IEA Tasks & Annexe
There are 247 results.
IEA-DHC Annex TS2: Implementation of Low Temperature District Heating Systems
The potential of alternative heat sources is highest at low system temperatures, but current district heating networks are usually high-temperature systems. The aim of the IEA DHC Annex TS2 is to support the transformation of district heating networks towards lower temperatures (the so-called 4th generation). For this purpose, Annex TS2 forms an international platform that enables an exchange on the topics of technology, system, demonstration and competitiveness.
IEA Wind Energy Systems (Wind TCP)
The mission of the Wind TCP is to stimulate co-operation on wind energy research and development and to provide high quality information and analysis to member governments and commercial sector leaders. The focus lies on technology development and deployment, as well as market and policy instruments.
IEA Solar Heating and Cooling (SHC)
The IEA's Solar Heating and Cooling program has been carrying out joint research activities in the field of solar thermal energy since 1977. The focus is on the active and passive use of solar energy for heating and cooling of buildings, solar district heating and solar heat for industrial applications.
Concentrated Solar Power Technologies - SolarPACES
SolarPACES aims at significantly increasing the share of concentrated solar power (CSP) in the global production of renewable energies. To this end, SolarPACES supports technological development and partnerships for developing CSP through an international network of independent experts. It coordinates and advances solar technology research, by focusing on the next generation of technologies; provides recommendations to policy makers and organises international conferences and workshops. In order to increase the transparency of the market and reduce risks associated with project development, SolarPACES also develops guidelines and standards for CSP industries.
IEA Industrial Energy-Related Technologies and Systems (IETS TCP)
The Industrial Energy-Related Technology Programme (IETS) focuses on energy use in a broad range of industry sectors. It fosters international co-operation amongst relevant research strands, networking within and across industrial sectors, as well as exchange of information and knowledge between experts from industry, science and politics.
IEA Greenhouse Gas R&D Programme (IEA GHG TCP)
Founded in 1991, the remit of the GHG TCP is to evaluate options and assess the progress of carbon capture and storage, and other technologies that can reduce greenhouse gas emissions derived from the use of fossil fuels, biomass and waste. The aim of the TCP is to help accelerate energy technology innovation by ensuring that stakeholders from both the public and private sectors share knowledge, work collaboratively and pool resources to deliver integrated and cost-effective solutions.
IEA Experts Group "R&D Priority Setting and Evaluation" (EGRD). Working period 2020 - 2022
The IEA Experts Group (EGRD) was established by the Committee on Energy Research and Technology (CERT). It examines analytical approaches to energy technologies, policies, and research and development and evaluates the benefits of RTI policies. Its results and recommendations feed into IEA analysis, and enable a broad perspective of energy technology issues.
IEA Energy in Buildings and Communities Programme (EBC TCP)
The Energy in Buildings and Communities Programme by the IEA enables collaborative research and development projects. Thematically, it focuses on integrating energy efficient and sustainable technologies in buildings and communities.
IEA Demand Side Management Energy Efficiency (DSM TCP)
Demand Side Management (DSM) refers to the implementation of energy efficiency improvements and service management measures on the side of end users for optimising energy systems overall. This IEA-research programme pushes development of suitable technologies, applications and methods for end users and thus facilitates their preferential adoption in all political decisions on energy policy.
IEA SHC PVT Task 60: Applications of Photovoltaic/thermal (PVT) Systems and New Fields of Application and Examples of PVT
The international research collaboration IEA SHC Task 60 (Application of PVT Collectors) identified existing applications for PVT technologies and evaluated and highlighted potential system solutions where PVT technology has clear advantages over separate installation of PV modules and solar thermal collectors. In analogy, their advantages and current barriers for a broad market acceptance were highlighted.
IEA 4E: Annex Electric Motor Systems. Working period 2017 - 2019
The goal of the Annex Electric Motor Systems is to raise awareness on the large savings potential in motor systems, while showing the realization method of such a path. After publishing the „Policy Guidelines for Electric Motor Systems“ and recommendations for carrying out energy audits for motor systems based on international standards Austria analysed the impact of industrial automation on electricity consumption and the motor market.
IEA HPT Annex 51: Acoustic Signatures of Heat Pumps
The aim of the project was to increase the acceptance of heat pumps by reducing their noise emissions and vibrations and to reduce market barriers. Using innovative measurement and data analysis methods, influencing factors on the acoustic emissions of heat pump systems and the impact of acoustic protection measures were investigated. The results were prepared in the form of guidelines and recommendations for action.
IEA HPT Annex 43: Fuel Driven Sorption Heat Pumps
The project aimed at investigating the performance and market potential of gas-fired absorption heat pumps (AHPs) in domestic and small commercial or industrial buildings or applications. Selected processes were simulated for various types of buildings in order to calculate the energetic, ecological and economical potential of this technology. The results were compared with monitoring data of a gas-fired AHP system. In addition, a market survey including market barriers for gas-fired AHPs in Austria was conducted and a list of market supporting measures was compiled.
IEA SHC Task 48: Quality Assurance and Support Measures for Solar Cooling
The completed IEA SHC Task 48 focused on an enhanced quality improvement and market-support measures for the technology option ‘solar thermal cooling or air-conditioning'. In cooperation with a total of 22 organizations (12 research institutes, 5 universities and 5 companies) from eight countries numerous useful reports and tools have been created to improve the quality of solar cooling systems with significant contribution of the Austrian partners.
IEA EBC Annex 62: Ventilative Cooling
The main goal of the Annex 62 is to make ventilative cooling an attractive and energy efficient cooling solution to avoid overheating in buildings. Ventilation is already present in buildings through mechanical and/or natural systems and it can remove excess heat gains as well as increase air velocities to widen the thermal comfort range. The results from the Annex facilitate better possibilities for both design purposes and for energy performance calculation.
IEA HPT Annex 49: Design and integration of heat pumps for nZEB
A dominating concept to reach a nearly Zero Energy Building (nZEB) is the combination of solar PV systems and heat pumps. The extended scope of the Annex 49 regards the balance of single buildings and groups of buildings/neighbourhoods, a thorough investigation of heat pump integration options for nZEBs and nZE neighbourhoods by means of monitoring and simulation as well as the design and control optimization for heat pumps in nZEB and the integration into energy systems.
IEA EBC Annex 73: Towards Net Zero Energy Resilient Public Communities
Public buildings such as hospitals and educational institutions often house critical infrastructure that depends on sufficient energy and resource supply. The aim of the annex was to develop tools for the planning process of resilient, efficient and low-emission energy systems for such building clusters.
IEA EBC Annex 71: Building Energy Performance Assessment Based on In-situ Measurements
The requirements on building envelope and on building technology are steadily increasing. There is a lack of measurement and analysis methods to control the quality of the built implementation and to optimize the building operation. This project developed a methodological basis to enable an in-situ evaluation of the actual energy performance and building operation. For this purpose, it investigated methods to generate data-driven building models favouring the use of already available on-board data.
IEA EBC Annex 72: Assessing life cycle related environmental impacts caused by buildings
The construction sector has great potential to reduce its energy consumption and the associated environmental impacts. The IEA EBC Annex 72 therefore focuses on the harmonization of methods for the assessment of construction-specific and operational environmental impacts (primary energy requirements, greenhouse gas emissions and other indicators) throughout the life cycle of buildings.
IEA EBC Annex 75: Cost-effective Building Renovation at District Level Combining Energy Efficiency & Renewables
For the conversion of existing buildings into low(st) energy buildings with low greenhouse gas emissions, it is important to know which strategies are most cost-effective to reduce emissions and primary energy consumption of the buildings. In particular, it is important to find the right balance between energy efficiency measures and renewable energy measures. This question is addressed in this project.