Suchergebnisse

IEA DSM Task 17 - Extension: Integration of Demand Side Management, Distributed Generation, Renewable Energy Sources and Energy Storages (working period 2013 - 2016)

The aim was to exchange experiences and developments in the field of integrating renewables with the help of DSM in residential and commercial buildings. Technologies like PV systems, electric vehicles, electric storages, heat pumps, micro-CHP in combination with energy management systems (via gateways), and implementing dynamic tariffs using smart meters offer huge potential to increase energy efficiency. Phase 3 of this Task addressed the current role and potential of flexible buildings and their related implied changes and impacts on the grid and markets. The scalability and applicability of successful projects with respect to specific regional differences and requirements was also explored.

IEA Demand Side Management Energy Efficiency (DSM TCP)

Demand Side Management (DSM) refers to the implementation of energy efficiency improvements and service management measures on the side of end users for optimising energy systems overall. This IEA-research programme pushes development of suitable technologies, applications and methods for end users and thus facilitates their preferential adoption in all political decisions on energy policy.

IEA DSM Task 17: Integration of Demand Side Management, Distributed Generation, Renewable Energy Sources and Energy Storages

The main objective of the proposed Task is to study how to achieve the optimal integration of distributed generation, energy storages and flexible demand, and thus increase the value of distributed generation and demand response and decrease problems caused by intermittent distributed generation (mainly based on RES) in the physical electricity systems and at the electricity market. The Task deals with distributed energy resources both at local (distribution network and customer) level and at transmission system level where large wind farms are connected.

IEA DSM Task 24: Behaviour Change in DSM – Helping the Behaviour Changers (Working period 2015-2017)

More than 20% of the use of energy for small consumers can be saved by changed behaviours. Past efforts to tap these potentials through DSM-interventions are not effective. The Task 24 dealt with the most important actors groups as well as tools, which support the behaviour changers in their daily work. In addition, an assessment method for DSM-interventions in the frame of the Austrian law on energy efficiency was elaborated.

Working Party on End-Use Technologies (EUWP)

The International Energy Agency (IEA) Working Party on Energy End-Use Technologies, often referred to as End-Use Working Party (EUWP), has been in the advisory council for the Committee on Energy Research and Technology (CERT) in the area of end-use energy technologies since 1981. It also functions as reference for questions on end-use energy within the IEA Secretariat.

IEA SHC Task 61/EBC Annex 77: Integrated Solutions for Daylighting and Electric Lighting

Lighting accounts for around 15% of global electricity consumption - intelligent coordination of daylighting and electric lighting solutions together with integral lighting controls enable significant energy savings. At the same time, the solutions must be optimally planned in a user-centered approach based on the visual and non-visual effects of light. The task analysed user requirements as well as existing technologies and design methods and documented exemplary implementations in case studies.

IEA SHC Task 59/EBC Annex 76: Deep Renovation of Historic Buildings - Towards lowest possible energy demand and CO2 emission (nZEB)

The goal of Task 59 was to document international best practice examples (knowledge base), develop a multidisciplinary planning process, and develop holistic retrofit solutions for historic buildings. As a knowledge base, the Historic Building Retrofit Atlas (www.HiBERatlas.com) emerged from the project. In the HiBERatlas more than 55 best practice examples are documented. In addition to the management of Subtask A (Knowledge Base) and Subtask C (Conservation compatible retrofit solutions & strategies), innovative technical and organizational retrofit solutions, which have already been applied in national demonstration projects and tested in practice, have been incorporated and further developed through the Austrian participation.

IEA 4E Product Energy Efficiency Trends (PEET) Project – 4 Reports

The Product Energy Efficiency Trends (PEET) project aims to monitor the energy efficiency of selected product groups in the 4E member countries and regions, to provide information on progress from year to year. The latest PEET reports published in 2022 summarize the state of energy efficiency regulations for four product groups. These are: electric motors, room air conditioners, televisions and monitors, and household refrigerators.
Herausgeber: IEA - 4E Energieeffiziente Endverbrauchsgeräte, 2022
Englisch

Opportunity Cost Tool & Comparison and Evaluation of Financing Options for Energy-Contracting Projects (2008)

Task XVI - A manual for ESCOs, ESCO customers and ESCO project developers.1. Despcription of a methodology to compare finance options for energy service projects and 2. Opportunity Cost Tool: Estimation and Visualization of Energy Costs, Saving Potentials and Future Energy Cost Savings for the development of energy-contracting projects. Englisch

Comprehensive Refurbishment of Buildings through Energy Performance Contracting (2008)

Comprehensive Refurbishment of Buildings through Energy Performance Contracting - A Guide for Building Owners and ESCos Englisch

IEA ES Annex 50: Prefab Systems for Low Energy/High Comfort Building Renewal

Development of integrated concepts for multi-storey buildings, which enable renovations of buildings with high energy efficiency at good user acceptance during the realisation phase as well as afterwards (comfort, affordability). Relevant components: integrated solutions of roof and façade with high rate of pre-fabrication, the possibility of integrating the energy façade/roofs and energy distribution and supply.

IEA ES Task 43: Storage for renewables and flexibility through standardized use of building mass

Thermal building mass activation uses building masses to condition interior spaces, but can also function as energy storage through targeted overheating/undercooling. This storage potential can be used for local and grid-connected renewable thermal and electrical energy (Power2Heat). The project develops new content on the construction, control and business models of such storages and disseminates it as guidelines, data and on the basis of best-practice objects that have been implemented.

IEA ES Annex 39: Large Thermal Energy Storages for District Heating

Large-scale heat storage systems will play a central role in increasing the necessary flexibility of district heating networks and enable the further expansion of renewable energies. The main objective of the Annex is to determine the aspects that are important in planning, decision-making and implementing large thermal energy storages for integration into district heating systems and for industrial processes, given the boundary conditions for different locations and different system configurations.

IEA Energy Storage (ES)

The aim of the IEA Energy Storage (ES) Technology Programme is to enable integrated research, development, implementation and integration of energy storage technologies in order to optimise the energy efficiency of all types of energy systems and to promote the use of renewable energy sources instead of fossil fuels.

IEA ES Task 35: Flexible Sector Coupling through Energy Storage Implementation

Task 35 of the IEA Energy Storage TCP addressed Flexible Sector Coupling (FSC) through the implementation of energy storage and examined the role of energy storage in the context of the concept of sector coupling. The demand sectors include electricity, heating/cooling and mobility. FSC was defined, examples of FSC were described and studies on the use of FSC in local and the German national energy systems were carried out.

IEA ES Task 44: Power-to-Heat and Heat integrated Carnot Batteries for Zero-Carbon (industrial) heat and Power supply

The rise of renewable energy causes fluctuating energy production. The electrification of heat supply further challenges the electricity grid. Coupling electricity and heating with thermal storage helps to strengthen grid resilience and ensures stable energy supply. This project identifies and evaluates heat-integrated Carnot battery concepts to store thermal and electrical energy and supply electricity and thermal energy on demand.

IEA ES Task 41: Economics of Energy Storage

What is the value of energy storage and how can it be quantified? How can the benefits and value of energy storage be translated into promising business models? The Task will conduct a coordinated methodological assessment of the economic viability of energy storage (electrical, thermal, and chemical) in applications relevant to the energy system. This will be used to derive preferred conditions for energy storage configurations.

IEA ES Task 36: Carnot Batteries

Carnot Batteries are an emerging technology for the inexpensive and site-independent storage of electric energy at medium to large scale (> 1.000 MWh). The technology transforms electricity into thermal energy, stores it in inexpensive media such as water or molten salt and transforms the thermal energy back to electricity as required. Carnot Batteries have the potential to solve the global storage problem of renewable electricity in a more economic and ecologic way than conventional batteries.

IEA ES Annex 49: Low Exergy Systems for High-Performance Buildings and Communities

The objective of Annex 49 is the development of approaches for reducing the exergy demand of buildings, so as to reduce the CO2 emissions of the building stock and support structures for sustainable and reliable energy systems in the building sector. To achieve the objectives of Annex 49, the following activities have been carried out:Application of exergy analysis and providing tools, guidelines, best-practice examples and background information for planners and decision makers in the fields of construction, energy and politics Support of cost-efficient low-energy/exergy measures for renovation and new building taking into account both the residential and the service sector Promotion of exergy-related performance analysis of buildings, particularly from the perspectives of communities / regions

IEA ES Task 45: Accelerating the uptake of Large Thermal Energy Storages

The aim of Task 45 is to accelerate the market launch of large-scale heat storage systems. For this purpose, numerical simulation techniques and material measurement techniques are to be improved and a material database expanded. In addition, a standardized evaluation and communication basis will be developed leading to a method for yield assurance. The methods and findings will be disseminated specifically to municipal utilities, planners and operators of district heating systems as well as decision-makers.