Suchergebnisse für "Factsheet: Energietechnologien gestalten, die für alle sinnvoll und nutzbar sind"
Insulation material made of cattail
Development of the production technology for cattail insulating materials. Basis study to the feasibility of a serial production.
Netzqualität bei dezentraler Stromeinspeisung auf Basis erneuerbarer Energieträger
Durch den Einsatz neuer Technologien integriert in dezentrale Stromerzeugungsanlagen basierend auf erneuerbaren Energieträgern soll demonstriert werden, wie diese aktiv zur Verbesserung der Versorgungsqualität in Netzen beitragen können, um damit den weiteren Ausbau von dezentraler Erzeugung zu unterstützen.
Identification of services, wood and non-wood products in sustainable forest management
The ecological, economic and social effects of services, wood and non-wood products on sustainable forest management, the marketing potential and the relevance of sustainable measures are analysed.
Biomasse-Kraft-Wärme-Kälte-Kopplung auf Altholzbasis (Lustenau)
Thermoölkessel - Rauchgasreinigung - ORC-Prozess - Absorptionskältemaschine
Natural Dyes for the Textile Industry
New cooperations between agriculture und industry are necessary to ensure the utilization of renewable materials. The project´s focus is upon natural dyes and their application in textile industry. The goal of the project is to create a contact institution which connects various suppliers of diverse plant materials, takes on the processing, and standardising of the natural dyes, and makes a product that can be used by the industry.
Wood Plastic Composites - New property profile by refiner fibres
The mechanical properties and thus the application area of wood plastic composites with a wood content > 60 % shall be explicit increased by means of long wood fibres. The realization of a technological direct feeding system in extrusion process will enable an innovation jump of this wood like material.
Maize Cob Board (MCB) - Light weight material from agricultural by-products
Maize cobs accrue as an agricultural by-product can be used for a core material of light weight panels with good material properties and insulation characteristics. The aim was to work out a concept for the production and optimisation of material properties.
PSS-ÖB - Strategies to deal with barriers to the implementation of ecoefficient Product-Service-Systems in Public Procurement
Analysis of factors that support or hinder the implementation of Product-Service-Systems in public procurement, development of strategies to overcome those obstacles and investiga-tion and documentation of available Good-Practice-Examples.
Characterisation of material parameters as basis for innovative processing methods and products made of large dimensioned wood aiming at economically sustainable use of Austrian timber resources "XXL-Wood"
Facing the problem of decreasing demand for large dimensioned timber, investigations are carried out concerning certain properties like strength and fibre characteristics. Due to the data it is possible to create a model about the variability of special properties of a stem. Based on the model new concepts for optimised processing and products will be developed.
IEA DSM Task 17: Integration of Demand Side Management, Distributed Generation, Renewable Energy Sources and Energy Storages
The main objective of the proposed Task is to study how to achieve the optimal integration of distributed generation, energy storages and flexible demand, and thus increase the value of distributed generation and demand response and decrease problems caused by intermittent distributed generation (mainly based on RES) in the physical electricity systems and at the electricity market. The Task deals with distributed energy resources both at local (distribution network and customer) level and at transmission system level where large wind farms are connected.
THERM-opti-BALKON-P2 - Thermisch optimierte Balkonsanierung Phase 2: In-Situ-Versuchsanlage
Bei der thermischen Sanierung von Gebäuden stellen frei auskragende Balkone ein besonderes Problem dar. Mit dem THERM-opti-BALKON-System wird derzeit unter Laborbedingungen ein diesbezüglicher Lösungsansatz erforscht. Phase 2 soll eine In-Situ-Versuchsanlage unter realen Bedingungen als Technologiedemonstrator schaffen. Wichtigster Untersuchungsgegenstand ist das Langzeitverhalten des THERM-opti-BALKON-Systems.
The Paper Factory in the Year 2030
Paper factory in the year 2030 as an integrated part of a sustainable economy and a supplier of sustainable paper products fulfilling criteria for sustainability at highest possible level.
Passivhaus Auleiten (Neuhofen, Oberösterreich)
Flachgedecktes Passivhaus in engparzellierter Siedlungsstruktur
Bio bitumen - bitumen substitute based on renewable raw materials and resulting in energy efficient asphalt
Development of a binder for asphalt based on renewable raw materials. Studies to choose the ideal natural base product, regarding the aspect of utilization of remaining material and the elaboration of practical methods of synthesis were made.
Colors of Nature - vegetable dyes in practice
By means of optimization of the production of vegetable dyes and dyeing technology, the vegetable dyestuff "Colors of Nature" will achieve market maturity. In co-operation with farmers and companies of the textile, food processing and wood working industry there has been developed a competitive product throughout the value chain, which will not only yield an ecological advantage, but also generate regional creation of value.
New market potential for Wood Plastic Composites by applications for injection moulding
Wood Plastic Composites (WPC) should gain new market potential and create new value via applications in injection moulding. Therefore it is necessary to develop a formulation suitable for injection moulding to access the existing market potential.
Highlights of Factory of Tomorrow, presented on www.nawaro.com
Dissemination of the subprogram Factory of tomorrow's highlights in the field of biopolymer, composites and building material on www.nawaro.com (Information pool for biological materials). Additional current information about biological materials in articles on-line. Networking of relevant companies with the help of a cooperation forum and a database.
Improvement of resource efficient use of wood
Modelling of wood processing in order to demonstrate the developments' impacts on performance
Open Innovation
Instruments and Strategies for the involvement of users and other relevant social groups in the design process: the example of fuel cell technology in end-user markets and wood-plastic composites.
Dampf-Schraubenmotor-BHKW (Hartberg/A)
In Hartberg wurde ein bestehendes Biomasse-Fernheizwerk mit einem Dampf-Schraubenmotor zu einer KWK-Anlage erweitert.