Suchergebnisse
Production of bioethanol in addition with heat, power and valuable byproducts
The production of bioethanol in Bruck/Leitha in addition to the production of heat, power and valuable by-products from biomass will be optimized by a new process simulation tool under the target of maximum usage of waste and low temperature heat and optimal source and product usage.
Refrigerating plants in hotel and catering industry
To the frequent uses of refrigerating plants in hotel and catering industry was not paid a lot of attention in the way of energy efficiency so far. We are talking about plug-in cooling units and custom-made cooling equipment. Aim of the project: finding out the manner and amount of refrigeration usage, as well as the estimation of energy savings potential and measures, especially for custom-made cooling equipment.
Integration methods for solar heat into industrial production processes
The project aims at the development of integration methods for solar heat into industrial production process with batch operations as typical for SMEs
Development of agitation systems in biogas plants in order to optimize mixing-behaviour and to reduce energy demand with the help of Computational Fluid Dynamics (CFD) simulation
The purpose of this project is the investigation of the mixing-behaviour and performance of the agitation systems in biogas plants, and to present them through Computational Fluid Dynamics (CFD) simulation. This EDP-tool can model and predict the actual fluid dynamics in a closed system. Thus it may help to plan optimal reactor geometries, position and combination of agitation systems as well as to minimize the energy requirements.
IEA HPP Annex 33: Compact heat exchangers for heat pumping equipment
International cooperation aiming at widening the use of compact heat exchangers in heat pumping equipment. The goal of this project is to identify compact heat exchangers, either existing or under development, that may be applied in heat pumping equipment such as compression or absorption heat pumps.
IEA AFC: Technology Collaboration Programme on Advanced Fuel Cells
In the AFC TCP, both technology-oriented R&D activities (polymer electrolyte membrane fuel cells, solid oxide fuel cells, electrolysers) as well as analysis to implement fuel cells in commercial applications (stationary and mobile applications) are carried-out. System investigations and modelling complement the activities of this TCP.
Development of miniaturized, ceramic high-temperature fuel-cell-components using resources-perserving mass-production processes
The application of nano scaled powder and powder injection moulding (PIM) for energy efficient co-sintering of miniaturized solid oxid fuel cells which can produce current and heat by using renewable raw materials.
PROMISE - Production with solar energy. Study on the potential of thermal solar energy systems in trade and industry depending on the production processes
Documentation of realized plants for the use of thermal solar energy in trade and industry companies. Identification of production processes and branches, which have a demand for low-temperature heat. Determine the potential of solarthermal systems to provide low-temperature heat. Case studies for branches and processes with the highest mid-term potential for realization of a solar plant.
Raise in efficiency due to optimized waste heat management in heat intensive processes of the metal-working industry
This project drives at optimizing the energy input at the manufacturing process of oil tempered spring steel. This aim is met by investigating different options of waste heat recovery from industrial furnaces and heat insulation of heat treatment bathes. Besides, options of lead removal from anthracite will be listed.
Green Biorefinery - Separation of Lactic Acid from Grass Silage Juice (Brown Juice)
Development of a technical process to separate lactic acid from Brown Juice. Lactic acid is a promising chemical commodity which may be produced from silage juice at low costs and in an environmentally friendly way for subsequent synthesis of valuable products.
Knowledge based determination of plant species
Pollen for medical applications can be sorted by special machines. An integrated database and a spectrometric calibration allow a precise separation of the species with an identification of the plant species.
Shutdown factory - Central control and communication system and overall concept for a reduction of energy cost and optimization of resources during the stand-by-mode of industry facilities
Development of solutions to reduce the energy cost during the stand-by-mode of industry facilities. Focus areas: innovative control and communication system for the problem of the shut down and start up, entire concept on energy savings cost during the stand-by-mode, creating awareness concerning the problem in the industry
EasyCell - Design optimization of PEM fuel cells for reducing auxilliaries and simplificating the material-management to facilitate the mass production
EasyCell - A common use of PEM fuel cells is not yet established. It is the aim of this project to optimize the design of PEM fuel cells (minimization of peripheral units, simplified handling of gases and the right design for mass production) to ease a widespread use of PEM fuel cells.
Development of methods and procedures to automate the operative production control and scheduling considering the aspects of sustainability
The production order doesn't only influence logistic and operational ratios, but also shows effects on the environment as well as ergonomics and the staff's psychology. Aim of the project was to develop a method to optimize the job order planning in consideration of an integrated evaluation in terms of sustainable economic activity.
Waste heat utilisation and use of renewable energy sources in a metal-working enterprise
Use of waste heat and covering of the remaining energy demand by the renewable energy sources hydropower and biomass in a metal-processing company.
Application of the Stirling cycle for environmentally compatible cooling - systems analysis
Conventional cooling has adverse effects on environment (eg. ozone depletion, global warming). One option for environmentally compatible cooling systems for near ambient temperatures (-10 to -50°C) is the Stirling cooler with environmental friendly process.
Homeservices by the company of tomorrow
Sustainable services in co-operation with the housing sector will be investigated, their effects on environment, employment, acceptance by consumers, hindrances as well as prerequisites for sustainable facility management and a new positioning of concierge systems analysed.
Ecologically friendly resin impregnation of rotating machines with the use of the joule effect
Windings of rotating machines or electrical generators (e. g. wind and water power generators) are impregnated with resin. A new technology using the heating effect of current is investigated. The high efficiency of heating with the joule effect results in quick heating of stator leading to fast gelling of the resin, which implies low emission.
Wood-processing employing a superimposition of ultrasonic vibrations
Development of wood-processing techniques employing high-frequency ultrasonic vibrations in terms of applications in the woodworking industry.
Diffusion Of Photovoltaics In Austria
The 200 KW Wide- Range Test Collateral Sociological Research
Forschungsforum
2/1998
Herausgeber: BMVIT
Englisch, 6 Seiten