Suchergebnisse
Additive Fertigung (3D-Druck) von komplexen Metall- und Keramikteilen (FlexiFactory3Dp)
Das Ziel dieses Projektes ist die Entwicklung eines nachhaltigen, robusten und flexiblen Produktionsprozesses für komplexe metallische und keramische Bauteile. Zwei Fallbeispiele werden untersucht: ein Bauteil aus dem Automobilbereich und ein monolithischer Katalysator für die Luftreinigung.
Stereolithographie-Materialien, Produktion und Plasma-Nachbearbeitung für langlebige Automobilanwendungen (SYMPA)
Im Projekt entwickelt ein deutsch-österreichisches Konsortium nachhaltige Materialien, Prozesse und Nachbehandlungsverfahren für den 3D-Druck (Stereolithografie) für den dauerhaften Einsatz in Automobilanwendungen. Im Fokus liegen neue Polymermaterialien, Anlagenentwicklung, Steigerung der Steifigkeiten, Festigkeiten, UV-Stabilität, Verschleißreduktion und verkürzte Prozesszeiten.
3D-gedrucktes Elfenbein als nachhaltiger Werkstoff für die Restaurierung von Kunstobjekten
Natürliches Elfenbein ist aufgrund ethischer Bedenken sowie strenger Einschränkungen im Handel ein Werkstoff, der für die Restaurierung und Erhaltung von Kunstobjekten immer weniger zur Verfügung steht. Durch Einsatz von lithographiebasierter Fertigung in Kombination mit geeigneten keramikgefüllten Photopolymeren stellt das Konsortium von Elfenbein3D ein künstliches Ersatzmaterial her.
Leitprojekt „addmanu“ -Stärkung der österreichischen Wertschöpfungsketten für generative Fertigung in der industriellen Produktion
Das Leitprojekts addmanu konzentrierte sich auf die Erforschung und die Weiterentwicklung der additiven Fertigung (AM) zur Etablierung einer High-Tech-Technologie für kleine Losgrößen und komplexen Geometrie mit dem Ziel Stärkung der Innovationskraft in Österreich. Forschungsthemen spannten sich umfassend über die gesamten Wertschöpfungsketten von AM und trugen zur Bildung eines nationalen Forschungscluster bei.
Additive Manufacturing of Continuous Fibre Reinforced Polymers for Structural Applications (3D-CFRP)
Strategische Ziele sind die Entwicklung von neuen Materialien und Technologien für hochbelastbare Bauteile aus endlosfaserverstärkten Kunststoffverbunden im FFF (Fused Filament Fabrication)-Verfahren. Dies soll die Realisierung 3D-gedruckter Composite-Bauteile als hocheffiziente Alternative für klassisch hergestellte CFRP-Komponenten in Luft- und Raumfahrt, Automotive, Wind Energie, etc. ermöglichen.
Untersuchung der nachhaltigen Verwertung von Kohlenstoff aus der Methanpyrolyse
Eine der möglichen alternativen Produktionsrouten für erneuerbaren Wasserstoff ist die Methanpyrolyse. Gegenüber anderen, alternativen Erzeugungswegen weist die Methanpyrolyse bei einer sehr hohen Wasserstoffausbeute den geringsten Energieaufwand (weniger als ein Viertel der Wasserelektrolyse) auf.
Pflanzenkläranlagen für die Kreislaufschließung und Reinigung industrieller Prozesswässer
Maßnahmen zur Reduktion von Wasserverbrauch und Abwasser in Industrie und Gewerbe, Technologien zur selektiven Entfernung von Wert- und Abfallstoffen aus dem Abwasser, Fallstudien in Unternehmen kleiner und mittlerer Größe der Lebensmittelbranche
Energiezentrale zur Umwandlung von biogenen Roh- und Reststoffen einer Region in Wärme, Strom, Substitute Natural Gas und flüssige Kraftstoffe
Das Projekt befasst sich mit der Erzeugung eines Synthesegases aus reginonal anfallenden biogenen Roh- und Reststoffen mittels Wasserdampfvergasung. Dieses Gas wird zur Polygeneration benutzt und zwar zur gleichzeitigen Strom- und Wärmeerzeugung, zur Erzeugung von gasförmigen Energieträger (Substitute Natural Gas, SNG) und/oder flüssigen Brenn- oder Kraftstoffen.
Produktion alternativer Treibstoffe, Wärme, Strom & nichtenergetische Produkte - Optimierung der Gesamtenergiebilanz sowie der Materialflüsse
Produktion von Bioethanol in Bruck/Leitha im Umfeld der Produktion von Wärme, Strom und verwertbarer Reststoffe aus Biomasse, wobei die Abwärme- und Niedertemperatur¬wärmenutzung und die Stoffstromführung (Rohstoffe und Produkte) mittels eines neu entwickelten Simulationstools optimiert werden.
CellPor - Cellulose Polymerisiert - Neue Methoden zur Verarbeitung eines Polymer-Celluloseschaums nach bauökologischen Kriterien
Die Entwicklung von aufspritzbaren Zellulose-Verbunden als Dämmstoff auf Basis nachwachsender Rohstoffe, sowie die Entwicklung eines Prototypen zur Verarbeitung dieses neuartigen (weil wasserfreien) Zellulose-Verbundes sind die Herausforderungen im Projekt CellPor.
Phytozid - Application of tansy extract and its ingredients as insecticides against the codling moth
Extraction of insecticidal active substances in pilot plant scale from tansy for field trials against the economically important pest codling moth (Cydia pomonella) as well as approval procedure in order to develop alternative strategies for naturally based plant protection.
Implementation of a cascaded use of stone-fruit residual-mass - Practice-oriented planning for installing a pilot plant for manufacturing marketable products
NAWARO-CASCADING PILOT has investigated professional biocascading strategies for fruit stone utilization (pits from apricots, peaches, cherries and plums) in order to convert them valuable products (novelties like delicacies, cosmetics and technical abrasives) as well as establishing a practice- oriented network.
Development of low emission cleaning processes for metal surfaces considering manufacturing processes within the automotive industry
Development of technological optimisation of cleaning processes within the automotive industry which guarantee defined cleaning requirements and fulfil the criteria of a sustainable process design with near zero emissions.
Innovative technology for the treatment of municipal and industrial waste water and process waters (INNOWATEC)
Evaluation of a technology as a supporting module for process water and waste water treatment and testing in laboratory and pilot tests for specific fields of application in operational water management.
Green Biorefinery - Development of key separation technologies to extract lactic acid and other valuable substances from silage juice
Juice from pressed silage grass has a high content of lactate and free amino acids. The goal of this project is to develop a technology for the separation of these valuable products.
Pilot machine for the production of lightweight sandwich-elements in batch mode consisting only of one polymer component.
Further development of a new technology for the production of lightweight sandwich-elements consisting only of one polymer component (for example polypropylene). This pilot machine is the basis to get all the necessary figures and experience for the development of the production machine and to produce the first parts of the car bodies for the zero series.
Processing of filter residues of the beer - brewing process for the production of an innovative pharmaceutical substance
The latest technology for the filtration of beer is the use of ion exchangers. The reclaim contains high-potent substances (vitamins and minerals from the yeast, hops and other proteins) in concentrated form which should be processed and characterised. In a further step this substance should be the main ingredient of a food supplement. After a technical adaptation this concept can be used within other ranges of the food and natural substance industry.
Adsorbent Materials of Residues from Corn Cob
Development and testing of processes to produce adsorptive materials from agricultural residues of corn production with focus on corn cob grit as oil bonding agent (e.g., applicable to the remediation of oil spills).
Raising efficiency by an optimized filters purification system using waste heat in metal industry
Purification and disposal of production effluents in waste water from metal manu¬fakturing processes is of economical and ecological importance for the Joh. Pengg AG. Econamical solutions for optimised purification of the filter textiles and the drying of the filter cake with waste heat have been found.
Natural Dyes for the Textile Industry
New cooperations between agriculture und industry are necessary to ensure the utilization of renewable materials. The project´s focus is upon natural dyes and their application in textile industry. The goal of the project is to create a contact institution which connects various suppliers of diverse plant materials, takes on the processing, and standardising of the natural dyes, and makes a product that can be used by the industry.