Suchergebnisse für "Factsheet: Energietechnologien gestalten, die für alle sinnvoll und nutzbar sind"
User-friendly heating and ventilation systems for low energy and passivehouses
The goal of the research project is the evaluation of different heating and ventilation systems for passive- and low energy multi family and office buildings taking into account indoor climate, possible variation of user behaviour, final and primary energy demand, costs, space demand and fail save installation and operation.
Photonic Cooling – Efficient cooling of buildings through the use of photonic
Within the scope of the project a photonic cooling approach was investigated and evaluated in terms of feasibility and cost efficiency for building applications. In particular cost-efficient photonic surfaces and concepts were investigated which need to have a high reflectivity in of the incident solar radiation (>97%) and a high emission coefficient within the spectral range of 8 – 13 micrometer in order to enable the emission of heat into the sky.
SUPROMED: Reprocessing and Reuse of Single Use Medical Devices in the Light of Sustainable Development Criteria - Implementation in Austria
In contrast to other countries there is currently no reprocessing and reuse of single use medical devices in Austria. Thus the potential for major ecological and economical savings remains unused. In a stakeholder dialogue, practical implementation strategies were developed to change the trend towards a sustainable value-added chain.
Building as living lab - Buildings as a living lab for climate-neutral, needs-based and affordable housing
Within ÖWG, climate protection and sustainability are strategically anchored in renovation and densification projects. A comprehensive, climate-neutral renovation concept had been developed for a specific pilot property in Graz in an open, co-creative innovation process. The building becomes a living lab in which new solutions are tested in the everyday lives of the residents.
DAKTRis - Dynamic operational behaviour of absorption chillers in Trigeneration Systems
In the present project an absorption chiller will be adapted to meet the specific requirements necessary to integrate it with the CHP unit. By means of hardware-in-the-loop measurements and dynamic system simulations, different system configurations and control strategies will be analysed under dynamic boundary conditions, optimized and evaluated.
IEA HPT Task 41: Cold Climate Heat Pumps
The aim was to increase the efficiency of outdoor air heat pumps in cold climates in locations with low outside temperatures of up to -25°C. Newly developed heat exchanger concepts were tested and optimized regarding their icing behaviour. Different circuit modifications were modelled and simulation studies for low ambient temperatures were carried out.
DiRecT – Direct recycling and upcycling of titanium chips
In the project DiRecT, different new technologies will be developed and evaluated which make it possible to directly recycle the chips generated in the manufacturing process of high-quality titanium products or to produce directly from the chips near-net-shape components or improved semi-finished products (upcycling).
Intensified Density - a small scale densification strategy for the suburbs by using modular construction
The project investigated whether a small scale densification strategy for the suburbs / intermediary cities, using modular construction, and existing infrastructure on empty plots of land, can offer a competing alternative to not only the sprawl of single family dwellings but also to large projects.
SAVE circular approaches for green buildings!
The project demonstrates the cycle and use of synergies in an ARWAG residential building from the extraction of valuable raw materials through a urine treatment plant (fertilizer) using energy recovery measures (heat recovery, heat pump, photovoltaics) to the use of the fertilizer for the generously designed greening measures and the associated effects on the microclimate.
Reduction of maintenance costs of ventilation systems in plus energy buildings
Maintenance costs for central air ventilation systems are approximately 0,42 Euro/m².a excluding VAT, for decentralized systems 1,16 Euro/m².a excluding VAT. 50% savings in operating costs of apartment passive houses opposed to apartment low-energy buildings [SCH11] can be achieved with maintenance costs of around 0,42 Euro/m².a.
Operational and maintenance costs in passive houses and low energy houses
How much energy does a passive house actually save? Does a passive house pay-off by itself? What are the costs for maintancence? For the first time an approximation for the running costs of a passive house were systematically documented and compared.
ECR Energy City Graz - subproject 2: Framework-Plan Energy City Graz-Reininghaus
Main project-issue is the scientific work and the demonstration of the vision of the energy self-sufficient, CO2-neutral city-district Graz-Reininghaus. The Framework-Plan Energy City Graz-Reininghaus shall stimulate an awareness-raising process towards energy-efficient and sustainable city-development.
Development of a strategy for industrialized serial production of ecological passive houses made out of renewable resources
Development of a strategy for industrialized seria. production of ecological passive solar houses made out of building materials based on renewable resources as foundation for the dissemination of sustainable solutions for the production of prefabricated houses and of single houses.
EPIKUR – Energy efficiency potential of intelligent measures of urban densification
The present research proposal focused on the possibility, implications and consequences of "inwards urban expansion" through densification of the existing urban tissue. In this context, densification is not only approached through known and common aspects of building regulations and guidelines, but in view of what is actually possible to achieve.
mAIntenance - Investigation of AI supported maintenance and energy management
Optimized & reliable operation of Heating, Ventilation and Air Conditioning (HVAC) systems in terms of maintenance and energy management, using predictive, data-based & self-learning error detection. Conceptual design and prototype implementation of an AI (Artificial Intelligence) tool for automated data analysis and recommendations for technical building operators.
MISSION KS 30 - Mission Klagenfurt climate-neutral and smart until 2030
Updating the Smart City Strategy (SCS) of Klagenfurt to achieve climate neutrality by 2030 and adapting the indicators to the Sustainable Development Goals (SDGs) of the UN. Fulfilling the participation requirements for the urban mission of Horizon Europe "100 Climate-neutral Cities by 2030".
NETSE - User orientated development of technologies and services for energy communities
In the NETSE project the basics for the implementation of energy communities are developed. This includes the relevant technical equipment and interfaces, the development of a platform for the operation of an energy community as well as tools for the optimization of the technical setup and the operation of energy communities.
smart façade - energy potential of adaptive façade systems
A specially developed simulation model is employed to ascertain the energetic potential of adaptive façade systems. The dynamic behavior of the physical properties of the adaptive façade system reacts to both internal and external changing conditions. The goal was the development of an adaptive façade, which helps provide maximum comfort for the building occupants with minimum energy consumption.
SonnWende+ Efficient solutions for photovoltaic energy management based on block chain technology
The project deals with the analysis of Blockchain technology in the context of renewable electricity producers and flexibility as enabler for innovative service concepts, tested in the innovation-lab “Energie Innovation Cluster Südburgenland”. The goal is to find new and efficient Blockchain-based solutions for services in energy management and trading in a local level.
CO2-Demobau - Exploration of the feasibility of carbon-neutral model construction sites
By highlighting green innovations, networking with stakeholders in the construction industry and applying the findings of the previous study "CO2 neutrale Baustelle", the foundation is set for future carbon-neutral model construction sites. These construction sites will serve as best-practice examples in the fields of contracting, construction operations organization and technology.