Suchergebnisse für "Factsheet: Energietechnologien gestalten, die für alle sinnvoll und nutzbar sind"

Fabrik der Zukunft

Resource-saving and sustainable production of high-quality steel by enhanced on-line control of stirring efficiency in vacuum degassing (SUSPRISE Joint Call)

For vacuum degassing of liquid steel, as it is used for production of high quality steel grades, an improved on-line monitoring and control system will be developed and applied. Thus the reliability of the vacuum degassing process will be improved, and simultaneously the consumption of energy and resources will be reduced.

Stadt der Zukunft

Cool Windows - Windows with shading optimising the trade-off between summery overheating, wintery heat protection and adequate illumination

Windows with their associated components such as sun and glare protection are optimised as a holistic building equipment unit regarding different seasonal requirements in light of the climate crisis. The results serve as a basis for new developments in the window and shading technology in order to provide summery and wintery heat protection as well as adequate natural illumination over the year.

Stadt der Zukunft

Sol4City - Integrated solar supply concepts for climate-neutral buildings for the "city of the future"

Intelligent technology coupling to achieve high solar coverage of the buildings (multi-storey residential building) heat and electricity demand. At the end of the project, integrated energy supply concepts for multi-storey residential buildings based on high network interaction and flexibility potential, maximum surface efficiency of conversion technologies on site and high economic competitiveness are available for the broad applicability in the "City of the Future".

Stadt der Zukunft

HotCity - Gamification as a possibility to generate data for energy-oriented neighbourhood planning

The aim of the project was a functional test to determine whether an up-to-date data set of energy-oriented data can be collected for neighbourhood planning through gamification, cost-efficiently, quickly and reliably. This had been determined using the example of the potential determination of industrial and commercial waste heat sources in Vienna and Graz.

Stadt der Zukunft

Probing for PV façade systems made of lightweight plastic modules with reversible fittings for new and old buildings (PV-FAS_light + easy)

Probing for a new, simple, cost-effective and building-integrated PV facade system made of plastic PV modules through initial investigations for fixing technology, for building physics, for fire protection and for electrical engineering concerning the usability, the areas of applicability and the yield and application potentialfor new buildings and for existing buildings.

Nachhaltig Wirtschaften

Hemp Ski, Recyclable ski manufacturing from hemp, bio-resin and waste streams

In industrial production for alpine skis, epoxy resins of fossil origin and pre-impregnated glass fiber reinforcements are processed today. Innovations that replace environmentally critical materials in skis with biogenic substitute materials with an improved environmental balance have so far been limited to the production of small series. This circumstance motivated the consortium to develop a solution for a circular bioeconomy with the HempSki project, which will also make industrial ski production from renewable raw materials and waste streams possible in the future.

Stadt der Zukunft

Eco.District.Heat - Potentials and restrictions of grid-bound heating systems of urban areas

Aim of the project Eco.District.Heat is to provide strategic decision-making support that enables Austrian towns and cities to deal with aspects of grid-bound heating (and cooling) systems in accordance with integrated spatial and energy planning from a holistic perspective when elaborating urban energy concepts.

Stadt der Zukunft

EnErGy Plant Weiz - Renewable energy community Business Park Energy Lane and Factory Lane Weiz

Based on the results of the exploratory study project REC-Businesspark, a demonstrator for a "renewable energy community business park" is to be developed in Weiz. The focus is on the development of innovative operating and tariff models for a redox flow storage system that is integrated into a renewable energy community.

Haus der Zukunft

PESI - Paradigm shift in urban energy systems through synergies with industry

Analysis of different options for the use of industrial surplus energies of various shapes (waste heat, waste water, waste) and renewable energy sources in the industrial sector (e.g. solar panels on roof surfaces) in adjacent urban areas, which act as an "energy sponge". Based on real consumption and availability data, a simulation model was created and opportunities for synergies were documented.

Stadt der Zukunft

Building as living lab - Buildings as a living lab for climate-neutral, needs-based and affordable housing

Within ÖWG, climate protection and sustainability are strategically anchored in renovation and densification projects. A comprehensive, climate-neutral renovation concept had been developed for a specific pilot property in Graz in an open, co-creative innovation process. The building becomes a living lab in which new solutions are tested in the everyday lives of the residents.

Klimaneutrale Stadt

Climate neutral Wiener Neustadt 2040

Wiener Neustadt wants to develop its own vision and implementation strategy for climate neutrality by 2040 and develop it in four steps.

Internationale Energieagentur (IEA)

IEA HPT Task 41: Cold Climate Heat Pumps

The aim was to increase the efficiency of outdoor air heat pumps in cold climates in locations with low outside temperatures of up to -25°C. Newly developed heat exchanger concepts were tested and optimized regarding their icing behaviour. Different circuit modifications were modelled and simulation studies for low ambient temperatures were carried out.

Haus der Zukunft

DAKTRis - Dynamic operational behaviour of absorption chillers in Trigeneration Systems

In the present project an absorption chiller will be adapted to meet the specific requirements necessary to integrate it with the CHP unit. By means of hardware-in-the-loop measurements and dynamic system simulations, different system configurations and control strategies will be analysed under dynamic boundary conditions, optimized and evaluated.

Nachhaltig Wirtschaften

DiRecT – Direct recycling and upcycling of titanium chips

In the project DiRecT, different new technologies will be developed and evaluated which make it possible to directly recycle the chips generated in the manufacturing process of high-quality titanium products or to produce directly from the chips near-net-shape components or improved semi-finished products (upcycling).

Internationale Energieagentur (IEA)

IEA DHC TS5 - Integration of Renewable Energy Sources into existing District Heating and Cooling Systems (RES DHC)

The expansion of sustainable district heating/cooling is an essential part of the Austrian heat transition. The transformation of these supply systems to fully renewable systems requires the combination of a multitude of aspects. The aim of the project is to compile a data and knowledge base from international projects in this context. Expertise and process know-how for the process of implementing the transformation of district heating and cooling systems will be collected and processed.

Internationale Energieagentur (IEA)

IEA DHC Annex XIII Project 02: MEMPHIS 2.0 - Advanced algorithm for spatial identification, evaluation of temporal availability and economic assessment of waste heat sources and their local representation

The identification and integration of waste heat sources is a key measure towards the decarbonisation district heating networks (DHN). Aim of MEMPHIS 2 is to develop an improved algorithm for identification of different current and future waste heat sources; including time relations of the heat emitted and techno-economic details as well as the further development of the online waste heat explorer.

Internationale Energieagentur (IEA)

IEA DHC Annex XIII Project 07: CASCADE - A comprehensive toolbox for integrating low-temperature sub-networks in existing district heating networks

The majority of urban district heating networks operate at high temperatures, which are a barrier to the efficient integration of heat sources such as solar, geothermal, ambient or low temperature waste heat. CASCADE is investigating the integration of low-temperature networks into the return pipe of existing district heating networks, which will reduce return temperatures and thus improve efficiency and increase its capacity to connect new customers.

Internationale Energieagentur (IEA)

IEA EBC Annex 64: Optimised Performance of Energy Supply Systems with Exergy Principles (Working period 2014-2018)

To reduce CO2 emissions in cities, an overall understanding of energy conversion processes is necessary, which also takes temperature levels into account. This is particularly important when alternative heat sources such as waste heat, ambient heat, solar and geothermal energy are to be used, as these often have a low temperature level, i.e. a low exergy content. Accordingly, urban energy systems are analysed and optimised within the framework of the IEA EBC Annex 64 with the help of the exergy approach.

Internationale Energieagentur (IEA)

IEA-SHC Task 66: SOLAR ENERGY BUILDINGS - Integrated solar energy supply concepts for climate-neutral buildings and communities for the "City of the Future”

The energy supply for climate-neutral buildings is based on holistic system concepts that achieve high renewable fractions by intelligently combining technologies, sector coupling, high grid interaction and flexibilization measures. The Solar Energy Buildings Task supports exactly this development. The objective is to identify relevant stakeholders and their needs, to develop a technology portfolio and optimised integrated energy concepts and to give recommendations to policy makers and energy-related companies.

Haus der Zukunft

Pallets never pall - Development of the Pallet House to series-production readiness

The winning project "Pallet House" of the EU-wide competition GAU:DI in 2007 consists of 800 (used) pallets. It has been exhibited in a scale 1:1 at the Biennale in Venice 2008 and has been developed for mass production within this project. Therefore, two exemplary scenarios were developed: (temporary) construction at Vienna's Urban Lakeside in Aspern and the construction of a low-cost building in South Africa.