Suchergebnisse für "Factsheet: Energietechnologien gestalten, die für alle sinnvoll und nutzbar sind"
IEA IETS Task 21 Decarbonizing industrial systems in a circular economy framework
Energy and CO2 savings through circular economy, especially directly through carbon circularity (CCU), and resource and energy efficiency through industrial symbiosis are two key approaches to decarbonizing industry.
Development of a continuous hydrogen-carbon nanofibers production line
With the development of a hydrogen-carbon nanofiber production in a continuous process carbon nanofibers can be produced in an economic way and at the same time access to environmentally friendly hydrogen is enabled.
Mapping of IEA TCPs
The intention of this project was to visualize the current activities of the IEA Energy Technology Network and to identify possible gaps and overlaps. The mapping includes 185 ongoing tasks and annexes (Status September 2017).
Entwicklung eines marktfähigen Biopolymers auf Stärkebasis aus östereichischen Rohstoffen
Entwicklung eines thermoplastischen Biopolymers auf Stärkebasis zur Substitution von Massenkunststoffen in Nischenanwendungen. Bildung eines Firmennetzwerkes zur wirtschaftlichen Umsetzung von biologisch abbaubaren Produkten aus nachwachsenden Rohstoffen.
Wirkungen der grünen Stadt
Studie zur Abbildung des aktuellen Wissenstands im Bereich städtischer Begrünungsmaßnahmen
LICHTSTRASSE Oststeiermark - Konzeption eines innovativen Dienstleistungsbündels zur Energieeffizienzsteigerung kommunaler Straßenbeleuchtungsanlagen
Erleuchtung oststeirischer Straßen durch bedarfsgerechtes Dienstleistungsbündel: Quick-Checks.Energie-Monitoring.Best-PractiseKatalog.Benchmarking.Exkursionen. Informationen.Schulungen.INFO-Point.Begleitprozess. Steirischer SBL-Kongress. Handbuch. Kostenkalkulator.Contracting.Vorbereitung Musterregion energieeffiziente Straßenbeleuchtung.
EasyCell - Design optimization of PEM fuel cells for reducing auxilliaries and simplificating the material-management to facilitate the mass production
EasyCell - A common use of PEM fuel cells is not yet established. It is the aim of this project to optimize the design of PEM fuel cells (minimization of peripheral units, simplified handling of gases and the right design for mass production) to ease a widespread use of PEM fuel cells.
Wood Plastic Composites - Neue Wertschöpfung aus Holzspänen
Systematische Untersuchung einer neuen Werkstofffamilie, welche aus Abfallstoffen der Holzindustrie, nämlich den Holzspänen, in Verbindung mit geringen Mengen an thermoplastischen Polymeren (Polyolefine, 5-40%) hergestellt werden. Sie haben holzähnlichen Charakter, können aber mit Fertigungstechnologien der Kunststoffindustrie verarbeitet werden.
Raising efficiency by an optimized filters purification system using waste heat in metal industry
Purification and disposal of production effluents in waste water from metal manu¬fakturing processes is of economical and ecological importance for the Joh. Pengg AG. Econamical solutions for optimised purification of the filter textiles and the drying of the filter cake with waste heat have been found.
PROMISE - Production with solar energy. Study on the potential of thermal solar energy systems in trade and industry depending on the production processes
Documentation of realized plants for the use of thermal solar energy in trade and industry companies. Identification of production processes and branches, which have a demand for low-temperature heat. Determine the potential of solarthermal systems to provide low-temperature heat. Case studies for branches and processes with the highest mid-term potential for realization of a solar plant.
IEA IETS Task 15: Industrial Excess Heat Recovery (Phase 4)
Excess heat recovery plays a crucial role in reducing emissions in industry. Through strategic planning and efficient process integration, companies can improve their energy efficiency and significantly reduce their carbon footprint. Task XV facilitates the international exchange of experience and knowledge between different companies. This identifies best practices to promote the implementation of energy-efficient technologies in industry.
IEA-IETS Task 19: Electrification of Industry
The electrification of industry can make a major contribution to CO2 reduction. The aim of the task was a transfer of knowledge between the international and the state levels. Nationally, the aim was to spread and establish the topic of “electrification of industry” through stakeholder involvement. A comparison of electrification based on roadmaps and resources was carried out and, above all, systemic aspects of electrification of industry were analysed.
Recommendations for a consolidated Austrian research in the topic of "Smart Cities"
Based on a clear definition of the topics and focusing on energy relevant aspects the project will provide an overview on the present points of focus in research on "Smart Cities". Furthermore, future research topics will be defined and evaluated, and action plans for political stakeholders will be elaborated in the framework of two expert workshops.
Application of the Stirling cycle for environmentally compatible cooling - systems analysis
Conventional cooling has adverse effects on environment (eg. ozone depletion, global warming). One option for environmentally compatible cooling systems for near ambient temperatures (-10 to -50°C) is the Stirling cooler with environmental friendly process.
Instationarity as a limiting factor for the use of industrial waste heat in heating-networks
Industrial waste heat is predominantly instationary. Thus utilisation of industrial waste heat in district heating systems is constrained. A database and an evaluation methodology were developed to support increased utilisation of this heat source.
Passivhauskindergarten Ziersdorf Phase Errichtung
Errichtung eines Kindergartens in Passivhaus-Technik unter Verwendung von lokal verfügbaren Baustoffen mit der Vorgabe eines streng limitierten Kostenrahmens
Einsatz von thermischen Kühltechnologien zur Nutzung der sommerlichen Bio-Nahwärme: Fallbeispiel Gemeinde Mureck
Optimierte Nutzung der Wärme aus einem Biogas-BHKW in der Gemeinde Mureck durch verbraucherseitige Maßnahmen; das MULTIfunktionale Energiezentrum MUreck auf dem Weg zur thermischen KLImatisierung: Multi-Mukli
Wood Plastic Composites - Direktextrusion
Entwicklung einer Holzspänedirektdosierung
Development and optimization of a parabolic trough solar collector for generation of process heat for industrial processes
Development and optimization of a parabolic trough solar collector for generation of process heat for industrial processes. The operating performance and optimization possibilities of a prototype were evaluated and an improved prototype was tested with respect to its efficiency characteristics as well as in a small-scale application with a realistic load profile.
Raise in efficiency due to optimized waste heat management in heat intensive processes of the metal-working industry
This project drives at optimizing the energy input at the manufacturing process of oil tempered spring steel. This aim is met by investigating different options of waste heat recovery from industrial furnaces and heat insulation of heat treatment bathes. Besides, options of lead removal from anthracite will be listed.