Suchergebnisse für "Factsheet: Energietechnologien gestalten, die für alle sinnvoll und nutzbar sind"
IEA EBC Annex 61 Subtask C Report: Deep Energy Retrofit Pilot Projects (2017)

Der Bericht gibt einen Überblick über 7 umgesetzte Sanierungsprojekte in den Teilnehmerländern bei denen hochwertige Sanierungsmaßnahmen in Kombination mit innovativen Geschäftsmodellen umgesetzt wurden.
Cyrus Nasseri, Lohse Rüdiger, et al.
Herausgeber: New Buildings Institute (NBI)
Englisch, 132 Seiten
Downloads zur Publikation
ReAssuRe – risk management for re-use of construction components and building technology by non-destructive on-site testing procedures
Risk assessment and insurability is essential for the re-use of functional components in buildings. In the best case, properties of components can be examined before they are removed from the donor building. ReAssuRe identifies suitable on-site testing procedures and establishes a network for the quality assurance of re-use components.
IEA SHC SOLARUPDATE Vol.66, December 2017
Das SOLARUPDATE Vol.66, Dezember 2017 ist der aktuelle Newsletter des IEA SHC "Solares Heizen und Kühlen".
IEA Bioenergy Task 32: Newsletter Vol. 2/2017

Der Newsletter beinhaltet aktuelle Informationen zu Forschung, Implementierung und politischen Maßnahmen sowie Veranstaltungshinweise.
Christoph Schmidl
Herausgeber: bioenergy2020+
Deutsch, 4 Seiten
Downloads zur Publikation
Produktbezogene Umweltinformationssysteme (PUIS)
Das Handbuch "Produktbezogene Umweltinformationssysteme (PUIS) in Theorie und Praxis" ist ab sofort online verfügbar.
Energiewerkstatt Nördliches Waldviertel

Ein kommunales "integriertes" Energieprogramm - durch Forschungskooperation zur erfolgreichen Umsetzung
Forschungsforum
1/1996
Herausgeber: BMVIT
Deutsch, 6 Seiten
Downloads zur Publikation
Langzeitevaluierung des Energieverbrauchs von 100 energieeffizienten Gebäuden in Österreich als repräsentativer Querschnitt österreichischer Leuchtturmobjekte (LZE 100 Leuchtturmobjekte)

Erfassung, Auswertung und Analyse von Energieverbrauchsdaten von 100 energieeffizienten Gebäuden in Österreich über eine Betriebszeit von 3 bis 25 Jahren als repräsentativer Querschnitt der österreichischen Leuchtturmobjekte. Differenzierung nach Gebäudetypen, Energieträger und Ermittlung der realen Treibhausgas-Emissionen. Vergleich der gemessenen Verbräuche zu Benchmark-Werten.
Schriftenreihe
24/2022
T. Roßkopf-Nachbaur, G. Lang, M. Ploß, M. Lang, A. Peter, T. Hatt
Herausgeber: BMK
Deutsch, 143 Seiten
Downloads zur Publikation
INABE

Entwicklung einer ganzheitlichen Bewertung der Aktivitäten
von Unternehmen auf Nachhaltigkeitsrelevanz und Praxistest
in führenden Industriebetrieben
Schriftenreihe
39b/2005
A. Windsperger et al.
Herausgeber: BMVIT
Deutsch, 167 Seiten
Downloads zur Publikation
IEA SHC Task 68: Konferenz EuroSun 2022 Beitrag "Fault Detective - Automatic Fault Detection for Solar Thermal Systems based on Artificial Intelligence" (2022)

Präsentation im Rahmen der Konferenz EuroSun 2022 in Kassel, Deutschland.
Lukas Feierl, Thomas Bolognesi, Viktor Unterberger, Manuel Gaetani, Bernhard Gerardts, Claudio Rossi
Herausgeber: SOLID Solar Energy Systems GmbH
Englisch, 2 Seiten
Tage des Passivhauses stießen auf großes Interesse
Über 5000 Besucher stürmten 110 "Haus der Zukunft"-Demogebäude und Passivhäuser in ganz Österreich.
TheSIS - Thermal renovation with internal insulation systems - investigation and development of moisture-proof solutions
Development of innovative solutions for the retrofit of the building envelope with internal insulation with a focus on the hygrothermal optimization of a moisture-adaptive vapor retarder in form of a paint coating. As a result, the moisture hazard related to the implementation of internal insulation systems is reduced and the energetic, comfort-related and economic advantages are made available.
(BIO) Gas - Inseltankstelle

"Integration einer Gasaufbereitung und einer (Bio)-Gastankstelle im Inselbetrieb in eine bestehende Biogasanlage"
Schriftenreihe
52/2009
H. Bala, M. Harasek, M. Miltner, S. Hiller
Herausgeber: BMVIT
Deutsch, 88 Seiten
Downloads zur Publikation
AnergieLeichtGemacht - Development of Scalable Implementation Models for Geothermal Anergy Networks to Decarbonize the Building Sector
The project develops standardized technical, organizational, and financial implementation models for anergy networks to enable sustainable heating solutions in cities and municipalities. By identifying suitable settlement typologies, analyzing existing framework conditions, and engaging stakeholders, scalable solutions are created. The goal is to reduce planning and implementation barriers and facilitate investments in local anergy networks.
FluccoSan - Circular energy flexibility for resilient, climate-neutral refurbishments
FluccoSan aims to develop innovative and cost-effective refurbishment solutions for the building sector that contribute to achieving the Austrian federal government's climate targets. The focus is on energy-efficient, minimally invasive and socially acceptable measures, so-called “dynamic renovations”. By integrating the circular economy and social science research, these solutions should ensure long-term sustainability and a high level of acceptance among users. Status: ongoing
The Potential and Challenges of Drop-in Biofuels 2014

Der Bericht beschreibt den Stand von Drop-in Biofuels, deren Potentiale und mögliche Hürden.
Herausgeber: IEA Bioenergy Task 39
Englisch, 199 Seiten
Fachtagung: 2. Symposium Energie Plus Gebäude
29. März 2012
Landesmesse StuttgartStuttgart, DE
Fachtagung im Rahmen der CEP® CLEAN ENERGY & PASSIVEHOUSE
Energieforschungsausgaben im internationalen Vergleich 2018

Anteil und Entwicklung der Ausgaben der öffentlichen Hand in den Mitgliedstaaten der Internationalen Energieagentur (IEA).
Schriftenreihe
19a/2019
A. Indinger
Herausgeber: BMVIT
Deutsch, 10 Seiten
Downloads zur Publikation
IEA-EBC Newsletter issue 62, November 2015
Der Newsletter stellt aktuelle Aktivitäten des IEA-EBC-Programms und Trends im nachhaltigen Bauen vor.
Wood Plastic Composites - New property profile by refiner fibres
The mechanical properties and thus the application area of wood plastic composites with a wood content > 60 % shall be explicit increased by means of long wood fibres. The realization of a technological direct feeding system in extrusion process will enable an innovation jump of this wood like material.
Maize Cob Board (MCB) - Light weight material from agricultural by-products
Maize cobs accrue as an agricultural by-product can be used for a core material of light weight panels with good material properties and insulation characteristics. The aim was to work out a concept for the production and optimisation of material properties.