Suchergebnisse für "Factsheet: Energietechnologien gestalten, die für alle sinnvoll und nutzbar sind"

Fabrik der Zukunft

EasyCell - Design optimization of PEM fuel cells for reducing auxilliaries and simplificating the material-management to facilitate the mass production

EasyCell - A common use of PEM fuel cells is not yet established. It is the aim of this project to optimize the design of PEM fuel cells (minimization of peripheral units, simplified handling of gases and the right design for mass production) to ease a widespread use of PEM fuel cells.

Fabrik der Zukunft

Raising efficiency by an optimized filters purification system using waste heat in metal industry

Purification and disposal of production effluents in waste water from metal manu¬fakturing processes is of economical and ecological importance for the Joh. Pengg AG. Econamical solutions for optimised purification of the filter textiles and the drying of the filter cake with waste heat have been found.

Internationale Energieagentur (IEA)

IEA IETS Task 15: Industrial Excess Heat Recovery (Phase 4)

Excess heat recovery plays a crucial role in reducing emissions in industry. Through strategic planning and efficient process integration, companies can improve their energy efficiency and significantly reduce their carbon footprint. Task XV facilitates the international exchange of experience and knowledge between different companies. This identifies best practices to promote the implementation of energy-efficient technologies in industry.

Nachhaltig Wirtschaften

PROMISE - Production with solar energy. Study on the potential of thermal solar energy systems in trade and industry depending on the production processes

Documentation of realized plants for the use of thermal solar energy in trade and industry companies. Identification of production processes and branches, which have a demand for low-temperature heat. Determine the potential of solarthermal systems to provide low-temperature heat. Case studies for branches and processes with the highest mid-term potential for realization of a solar plant.

Internationale Energieagentur (IEA)

IEA PVPS Task 15 - Bauwerksintegrierte Photovoltaik (Arbeitsperiode 2015 - 2019)

Bauwerksintegrierte Photovoltaik (BIPV) ist eines der Zukunftsfelder in der Photovoltaik, welches Energietechnik und Architektur zu einem Element zusammenführt. Das Projekt fokussierte sich auf zusätzliche nationale Forschung im Bereich der BIPV, um neue Geschäftsfelder zu identifizieren oder Ansätze zur internationalen BIPV Standardisierung zu entwickeln.

Internationale Energieagentur (IEA)

IEA-IETS Task 19: Electrification of Industry

The electrification of industry can make a major contribution to CO2 reduction. The aim of the task was a transfer of knowledge between the international and the state levels. Nationally, the aim was to spread and establish the topic of “electrification of industry” through stakeholder involvement. A comparison of electrification based on roadmaps and resources was carried out and, above all, systemic aspects of electrification of industry were analysed.

Internationale Energieagentur (IEA)

Mapping of IEA TCPs

The intention of this project was to visualize the current activities of the IEA Energy Technology Network and to identify possible gaps and overlaps. The mapping includes 185 ongoing tasks and annexes (Status September 2017).

Nachhaltig Wirtschaften

Application of the Stirling cycle for environmentally compatible cooling - systems analysis

Conventional cooling has adverse effects on environment (eg. ozone depletion, global warming). One option for environmentally compatible cooling systems for near ambient temperatures (-10 to -50°C) is the Stirling cooler with environmental friendly process.

Fabrik der Zukunft

Instationarity as a limiting factor for the use of industrial waste heat in heating-networks

Industrial waste heat is predominantly instationary. Thus utilisation of industrial waste heat in district heating systems is constrained. A database and an evaluation methodology were developed to support increased utilisation of this heat source.

Haus der Zukunft

Recommendations for a consolidated Austrian research in the topic of "Smart Cities"

Based on a clear definition of the topics and focusing on energy relevant aspects the project will provide an overview on the present points of focus in research on "Smart Cities". Furthermore, future research topics will be defined and evaluated, and action plans for political stakeholders will be elaborated in the framework of two expert workshops.

Fabrik der Zukunft

Entwicklung eines marktfähigen Biopolymers auf Stärkebasis aus östereichischen Rohstoffen

Entwicklung eines thermoplastischen Biopolymers auf Stärkebasis zur Substitution von Massenkunststoffen in Nischenanwendungen. Bildung eines Firmennetzwerkes zur wirtschaftlichen Umsetzung von biologisch abbaubaren Produkten aus nachwachsenden Rohstoffen.

Fabrik der Zukunft

Wood Plastic Composites - Neue Wertschöpfung aus Holzspänen

Systematische Untersuchung einer neuen Werkstofffamilie, welche aus Abfallstoffen der Holzindustrie, nämlich den Holzspänen, in Verbindung mit geringen Mengen an thermoplastischen Polymeren (Polyolefine, 5-40%) hergestellt werden. Sie haben holzähnlichen Charakter, können aber mit Fertigungstechnologien der Kunststoffindustrie verarbeitet werden.

Stadt der Zukunft

Wirkungen der grünen Stadt

Studie zur Abbildung des aktuellen Wissenstands im Bereich städtischer Begrünungsmaßnahmen

Energiesysteme der Zukunft

LICHTSTRASSE Oststeiermark - Konzeption eines innovativen Dienstleistungsbündels zur Energieeffizienzsteigerung kommunaler Straßenbeleuchtungsanlagen

Erleuchtung oststeirischer Straßen durch bedarfsgerechtes Dienstleistungsbündel: Quick-Checks.Energie-Monitoring.Best-PractiseKatalog.Benchmarking.Exkursionen. Informationen.Schulungen.INFO-Point.Begleitprozess. Steirischer SBL-Kongress. Handbuch. Kostenkalkulator.Contracting.Vorbereitung Musterregion energieeffiziente Straßenbeleuchtung.

Fabrik der Zukunft

Development and optimization of a parabolic trough solar collector for generation of process heat for industrial processes

Development and optimization of a parabolic trough solar collector for generation of process heat for industrial processes. The operating performance and optimization possibilities of a prototype were evaluated and an improved prototype was tested with respect to its efficiency characteristics as well as in a small-scale application with a realistic load profile.

Fabrik der Zukunft

Raise in efficiency due to optimized waste heat management in heat intensive processes of the metal-working industry

This project drives at optimizing the energy input at the manufacturing process of oil tempered spring steel. This aim is met by investigating different options of waste heat recovery from industrial furnaces and heat insulation of heat treatment bathes. Besides, options of lead removal from anthracite will be listed.

Internationale Energieagentur (IEA)

IEA IETS Task 17: Membrane processes in biorefineries (Working period 2023 - 2025)

Biorefineries are essential for the transition from petroleum- to a biobased industry. The use of biomass as raw material for recyclable materials, chemicals and energy sources is essential and requires efficient and sustainable production processes. This project aims to strengthen national and international know-how transfer between research and development for membrane-based processes in biorefineries. The focus is on application, improvement and innovation in all aspects of membrane distillation.

Fabrik der Zukunft

Personal Power Plant

The application of PEM fuel cells is limited to certain singular products. The reason for this are the relatively high prices for the components of a PEM fuel cell. It is the aim of this project to fabricate the components of a PEM fuel cell by using mass production technologies such as injection moulding. In sequence this will lead to wide-spread applications of PEM fuel cells (personal-power-plant).

Fabrik der Zukunft

Development of miniaturized, ceramic high-temperature fuel-cell-components using resources-perserving mass-production processes

The application of nano scaled powder and powder injection moulding (PIM) for energy efficient co-sintering of miniaturized solid oxid fuel cells which can produce current and heat by using renewable raw materials.

Fabrik der Zukunft

Wood Plastic Composites - Direktextrusion

Entwicklung einer Holzspänedirektdosierung