Suchergebnisse
OptiMAS - Optimierung der Gebäudeenergieeffizienz durch modellbasierte Energiestromanalyse mit non-invasiver Sensorik
OptiMAS untersuchte, wie durch eine modellbasierte Energiestromanalyse und unter Verwendung von Anlegesensorik bestehende Gebäude überwacht, analysiert und optimiert werden können, unabhängig von den darin verwendeten HLK-Systemen und deren Automationskomponenten. Mit dem OptiMAS Ansatz kann das Optimierungspotential von Einzelgebäuden bis hin zu ganzen Arealen und Stadtteilen erfasst, lokalisiert und durch Anpassung von Systemparametern höchstmögliche Energie- und Ressourceneffizienz sichergestellt werden.
baubehoerde.at - Ausarbeitung einer Vision 2030 und Handlungsempfehlungen für eine digitale Baubehörde mit Stakeholdern in Österreich
Die Einreichung von Baugenehmigungsgesuchen und Abwicklung der Bauverfahren finden in Österreich weitgehend analog statt. Ziele des Projektes baubehoerde.at sind die Evaluierung der Möglichkeiten und Grenzen der Digitalisierung von Abläufen in Bauverfahren und die Erstellung einer Vision 2030 für eine digitale Baubehörde.
baubehoerde.at - Development of a Vision 2030 for a Digital Building Authority and Recommendations for Action in Austria
In Austria, planning permission applications are submitted and managed largely manually. The aims of the baubehoerde.at project are to evaluate the potential and limitations of digitizing building approval processes and to create a Vision 2030 strategy for a digital building authority.
ÖKO-OPT-AKTIV - Optimiertes Regelungs- und Betriebsverhalten thermisch aktivierter Gebäude zukünftiger Stadtquartiere
Entwicklung und Simulation skalierbarer, verteilter Regelstrategien zur Nutzung der Speicherwirkung thermisch aktivierter Bauteile in Gebäuden zukünftiger Stadtquartiere bei deren Energieversorgung durch eine Energiezentrale.
ÖKO-OPT-AKTIV - Optimised control and operating behaviour of thermally activated buildings in future urban districts
Development and simulation of scalable, distributed control strategies for the use of the storage effect of thermally activated components in buildings of future city districts for their energy supply by an energy centre.
ÖKO-OPT-QUART - Economically optimized control and operating mode of complex energy networks of future city districts
In the project ÖKO-OPT-QUART energy-based, economic and control-orientated models will be developed in order to simulate the operating mode of complex, sustainable energy networks in city districts. For an exemplary configuration these models will be combined to an overall model which allows a realistic economic comparison of different control strategies. The final goal of the project is the development of a method for the systematic design of cost-optimized, predictive control strategies for complex energy networks in city districts.
Innovationslabor act4energy
Mit dem Innovationslabor act4energy wurden eine Plattform und die Infrastruktur-Voraussetzungen für die Lösung des Problems der stark fluktuierenden Verfügbarkeit von Erneuerbaren Energien geschaffen, mit Schwerpunkt auf die PV-Strom-Eigenoptimierung.
Move2Grid – Implementation of regional energy-supply-concepts by hybrid coupling
Based on the results of the national-funded exploratory projects called “Smart Exergy Leoben”, and “Energy Sponge Bruck”, the present implementation project aims at analysing how local, renewable resources support the supply of electric mobility in Leoben in the long term and to integrate it into the municipal distribution grid in a good economic sense.
digiaktiv - digitale Transformation für größere Interaktivität in der Technische Gebäudeausrüstung-Planung
Das Projekt digiaktiv verfolgte, eine Verbesserung der Interoperabilität zwischen den unterschiedlichen Baugewerbegewerken durch neutrale, offene semantische Datenmodelle zu ermöglichen. Dabei trägt digiaktiv mittels digitaler Transformationsprozesse zur Steigerung der Planungsqualität und dem Betrieb von Bauwerken, sowie zur Minimierung des Schnittstellenrisikos bei.
digiactiv - digital transformation for more interactivity in MEP-(mechanical, electrical and plumbing-)planning
The aim of the digiactiv project was to improve the interoperability between the different stakeholders in the building construction sector using open and neutral semantic data models. With digital transformation processes, digiactiv helps to increase the quality of planning and the operation of buildings, as well as to minimize the interface risk between various stakeholders.
CHALLENGE - Hocheffiziente Heißgas- und Abwärmenutzung in Luft/Wasserwärmepumpen für Plus-Energie-Gebäude und -Quartiere
CHALLENGE zielt darauf ab, das Konzept für Luft/Wasser-Wärmepumpen weiterzuentwickeln, dass diese hocheffizient in dicht bebauten, urbanen Gebieten eingesetzt werden können. Konkret soll mittels validierter Simulationen sowie eines Funktionsmusters des Gesamtsystems im Labormaßstab der Nachweis erbracht werden, dass 10% an elektrischer Energie eingespart, der Schall der Außengeräte im Sommer auf ein Minimum reduziert, sowie die Bildung lokaler Hitzeinseln vermieden werden kann.
CHALLENGE - Highly efficient use of hot gas and waste heat in air/water heat pumps for plus-energy buildings and quarters
CHALLENGE aims to further develop the system concept for air-to-water heat pumps in such a way that they can be used efficiently and without the above mentioned negative effects in densely built-up urban areas. In concrete terms, validated simulations and a functional model of the overall system on a laboratory scale are to be used to demonstrate that the concept can save 10% of electrical energy, reduce the noise of outdoor units in summer to a minimum and prevent the formation of local heat islands.
Move2Grid - Umsetzung regionaler Elektromobilitätsversorgung durch hybride Kopplung
Aufbauend auf den Ergebnissen der „Stadt der Zukunft“ Sondierungsprojekte „Smart Exergy Leoben“, und „Energieschwamm Bruck“ soll im gegenständlichen,umsetzungsorientierten Forschungsvorhaben anhand des Beispiels Leoben untersucht werden, wie mit regionalen, erneuerbaren Ressourcen regionale Elektromobilität langfristig versorgt, optimal ins kommunale Verteilernetzsystem integriert und ökonomisch nachhaltig implementiert werden kann.
SonnWende+ Efficient solutions for photovoltaic energy management based on block chain technology
The project deals with the analysis of Blockchain technology in the context of renewable electricity producers and flexibility as enabler for innovative service concepts, tested in the innovation-lab “Energie Innovation Cluster Südburgenland”. The goal is to find new and efficient Blockchain-based solutions for services in energy management and trading in a local level.
6D BIM-Terminal: Missing Link für die Planung CO2-neutraler Gebäude
Das Projekt soll die Lücke zwischen FachkonsulentInnen und Building Information Modeling (BIM) Applikationen schließen. Daten, die für die Betrachtung von Kosten, Terminen und Nachhaltigkeitsaspekten notwendig sind, sollen bei BIM-Elementen ergänzt und in die jeweilige Fachplanungs-Software eingelesen werden können. Der Datenaustausch soll unter Verwendung der IFC-Schnittstelle nach ÖN A6241-2 und der Merkmale des ASI-Merkmalservers über eine zentrale Plattform, das „6D BIM-Terminal“, erfolgen.
6D BIM-Terminal: Missing Link for the development of CO2 neutral buildings
The present project aims to close the gap between specialist consultants and Building Information Modeling (BIM) applications. For that, relevant data for cost estimation, scheduling construction planning and management or sustainable building operation and facility management, shall be added automatically to BIM elements and imported into the respective specialist planning software. This data exchange shall be carried out using IFC interface according to ÖNORM A6241-2 and the properties of the ASI properties server via a central platform, the "6D BIM-Terminal".
SonnWende+ Effiziente Lösungen für Photovoltaik-Energiemanagement basierend auf Blockchain-Technologie
Das Projekt analysiert Blockchain-Technologie im Kontext erneuerbarer elektrischer Einspeisung und Flexibilität im Innovationslabor "Energie Innovation Cluster Südburgenland". Ziel ist die Erforschung neuer und effizienter Lösungen für Energiemanagement-Services und Energiehandel.
SolCalc: Entwicklung eines normierbaren Rechenalgorithmus für die Energieverbrauchsschätzung und die Energieausweiserstellung von Wohngebäuden mit einem solaren Deckungsrad bis 100% unter Berücksichtigung optimaler Einbindung von Biomasse und Wärmepumpen
Entwicklung eines normierbaren Rechenalgorithmus für die Energieverbrauchsschätzung und die Energieausweiserstellung von Wohngebäuden mit einem solaren Deckungsrad bis 100% unter Berücksichtigung optimaler Einbindung von Biomasse und Wärmepumpen.
SolCalc: Development of a standardized calculation algorithm for the energy consumption assessment and the energy certification of residential buildings with a solar fraction of up to 100% in combination with biomass boilers and heat pumps
Development of a standardized calculation algorithm for the energy consumption assessment and the energy certification of residential buildings with a solar fraction of up to 100% in combination with biomass boilers and heat pumps
ÖKO-OPT-QUART - Ökonomisch optimiertes Regelungs- und Betriebsverhalten komplexer Energieverbünde zukünftiger Stadtquartiere
Im Projekt ÖKO-OPT-QUART wurden energietechnische, ökonomische und regelungstechnische Modelle zur Simulation der Betriebsführung komplexer, nachhaltiger Energieverbünde für Stadtquartiere entwickelt. Diese Modelle werden danach für eine Beispielkonfiguration zu einem umfassenden Gesamtmodell kombiniert und erlauben einen realistischen ökonomischen Vergleich verschiedener Regelungsstrategien. Das übergeordnete Ziel des Projekts ist die Entwicklung einer Methode zur systematischen Erstellung kostenoptimierender, vorausschauender Regelungsstrategien für komplexe Energieverbünde in Stadtquartieren.