Project Image Pool

There are 447 results.

Terms of use: The pictures on this site originate from the projects in the frame of the programmes City of Tomorrow, Building of Tomorrow and the IEA Research Cooperation. They may be used credited for non-commercial purposes under the Creative Commons License Attribution-NonCommercial (CC BY-NC).

PV Backsheet Repair

Application of repair coating for backsheets with cracks

Cross-section repair coating

Cross-section repair coating

Mindmap of stressors

Mindmap of stressors and adverse effects of PV power plants in cold and snowy climates

Structure and projects in Task 39

IEA Bioenergy Task 39 is structured into three subprograms: Technology and Deployment, System Analysis and Sustainability, and Outreach and Dissemination. During this triennium, six thematic projects are being implemented, as shown in the graphic. The projects and subprograms led by Austria are indicated with the Austrian flag.

FAME samples in laboratory

FAME samples in laboratory

Database on facilities for the production of advanced liquid and gaseous biofuels for transport

Database on facilities for the production of advanced liquid and gaseous biofuels for transport

Membrane distillation test module for flat membranes

Membrane distillation test module for flat membranes in the water and process engineering laboratory at AEE INTEC, Gleisdorf, Austria

Vacuum Membrane Distillation Test Module for Flat Membranes

Vacuum Membrane distillation test module for flat membranes in the water and process engineering laboratory at AEE INTEC, Gleisdorf, Austria

Polyolefin hollow fiber membranes for ammonia recovery

Polyolefin hollow fiber membranes from the research project: SolPol6 for ammonia recovery on a laboratory scale in the water and process engineering laboratory at AEE INTEC, Gleisdorf.

Hollow fiber membrane distillation laboratory test setup

Hollow fiber membrane distillation laboratory test facility in the water and process engineering laboratory at AEE INTEC, Gleisdorf, Austria

Membrane distillation laboratory test setup for flat membranes

Membrane distillation laboratory test facility for flat membranes in the water and process engineering laboratory at AEE INTEC, Gleisdorf, Austria

Heat exchanger for sorption thermal storage

The heat exchanger is built into a containment and the sorption material, small grains of zeolite, is filled between the heat exchanger plates. The total volume of material is about 400 liter. Heat is stored through the adsorption and desorption of water vapour in the zeolite. The water vapour is transported between the plates and collected in a header on top of the containment.

Carnot battery: power-to-heat-to-power system

A Carnot battery (power-to-heat-to-power system) converts electrical energy into thermal energy and stores it for a longer period of time before converting the stored energy back into electrical power. Carnot batteries are used for long-term, seasonal storage of electrical power and also heat, and can therefore contribute to stabilizing the power grid and storing electricity from renewable energy sources.

Demoplants Database

Database on facilities for the production of advanced liquid and gaseous biofuels for transport

Advanced Biofuel Pathways

Principle pathways of advanced biofuels technologies

Fields of Action for non-technical drivers and barries in industrial transformation

The figure summarizes seven identified fields of action forming the core of the work in the IETS Task XXIII.

Kick Off Meeting des IEA ES Task 48 am KTH in Stockholm Oct. 13th 2025

We successfully kicked off Task 48 at KTH Royal Institute of Technology in Stockholm - together with our colleagues from Task 47: Components for Thermal Energy Storage. We are inspired by the energy and expertise everyone brought to the table. Our discussions set a strong foundation for collaboration on advancing thermal energy storage (TES) materials — including phase change materials (PCM), thermochemical materials (TCM), and high-temperature sensible storage. Over the coming months, we’ll work together to develop measurement guidelines for TES materials, compile an overview of innovative TES materials and build a shared, high-quality TES materials database. A big thank you to Saman Nimali Gunasekara and colleagues for hosting and to all participants for their inspiring contributions!

Direct Thermochemical Liquefaction - Overview Task activities

The IEA Bioenergy Task34 addresses several levels with the focus of DTL: Feedstock, DTL technologies, intermediates technologies and potential applications of DTL products.

Stand of the different baterry technologies (IEA 4E EDNA Task on Batteries).

This graphic shows the state of the art of different battery technologies. 14 types are organized according to their state of development. 10 are lithium-based batteries, the other 4 use various chemistry compositions (Zinc or carbon nano-tubes), or use new concepts to increase their capacity.

CEPA Panel application

CEPA® System Demonstrator on the crane with visible thermal layer during mounting on the existing wall. Source: Climate and Energy Fund, Krobath