Suchergebnisse für "Factsheet: Energietechnologien gestalten, die für alle sinnvoll und nutzbar sind"
Wood Plastic Composites - Neue Wertschöpfung aus Holzspänen
Systematische Untersuchung einer neuen Werkstofffamilie, welche aus Abfallstoffen der Holzindustrie, nämlich den Holzspänen, in Verbindung mit geringen Mengen an thermoplastischen Polymeren (Polyolefine, 5-40%) hergestellt werden. Sie haben holzähnlichen Charakter, können aber mit Fertigungstechnologien der Kunststoffindustrie verarbeitet werden.
Entwicklung eines marktfähigen Biopolymers auf Stärkebasis aus östereichischen Rohstoffen
Entwicklung eines thermoplastischen Biopolymers auf Stärkebasis zur Substitution von Massenkunststoffen in Nischenanwendungen. Bildung eines Firmennetzwerkes zur wirtschaftlichen Umsetzung von biologisch abbaubaren Produkten aus nachwachsenden Rohstoffen.
Raise in efficiency due to optimized waste heat management in heat intensive processes of the metal-working industry
This project drives at optimizing the energy input at the manufacturing process of oil tempered spring steel. This aim is met by investigating different options of waste heat recovery from industrial furnaces and heat insulation of heat treatment bathes. Besides, options of lead removal from anthracite will be listed.
Personal Power Plant
The application of PEM fuel cells is limited to certain singular products. The reason for this are the relatively high prices for the components of a PEM fuel cell. It is the aim of this project to fabricate the components of a PEM fuel cell by using mass production technologies such as injection moulding. In sequence this will lead to wide-spread applications of PEM fuel cells (personal-power-plant).
Development of miniaturized, ceramic high-temperature fuel-cell-components using resources-perserving mass-production processes
The application of nano scaled powder and powder injection moulding (PIM) for energy efficient co-sintering of miniaturized solid oxid fuel cells which can produce current and heat by using renewable raw materials.
Wood Plastic Composites - Direktextrusion
Entwicklung einer Holzspänedirektdosierung
Increasing of the resources-efficiency by experimental optimisation of steam production and by reduction of production residues in a metal-processing factory
The project is based on the results of the currently running project "Use of waste heat and renewable energy sources in a metal-processing factory". In this project it was found, that nearly the half of the consumption of natural gas is needed for steam production. Based on calculations already carried out, it is planned to investigate experimentally the possibilities of increasing the resource-efficiency by lowering the steam temperature and by replacing steam by hot water. Further increasing of resource-efficiency shall be achieved by use of internal residues as an additional fuel in a solid fuel furnace.
Transfer of results of the program "Factory of Tomorrow" into the target groups of energy managers and energy consultants
Transfer of results of the program "Factory of Tomorrow" with respect to energy efficiency and increased adoption of renewable energy technologies into the target groups of internal energy managers and external energy consultants. The transfer activities include carrying out a one-day-seminar twice and the preparation of freely available training materials.
New solvents and processes for post-combustion CO2 capture
New and better solvents for CO2 absorption can reduce the costs of Carbon Capture and Storage significantly. Therefore, the ability to absorb CO2 and the vapour - liquid equilibrium curve of different new solvents will be determined in the laboratory and under real operating conditions at a power plant. Furthermore, the achievable CO2 removal efficiency of spray towers will also be investigated for different solvents.
Sustainable energy supply: Production and import of biomass and bio fuels
The project gives an overview of the supply and demand for biofuels specifically dealing with the situation in Europe and that in threshold and developing countries using case studies as examples. Cases: Sweden and France as importing countries in the EU, and Senegal as a (potential) exporting nation.
Das nachhaltige Krankenhaus. Eine wirtschaftsbezogene Grundlagenforschung zur praktischen Erprobung in einem Pilotkrankenhaus.
Aufbauend auf einer Machbarkeitstudie unterstützt ein interdisziplinäres Wissenschaftsteam AkteurInnen aus der Krankenhauspraxis bei der Erprobung der Umsetzung nachhaltiger Entwicklung in einem Pilotspital. Veränderungen in drei Kernbereichen sollen zu bedeutenden Entlastungseffekten führen.
Stoffliche Verwertung der textilen Restfraktion
Verwertung des im Zuge der Aussortierung von brauchbarer Second-hand Bekleidung aus gesammelter Altkleidung anfallende textile Abfall soll einer Wiederverwendung zugeführt werden; Entwicklung von automatisierten, mechanischen Verfahren zu Aufbereitung; Vermeidung von Abfall.
Shutdown factory - Central control and communication system and overall concept for a reduction of energy cost and optimization of resources during the stand-by-mode of industry facilities
Development of solutions to reduce the energy cost during the stand-by-mode of industry facilities. Focus areas: innovative control and communication system for the problem of the shut down and start up, entire concept on energy savings cost during the stand-by-mode, creating awareness concerning the problem in the industry
Phytozid - Application of tansy extract and its ingredients as insecticides against the codling moth
Extraction of insecticidal active substances in pilot plant scale from tansy for field trials against the economically important pest codling moth (Cydia pomonella) as well as approval procedure in order to develop alternative strategies for naturally based plant protection.
Wood Plastic Composites - Development of an extrusion tool
Development of a new generation extrusion tool for a wood plastic composite. This material will be developed in a second project an should show a fiber content of 60 - 85%. Important is a high profile quality as well as a high output to ensure an economical production.
Wood Plastic Composites
EASEYX
Im Rahmen dieses Projektes soll ein Nachhaltigkeits-Index an der Wiener Börse eingeführt werden.
"NAWARO-Peat" - Peat replacement products by regional renewable resources
Possibilities to stop the peat usage in horticulture by using renewable resources and biological wastes which are regional available. Efficient economical as well ecological solutions for the usage of alternatives to peat, development and testing of treatment technologies which are necessary to create such a substrate in laboratory and field scale.
Implementation of a cascaded use of stone-fruit residual-mass - Practice-oriented planning for installing a pilot plant for manufacturing marketable products
NAWARO-CASCADING PILOT has investigated professional biocascading strategies for fruit stone utilization (pits from apricots, peaches, cherries and plums) in order to convert them valuable products (novelties like delicacies, cosmetics and technical abrasives) as well as establishing a practice- oriented network.
Insulation material made of cattail
Development of the production technology for cattail insulating materials. Basis study to the feasibility of a serial production.