Suchergebnisse für "Factsheet: Energietechnologien gestalten, die für alle sinnvoll und nutzbar sind"
Wood Plastic Composites - Direktextrusion
Entwicklung einer Holzspänedirektdosierung
Passivhauskindergarten Ziersdorf Phase Errichtung
Errichtung eines Kindergartens in Passivhaus-Technik unter Verwendung von lokal verfügbaren Baustoffen mit der Vorgabe eines streng limitierten Kostenrahmens
IEA-IETS Annex 15: Industrial Excess Heat Recover (Phase 2)
In the framework of IEA IETS Annex 15 potentials of excess heat and technologies for their integration were collected from national research projects, bundled and elaborated on. This way, a broad knowledge base was built on experience gained in carrying out surveys for potential use of excess heat. Experiences with questionnaires, process integration tools and extrapolation of data using existing knowledge about the respective energy systems were exchanged. A process database with detailed process information could also be established, which can be used for further research activities. Also, in the area of policy instruments, recommendations for future measures to increase the use of surplus heat were derived on the basis of national contributions.
Einsatz von thermischen Kühltechnologien zur Nutzung der sommerlichen Bio-Nahwärme: Fallbeispiel Gemeinde Mureck
Optimierte Nutzung der Wärme aus einem Biogas-BHKW in der Gemeinde Mureck durch verbraucherseitige Maßnahmen; das MULTIfunktionale Energiezentrum MUreck auf dem Weg zur thermischen KLImatisierung: Multi-Mukli
Increasing of the resources-efficiency by experimental optimisation of steam production and by reduction of production residues in a metal-processing factory
The project is based on the results of the currently running project "Use of waste heat and renewable energy sources in a metal-processing factory". In this project it was found, that nearly the half of the consumption of natural gas is needed for steam production. Based on calculations already carried out, it is planned to investigate experimentally the possibilities of increasing the resource-efficiency by lowering the steam temperature and by replacing steam by hot water. Further increasing of resource-efficiency shall be achieved by use of internal residues as an additional fuel in a solid fuel furnace.
Das nachhaltige Krankenhaus. Eine wirtschaftsbezogene Grundlagenforschung zur praktischen Erprobung in einem Pilotkrankenhaus.
Aufbauend auf einer Machbarkeitstudie unterstützt ein interdisziplinäres Wissenschaftsteam AkteurInnen aus der Krankenhauspraxis bei der Erprobung der Umsetzung nachhaltiger Entwicklung in einem Pilotspital. Veränderungen in drei Kernbereichen sollen zu bedeutenden Entlastungseffekten führen.
Transfer of results of the program "Factory of Tomorrow" into the target groups of energy managers and energy consultants
Transfer of results of the program "Factory of Tomorrow" with respect to energy efficiency and increased adoption of renewable energy technologies into the target groups of internal energy managers and external energy consultants. The transfer activities include carrying out a one-day-seminar twice and the preparation of freely available training materials.
New solvents and processes for post-combustion CO2 capture
New and better solvents for CO2 absorption can reduce the costs of Carbon Capture and Storage significantly. Therefore, the ability to absorb CO2 and the vapour - liquid equilibrium curve of different new solvents will be determined in the laboratory and under real operating conditions at a power plant. Furthermore, the achievable CO2 removal efficiency of spray towers will also be investigated for different solvents.
Stoffliche Verwertung der textilen Restfraktion
Verwertung des im Zuge der Aussortierung von brauchbarer Second-hand Bekleidung aus gesammelter Altkleidung anfallende textile Abfall soll einer Wiederverwendung zugeführt werden; Entwicklung von automatisierten, mechanischen Verfahren zu Aufbereitung; Vermeidung von Abfall.
Sustainable energy supply: Production and import of biomass and bio fuels
The project gives an overview of the supply and demand for biofuels specifically dealing with the situation in Europe and that in threshold and developing countries using case studies as examples. Cases: Sweden and France as importing countries in the EU, and Senegal as a (potential) exporting nation.
IEA IETS Annex 18: Digitalization, artificial intelligence and related technologies for energy efficiency and reduction of GHG emissions in industry (Working period 2020 - 2023)
The work in Task 18 enables the exchange of experience and knowledge between industry and research institutions from different countries. Through this cooperation best practices are identified and disseminated to promote the implementation of energy-efficient technologies in industry. In the medium and long-term, this contributes to reduce energy consumption and greenhouse gas emissions of industry.
Holzgasbetriebene Mikrogasturbine
IEA IETS Task 18: Digitalization, Artificial Intelligence and Related Technologies for Energy Efficiency and GHG Emissions Reduction in Industry (Working period 2023 - 2024)
The work in Task 18 enables the exchange of experience and knowledge between industry and research institutions from different countries. Through this cooperation best practices are identified and disseminated to promote the implementation of energy-efficient technologies in industry. In the medium and long-term, this contributes to reduce energy consumption and greenhouse gas emissions of industry.
Multifunctional Energy Centre Kötschach-Mauthen - model-system to achieve energy-self-sufficiency
Development of concepts for a multifunctional Energy Centre (biomass district heating und biogas polygeneration for the supply of heat, electricity, process heat, cooling and biofuels) and for a "Öko-Energietourismus" for the community of Kötschach-Mauthen on the way to energy-self-sufficiency
Gründerzeit mit Zukunft - Demonstrationsprojekt 1: David´s Corner
Energetisch hochwertige Sanierung von drei benachbarten gründerzeitlichen Wohnhäusern in ertragsschwacher Lage.
Filmarchiv Austria
Errichtung eines Nitrofilmdepots mit optimierter Nutzung erneuerbarer Energien
ProKlim - Prognosegesteuerte Gebäudeklimatisierung
Energieeffizienzsteigerung in der automatisierten Gebäudeklimatisierung durch wetterprognoseunterstützte Regelung
Shutdown factory - Central control and communication system and overall concept for a reduction of energy cost and optimization of resources during the stand-by-mode of industry facilities
Development of solutions to reduce the energy cost during the stand-by-mode of industry facilities. Focus areas: innovative control and communication system for the problem of the shut down and start up, entire concept on energy savings cost during the stand-by-mode, creating awareness concerning the problem in the industry
Entwicklung eines Passivhaus-Vollholzfensters
Auf Basis der Erfahrungen mit Niedrigenergiefenstern wird ein Passivhausfenster aus Vollholz entwickelt
Development of a solid-wood-passivehouse-window
Based on experience with low-energy-windows, a solid wood window is being developed, which meets passivehouse-standards.