Suchergebnisse für "Factsheet: Energietechnologien gestalten, die für alle sinnvoll und nutzbar sind"
TANZ - Exploration of a regional living lab: Tourism as an opportunity for the energy transition in Pinzgau
Exploration for a regional living lab to accelerate Austria's climate neutrality in 2040 in the tourism region of Pinzgau. Based on numerous preliminary works, model solutions (“Realtests”) for the innovation fields of sector coupling, energy communities and sustainable heating solutions were designed, the organisational structure of the living lab is developed and stakeholders were actively involved.
Certified passive attic conversion of a typical building from the period around 1900
Conversion of an attic of a typical building from the period about 1900 to a passive attic with photovoltaic system and renovation of the existing building equipment. The aim is to keep the additional construction costs under 10 %, to avoid overheating in summer and to make possible a reproduction for the large amount of buildings from the same period.
aspern Vienna´s Urban Lakeside - subproject 1: Public Space and Micro Climate: Basics for climate sensitive planning in Aspern
The Project will derive planning examples and recommendations in order to optimize the building performance as well as outdoor amenity. The study will be based on a climate prognosis of the aspern area and compare different reference examples of construction and open space design.
Build to satisfy: Modeling of user behavior in lowest and plus energy buildings: Consequences for building and comfort
Aim of the project was a better understanding and modeling of effects of user behavior on energy performance in office and service buildings, built with lowest energy building and plus-energy building techniques. The results support facility managers of office/service buildings and integrate gender and diversity issues.
Hemp Ski, Recyclable ski manufacturing from hemp, bio-resin and waste streams
In industrial production for alpine skis, epoxy resins of fossil origin and pre-impregnated glass fiber reinforcements are processed today. Innovations that replace environmentally critical materials in skis with biogenic substitute materials with an improved environmental balance have so far been limited to the production of small series. This circumstance motivated the consortium to develop a solution for a circular bioeconomy with the HempSki project, which will also make industrial ski production from renewable raw materials and waste streams possible in the future.
Excursions "Building of Tomorrow live"
Under the project "Building of tomorrow live" over a year long several excursions to "Building of tomorrow" demonstration projects and other passive houses were organised. Sightseeing opportunities were surveyed, updated several times and published on the web.
Transferproject: Professional strawbale building - "Virtual building-site", exhibition and instruction material
Strawbale-workshops are considered as the best way to inseminate this ecological building-technique. The "virtual building site" has some decisive advantages over the common situation: it does not depend on the weather, allows the comparative study of different constructing methods and can, as a permanent installation, be used as an exhibition.
InnoGOK – Investigation of the energetic and ecological usability of solar radiation on urban spaces and paths
Examination of the suitability of street space or other paved or not paved surfaces in urban areas for promoting renewable heat from solar radiation. Thus offers a high potential for increasing energy efficiency and conserving resources in urban contexts. Besides, the dissipation of heat from large solar-heated surfaces promises to prevent urban heat islands.
PRoBateS - Potentials of planning and building legislation for energetically sustainable city structures
The aims of this project are to analyse planning and building legislation in order to identify barriers, potentials and suitable courses of action for energy-orientated policy measures. Specific policy recommendations are developed with a view to increasing the sustainability of energy-related city structures. For these purposes the project combines two different disciplinary approaches: a thorough legal analysis and a spatial structure and quantitative impact assessment.
Stakeholder process of the initiative "Reference architecture for secure Smart Grids in Austria"
The project worked out the development of a smart grids reference architecture for Austria under involvement of all actors. Based on technological-scientific elements a process which met the requirements of stakeholders like operators of infrastructure, industry and also public agencies had been worked out to achieve nationally accepted and internationally orientated reference architecture.
ReCon: Development of a resilient hook-and-loop-fastening-system for the adaptable assembly of building components in the building industry
Systemic examination of the hook-and-loop fastener and building component interfaces for the development of a resilient fastening system between parts/components with different functions and lifespan. The desired result serves to verify the fastening system and forms a basis for further research and establishment in the building industry.
Pallets never pall - Development of the Pallet House to series-production readiness
The winning project "Pallet House" of the EU-wide competition GAU:DI in 2007 consists of 800 (used) pallets. It has been exhibited in a scale 1:1 at the Biennale in Venice 2008 and has been developed for mass production within this project. Therefore, two exemplary scenarios were developed: (temporary) construction at Vienna's Urban Lakeside in Aspern and the construction of a low-cost building in South Africa.
Photonic Cooling – Efficient cooling of buildings through the use of photonic
Within the scope of the project a photonic cooling approach was investigated and evaluated in terms of feasibility and cost efficiency for building applications. In particular cost-efficient photonic surfaces and concepts were investigated which need to have a high reflectivity in of the incident solar radiation (>97%) and a high emission coefficient within the spectral range of 8 – 13 micrometer in order to enable the emission of heat into the sky.
SUPROMED: Reprocessing and Reuse of Single Use Medical Devices in the Light of Sustainable Development Criteria - Implementation in Austria
In contrast to other countries there is currently no reprocessing and reuse of single use medical devices in Austria. Thus the potential for major ecological and economical savings remains unused. In a stakeholder dialogue, practical implementation strategies were developed to change the trend towards a sustainable value-added chain.
User-friendly heating and ventilation systems for low energy and passivehouses
![](/includes/images/pdf-placeholder.png)
The goal of the research project is the evaluation of different heating and ventilation systems for passive- and low energy multi family and office buildings taking into account indoor climate, possible variation of user behaviour, final and primary energy demand, costs, space demand and fail save installation and operation.
SYSPEQ - Systemische Lösung zum Betrieb von Plusenergiequartieren
Full-scale planning concepts for positive energy districts (PEDs) and their operation as energy communities (ECs). The focus is on the implementation in the existing building stock, especially in the area of social/non-profit housing. Financing options for renewable generation units, planning and operation of a PED (especially as an EC), marketing opportunities for surplus electricity and the development of an information and networking platform are part of this project. A special highlight is the practical proof-of-concept in Fuchsenloch, which is a social housing quarter of Sozialbau.
Energy-Sponge-Bruck (Energieschwamm Bruck an der Mur)
The aim of the exploration-study for the urban region Bruck/Oberaich "Energieschwamm Bruck" or "Energy-Sponge-Bruck" was to establish clear and stringent basics for a flexible development of the future energy system. Therefore an energy development concept as well as a cadaster for short-term implementation measures had been applied. The structured, Bruck-based approach acts as framework for a general energy-conception-method, valid for small and medium urban regions with 10,000 to 20,000 inhabitants.
IEA ISGAN Annex 3: Benefit/Cost Analyses and Tools of Smart Grids
Together with experts from 11 countries, the EI-JKU has analysed cost-benefit models and developed proposals for their adaptation and further development. In the course of the work, the EI-JKU dealt in particular with two questions: how such an evaluation model can be adapted to Austrian conditions and which socio-economic factors influence the question of whether an end consumer emerges as a winner or loser from Smart Grid-based functionalities.
IEA ISGAN Annex 5: Smart Grids International Research Facility Network (SIRFN). (Working period 2019-2021)
The Smart Grids International Research Facility Network (SIRFN) aims at improving the implementation of Smart Grids technologies by collaboration between smart grid testing facilities, test beds, and large-scale demonstrations. The focus during the working period 2019-2020 was laid on the implementation of extended interoperability tests and innovative laboratory testing methods for decentralised energy resources. By active participation, Austria’s position and leading role on the forefront of international Smart Grids development was strengthened.
ThinkHome: Improved energy efficiency based on artificial intelligence in future homes
ThinkHome is a networked controlled home of the future with the ultimate goal to optimise energy efficiency and user comfort at the same time. On this way, smart interaction between all building services is of utmost importance. Goals of this project include the definition of a comprehensive knowledge base that holds all relevant building data, the evaluation of control strategies based on artificial intelligence and machine learning, as well as agent based software engineering.