Suchergebnisse

IEA HPT Task 42: Heat pumps in smart energy grids for sustainable cities

The aim of Annex 42 is to analyse the technical possibilities as well as the economic/regulatory framework conditions of heat pumps for load balancing in smart grids, which are largely controlled by electricity supplier, and to investigate the impact on thermal consumers and possible potentials, in order to work out economic incentive models for load shifting and the benefits for energy supply companies and end customers on this basis.

IEA EBC Annex 80: Resilient Cooling for Residential and Small Non-Residential Buildings

In the project cost and energy-efficient and non-fossil solutions for cooling and ensuring summer suitability are systematically analyzed and further developed. As part of the international R&D co-operation, fragmented knowledge is bundled and made available to the Austrian construction and mechanical engineering industry. Austrian expertise in climate-sensitive building optimization is disseminated internationally through leading participation in this international research.

BBI JU Stakeholder Forum 2019

4. December 2019
Egg Congress and Meeting Center Brussels, Belgium

The BBI JU Stakeholder Forum 2019 will bring together the bio-based industries community and facilitate open discussion on the impact, achievements and strategic direction of the Bio-based Industries Joint Undertaking (BBI JU) programme, as well as the latest developments in the bio-based industries sector.

IEA EBC Annex 63: Implementation of Energy Strategies in Communities

As part of the "Annex 63" project, Austria has worked with 10 other countries to develop guidelines for the successful implementation of energy strategies at local level. The results include support for nine strategic measures, descriptions of case studies, support materials and recommendations for different target groups.

IEA EBC Annex 79: Occupant-Centric Building Design and Operation

The IEA EBC Annex 79 aims to provide new insights into comfort-related occupant behaviour in buildings and its impact on building energy performance as well as occupant-centric building design and operation.

IEA HPT Annex 49: Design and integration of heat pumps for nZEB

A dominating concept to reach a nearly Zero Energy Building (nZEB) is the combination of solar PV systems and heat pumps. The extended scope of the Annex 49 regards the balance of single buildings and groups of buildings/neighbourhoods, a thorough investigation of heat pump integration options for nZEBs and nZE neighbourhoods by means of monitoring and simulation as well as the design and control optimization for heat pumps in nZEB and the integration into energy systems.

IEA HPT Annex 48: Industrial Heat Pumps, Second Phase

Industrial heat pumps enable the use of waste heat and increase the energy efficiency of industrial processes. The aim of this project was to provide comprehensive information on the successful application of industrial heat pumps and thus contribute to the further dissemination of this technology.

User-Centred Energy Systems - Webinar: Introducing the Global Observatory on Peer-to-Peer, Community Self-Consumption and Transactive Energy Models (GO-P2P)

18. November 2020, 3.00 pm CET (Bruxelles, Vienna)
Online

IEA EBC Annex 62: Ventilative Cooling

The main goal of the Annex 62 is to make ventilative cooling an attractive and energy efficient cooling solution to avoid overheating in buildings. Ventilation is already present in buildings through mechanical and/or natural systems and it can remove excess heat gains as well as increase air velocities to widen the thermal comfort range. The results from the Annex facilitate better possibilities for both design purposes and for energy performance calculation.

IEA HPT Annex 43: Fuel Driven Sorption Heat Pumps

The project aimed at investigating the performance and market potential of gas-fired absorption heat pumps (AHPs) in domestic and small commercial or industrial buildings or applications. Selected processes were simulated for various types of buildings in order to calculate the energetic, ecological and economical potential of this technology. The results were compared with monitoring data of a gas-fired AHP system. In addition, a market survey including market barriers for gas-fired AHPs in Austria was conducted and a list of market supporting measures was compiled.

IEA HPT Annex 55: Comfort and Climate Box – Speeding up market development for integrating heat pumps and storage packages

In the IEA HPT Annex 55, heat pumps with integrated thermal/electrical storage systems for existing buildings that are as close to the market as possible were developed. Furthermore, measures to accelerate market development have been worked out.

IEA HPT Annex 54: Heat pump systems with low GWP refrigerants

The aim of the project was to investigate the current situation in the area of refrigerants with a low global warming potential ("low-GWP"). The focus of the national project lies on the current refrigerant application situation and on an outlook until 2030 on the availability of components and systems.

IEA AFC Annex 34: Fuel Cells for Transportation (Working period 2019 - 2022)

The overall objective of the project is the advancement of fuel cells in transportation applications. To ensure a comprehensive penetration of the automotive market, the focus will be laid on the cost-reduction potential of fuel cell components and systems including hydrogen storage, the hydrogen infrastructure and fuel cell vehicles in public transportation as well as fuel cell powered utility vehicles.

IEA HPT Task 41: Cold Climate Heat Pumps

The aim was to increase the efficiency of outdoor air heat pumps in cold climates in locations with low outside temperatures of up to -25°C. Newly developed heat exchanger concepts were tested and optimized regarding their icing behaviour. Different circuit modifications were modelled and simulation studies for low ambient temperatures were carried out.

IEA EBC Annex 60: New generation computational tools for building and community energy systems based on the Modelica and Functional Mockup Interface standards

The objective was to develop and demonstrate next-generation computational tools that allow building and community energy grids to be designed and operated as integrated systems. The work conducted in Annex 60 has helped to share, further develop and deploy free open-source contributions of previously uncoordinated activities in modeling and simulation, based on the Modelica and Functional Mockup Interface standards.

IEA EBC Annex 61 - Business and Technical Concepts for Deep Energy Retrofit of Public Buildings

Target of IEA EBC Annex 61 was the development of technical and economical concepts for Deep Energy Retrofit of public buildings. To force high-quality and energy efficient retrofit, besides the enhancement and dissemination of innovative, technical retrofit concepts, the focus was in the development of innovative business models (energy-contracting).

IEA EBC Annex 82: Energy flexible buildings towards resilient low carbon energy systems

In the future, buildings and building clusters should be able to provide energy flexibility services for different types of energy systems. The project increases knowledge about the obstacles and motivation for the stakeholders involved. Their constructive engagement is a key to making the energy flexibility of buildings a value for the resilience of future energy networks.

IEA EBC Annex 81: Data-Driven Smart Buildings

The latest developments in digitization have the potential to significantly reduce the costs of building operations. The annex is intended to improve access to low-cost, high-quality data from buildings and to support the development of data-driven energy efficiency applications and analyses. This enables the optimization of building controls in real time and offers energy efficiency data and decision support for building managers.

IEA HPT Annex 51: Acoustic Signatures of Heat Pumps

The aim of the project was to increase the acceptance of heat pumps by reducing their noise emissions and vibrations and to reduce market barriers. Using innovative measurement and data analysis methods, influencing factors on the acoustic emissions of heat pump systems and the impact of acoustic protection measures were investigated. The results were prepared in the form of guidelines and recommendations for action.

IEA Wind Task 19: Wind Energy in Cold Climates (working period 2016 - 2018)

IEA Wind Task 19 deals with the challenges of the utilisation of wind energy in Cold Climates (i.e. under icing-conditions) and offers through global networking and mutual exchange of experience, the possibility of collecting and generating additional know-how. Aim of the subtask was to share experiences with international partners and standardising of icefall risk assessments. In addition, an evaluation report on the functionality of the new Vestas rotor blade heating system was published.