche zukünftig einen universelleren Einsatz von Klett ermöglicht.
AR-AQ-Bau - Einsatz von Augmented Reality zur Abnahme und Qualitätssicherung auf Baustellen
Ziel dieses Forschungsprojektes ist die Entwicklung eines baustellentauglichen Augmented-Reality-(AR)-Systems inklusive eines Remote-Expert-System und eines BIM-Closed-Loop Datenübertragungssystem zur Verbesserung der Bauqualität, Gebäudesicherheit und Energieeffizienz sowie zur Effizienzsteigerung im Baucontrolling.