Suchergebnisse
CiQuSo - City Quarters with optimised solar hybrid heating and cooling systems
The project CiQuSo aimed to develop, evaluate and optimize concepts for solar energy systems to provide energy for buildings and cities. The applicability of the developed methods and concepts were shown as an example at Itzling, a part of Salzburg city.
PEAR - Prüfstand für energieeffiziente Automation und Regelung von Gebäuden
Der mit dem Planungsstand errechnete Energiebedarf deckt sich oft nicht mit den gemessenen Werten des Betriebs. In diesem Projekt werden Automation und Regelung auf den Prüfstand gestellt und eine Lösung zur Bewertung der Energieeffizienz von Regelstrategien in den Bereichen Raumlufttechnik, Betonkernaktivierung und Free Cooling entwickelt, welche anhand des Bauprojekts „Post am Rochus“ validiert wird.
P2H-Pot: Potentiale, Wirtschaftlichkeit und Systemlösungen für Power-to-Heat
In P2H-Pot wurden die wettbewerbsfähigen Potentiale für Power-to-Heat (P2H) im urbanen Raum bestimmt. Mittels thermodynamischer Simulationen wurde die Eignung verschiedener technischer P2H Systemkonfigurationen untersucht und die Ergebnisse wurden mit Praxiserfahrungen aus Skandinavien kombiniert. Basierend auf einer Simulation des Strom- und Wärmemarktes in Deutschland und Österreich wurde die kurz, mittel- und langfristige Relevanz und Wirtschaftlichkeit von P2H analysiert. Gemeinsam mit einem Fernwärmeunternehmen wurden drei Fallstudien durchgeführt.
E_PROFIL - neighborhood profiles for optimized energy transformation processes
E_PROFIL is a set of methods (an IT-supported toolkit) for the elaboration of neighbourhood profiles. The aim of the project is to facilitate an energy and resource efficient development in the planning practice of Austrian cities. Furthermore, the project is an important asset for research and planning activities in Europe and can also be applied to other neighbourhoods.
BIM4BEMS - Building Information Modeling for Building Energy Management Systems
BIM4BEMS explores use cases that represent the usage of building information models (BIM) in combination with building energy management systems (BEMS) during operation. This enables the interaction between BIM and building management systems (BMS) which improves the analysis and visualization of inefficiencies in facilities.
P2H-Pot - Potentials, economic feasibility and system solutions for Power-to-Heat
P2H-Pot has identified economically feasible potentials for Power-to-Heat (P2H) in urban regions. The suitability of different technical system configurations were investigated using thermodynamic simulation and considering experiences from Scandinavian cases. The assessment of short, medium and long term relevance and economic feasibility of P2H were accomplished by simulating model-based scenarios up to 2050 of the Austrian and German electricity and heat market. In cooperation with a district heating company three case studies have been carried out.
CityCalc - Energieplanungs- und Bewertungsinstrument für den Städtebau
Mit CityCalc wurde ein leicht anwendbares Planungs- und Bewertungsinstrument entwickelt, das die energetische Performance von städtebaulichen Projekten bereits in frühen Planungsphasen mit geringem Eingabe- und Bewertungsaufwand beurteilen kann.
Workshop: Roadmap zur integrierten urbanen Solarenergienutzung
3. Oktober 2016
FH Joanneum, Alte Poststraße 154, 8020 Graz
Bei diesem Stakeholderworkshop wird der Entwurf der Roadmap zur integrierten urbanen Solarenergienutzung vorgestellt. Außerdem erhalten Sie als ExpertInnen die Möglichkeit sich in die Gestaltung der Roadmap einzubringen.
HOTSPOTS - Holistic thermographic screening of urban physical objects at transient scales
Die Projektidee verknüpft messtechnische Innovationen in der Erfassung und Generierung stadtbezogener Daten mit neuartigen Prozessketten in der Datenauswertung und Analyse. Auf Basis wissenschaftlicher Ansätze erarbeitet HOTSPOTS eine durchgängige Verfahrenskette die künftige Auswahlverfahren im Bereich von baulichen Maßnahmen der Stadtentwicklung auf eine nachvollziehbare und (mess-)datengetriebene Basis stellt, und somit das Risiko von ad-hoc Entscheidungen oder Fehlinvestitionen reduziert.
TFlex - Temperaturflexibilisierung im Schwachlastbereich des Betriebs von Nahwärmenetzen
Im Zuge des Vorhabens TFlex wurde untersucht, ob sich die Netzverluste bestehender Nahwärmenetze in Schwachlastzeiten dadurch verringern lassen, indem in diesen Zeiträumen das Netz abschaltet und der Wärmebedarf der Kunden aus zuvor geladenen dezentralen Speichern bedient wird. Eine durchgängige wirtschaftliche Begleitung erlaubte es, bereits in der Projektlaufzeit technische Projekterfolge rasch in die Umsetzung zu bringen.
HOTSPOTS - Holistic thermographic screening of urban physical objects at transient scales
HOTSPOTS enables new insights and perspectives for city development. According to the project idea innovations in acquisition and sensing as well as densification of geo-referenced city related data are supplemented by novel processing chains in city data analytics. Driven by an integrated scientific approach we develop a novel method in the selection, evaluation and prioritization of infrastructural city development measures which is directly derived from sensed data hence reducing the risk of ad-hoc decisions or lack in impact.
EDEN - Developement of a structured data and preparation documentation with a minimized error-proneness for energy performance cerificates.
Current energy performance certificates hold major flaws. Therefore, the presented research initiative aimed at the development of a standardized and easy-to-use, generic Input-Data-Documentation, which ensures the quality of energy certificates for all involved stakeholders. During the development, the documentation had been conducted and for a chosen sample of representative buildings, which is expected to demonstrate the high potential of such a development.
Manage_GeoCity - Entwicklung einer Methodik zur koordinierten Nutzung und Bewirtschaftung der oberflächennahen Erdwärme in urbanen Räumen
Anhand der Modellregion Graz wurde eine Methodik für die koordinierte Nutzung und Bewirtschaftung oberflächennaher Erdwärme für Wärme- und Kühlanwendungen sowie saisonaler Speicherung in urbanen Räumen entwickelt. Dabei wurden Grundwasserströmungen, unterschiedliche geologische Verhältnisse, Wärme- und Kühlbedarf, Wärmeeintrag von Solaranlagen und betrieblicher Abwärme und die Möglichkeiten der saisonalen Speicherung von Wärme im Untergrund berücksichtigt.
Using buildings as energy storage - Monitoring project: Detached house H and detached house F Energy source wind power – Energy source solar power
Monitoring and comparison of performance of thermally activated building components in two similarly built, inhabited detached houses with different energy sources (wind and solar power). The functionality of energy supply through wind power or solar energy will be investigated as well as the verification of the practicability of self-regulating system control due to building temperature behaviour. The results provide an insight into the calculation assumptions, system control and feasibility of the smart grid technology.
Passivhauswohnen³: Facility Management for Residential Property Developers: A Key to Optimizing the Reduction of Energy and Operation Costs
What soon will be considered "standard" in ecological building must be carried out by the property developer and accepted by the future user. Therefore, in order to assist a smooth implementation of the new passive housing technique and begin the corresponding feedback mechanisms, a specific KMU "quality and incentive model" should be launched. The interrelationship of this model is designed with the property developer as well as the user in mind and aims for lasting "behavior modification" in energy and operational expense consumption.
SIMULTAN - Simultane Planungsumgebung für Gebäudecluster in resilienten, ressourcen- und höchst energieeffizienten Stadtteilen
Es soll die Möglichkeit zur Steigerung der Effizienz gebäudeübergreifender Energiesysteme geschaffen werden um dem Ziel resilienter Städte und Stadtteile mit hoher Lebensqualität, Ressourcen- und Energieeffizienz nahe zu kommen. Ziel war ein auf simultaner technischer Planung basierendes praxistaugliches Werkzeug zur Entscheidungsunterstützung bei Sanierungs- und Neubauplanungen (bis zu Plusenergiegebäuden) in hocheffizienten Stadtteilen.
InnoGOK – Untersuchung der energetisch und ökologisch verwertbaren Nutzbarkeit der solaren Einstrahlung auf urbane Plätze und Wege
Untersuchung von befestigten und unbefestigten horizontalen Flächen im städtischen Raum für die Energienutzung womit ein nicht unwesentliches Potential zur Ressourcenschonung und Energieeffizienz im städtischen Kontext besteht. Zudem verspricht die Wärmeabfuhr großer solar erwärmter Oberflächen der Bildung urbaner Hitzeinseln vorzubeugen.
SIMULTAN - Simultaneous planning environment for buildings in resilient, highly energy efficient and resource-efficient districts
This project enabled the opportunity for an essential energy efficiency increase within overlapping buildings, to achieve the objective of resilient cities and districts with respect to a high quality of life, resource sustainability and energy efficiency. The goal was a workable tool based on a multidisciplinary planning approach, to support the decision finding process in order to design both refurbishment projects and new developments within a highly efficient city.
SynENERGY - Energy optimised settlement development by making use of synergies of energy efficiency, spatial planning and building culture
SynENERGY aims at an innovative, holistic approach to urban district optimization. The project targets a comprehensive analysis of the framework and urban development concept which includes not only optimisation of sustainable energy supply and use but also increased material flows (construction and disposal) at urban district level.
LTS-Flywheel als 12h-Energiespeicher: Neue Ansätze zur Erhöhung der wirtschaftlich nutzbaren Speicherzeit und Sicherheit
Entwickelt wurden die Grundlagen für ein Long Term Storage (LTS)-Flywheel zur dezentralen Zwischenspeicherung von elektrischer Energie (z.B. aus Windkraft- oder PV-Anlagen), mit wesentlich höherer Speicherzeit (Ziel: 12h) und Betriebssicherheit bei geringen Systemkosten. Dieses Projekt stellt die Basis für einen weiteren Schritt Richtung Plus-Energie-Haus dar.