Suchergebnisse für "Factsheet: Energietechnologien gestalten, die für alle sinnvoll und nutzbar sind"
Energetic building refurbishment in protection zones
Standardized solutions as a help and guideline for building-owners, authorities and companies
NNATT - Sustainable use of excavated materials from civil engineering and tunnelling using sensor-based technologies
The holistic system developed in the NNATT project for the sustainable utilisation of excavated materials starts with the geology and extends through the construction process to recycling. With the help of sensor-based real-time analyses and an AI-supported decision matrix, excavated materials are separated and further developed into customised products.
Guideline for logistic systems and resource management for renewable resources in Burgenland
The project on hand is applied in the Austrian federal state Burgenland. It investigates possibilities to cover the future biomass demand of the county with resources from the county.
ecoRegeneration: Development of a "Merit-Order" in order to assess regeneration heat for geothermal probes within urban residential neighbourhoods
In urban residential areas there are not enough active-cooled usages, to use the waste heat of the cooling process as required regeneration heat for geothermal probes; free cooling of the apartments is not sufficient. The project is developing various options (waste heat from commercial uses in the ground floor zones of residential buildings, by using waste heat of data centres, additional installation of heat generation systems for regeneration) within the urban settlement area, business models and is calculating life-cycle-costs of all solutions. The result should be a kind of "merit order" for regeneration heat.
Product service systems without risk (RISP)
In RISP a process model for the development of product-services is worked out, which consists of seven steps and so called "gates" between the single steps. The questions which have to be answered before entering the gates to the next step are derived from a failure mode and the effect analysis of the single steps.
Cooperative Living Volkersdorf (KooWo - Volkersdorf) - sufficiency, space and energy efficiency in the quarter
The jointly planned demonstration project "KooWo" in Volkersdorf aims at reaching sufficiency as well as energy and CO2 reductions in a holistic way. System boundaries are shifted in order not to look only at energy consumption in buildings, relating to unit of floor space, but to consider all use of resources and relating it to persons and social communities.
see-it - Camera based, user centric daylight control system for optimized working conditions
In the project technologies in the field of building construction and building automation are being researched for quality and performance improvements in the workplace. The aim is to individualize the control of sun protection to the people who need to be protected from glare and overheating and hope to see through.
Smart Pölten 2.0 Holistic view on a Vertical Farm in preparation for a demonstration project for the city of St. Pölten
The city of St. Pölten forsees great potential in Vertical Farming with regard to the objectives related to the concept of the Smart City program - linking local food production, quality of life by reducing resource consumption. This has to be evaluated by combining Vertical Farms with existing living buildings. Eco-social and socio-economic considerations play an important role in this process.
Scenario assessment for the economic market potential of relevant energy technologies.
Economic analyses and scenarios for the future relevance of various sustainable energy technologies considering interaction of technologies, learning effects and exogenous scenario parameters. Recommendations for the future orientation of research and technology development.
Clay - Passiv Office-Building Tattendorf
The motivation for developing the project "Clay Passiv Office-Building Tattendorf" was the dissatisfaction with the situation of a great difference in the state of technology in three fields relevant to the research project: 1) sustainable production of energy , 2) sustainable energy conservation technologies and 3) use of sustainable building materials.
Transfer of technology and know-how for the initiation of fermentation gas net feed-in pilot projects.
Target group communication of the technical possibilities of fermentation gas net feed-in. Information preparation and reduction in planning complexity. Support and networking of potential future plant operators. Establishing a service office as contact point.
Sani60ies - Demonstration of minimally invasive thermal and energetic refurbishment of classic 1950s and 1960s apartment buildings
System development of a façade-integrated building component activation for "warm" refurbishments with high transfer potential to buildings of classic apartment complexes from the 1950s and 1960s. The system is being tested and further developed based on three building projects and demonstrated through broad application (over 200 flats).
LOW TECH innovation-lab - real laboratory for the transformation to climate and resource-saving energy regions with innovative LOW TECH solutions
LOW TECH innovation-lab aims to set up an innovation laboratory in which innovative model solutions are developed, tested and widely rolled out in cooperation with suitable pilot regions on the basis of an optimized approach with regard to the use of technology on the one hand and the potential of the circular economy, local environmental resources and social innovations on the other.
Integration of results of the program "Building of Tomorrow" into the established qualification program of energy counsellors and their daily consultancy activities
Preparing the results of the "Building of Tomorrow" program for energy counsellors by elaborating a material collection and integrating it into the basic education of energy counsellors. Furthermore a one-day training course for already active energy counsellors will be designed and held.
Heat in containers
Storage of industrial waste heat in latent heat storage systems (common transport containers). Use of the heat in commercial enterprises and public or private buildings with integration of conventional energy suppliers. Technical and financial feasibility study.
Solar Assisted Heating Networks
An investigation of the economic and ecological usefulness of coupling two CO2 neutral energy sources; solar installations for multi-family houses, producing standardised systems concepts and planning guidelines.
Industrially produced residential dwellings
Potential of future development for industrially produced residential dwellings Enquiry on international tendencies in automated manufacturing and assessment of viable strategies for their implementation into the Austrian building sector
The Box - Thermal High Performance Decoupling - Next Generation Thermal Break Technology
The project pursues the overall strategic objective "solution of the problem-inducing heat bridge". For this purpose, the thermal bridging losses should be reduced by the factor of 15 in contrast to the state of the art. The significant increase in efficiency should rely on existing system solutions, but incorporating a new holistic view in terms of construction, geometry and materials.
Circular Twin - A Digital Ecosystem for the Generation and Evaluation of Circular Digital Twins
By 2030, more than the equivalent of two Earths will be needed to meet the demand for natural resources, therefore a transition to circular systems is essential, especially in the construction industry. The digital "Circular Twin" ecosystem enables the early implementation of circular economy goals as well as end-to-end digitalization in construction utilizing Digital Twins, Generative Design Algorithms and Virtual Reality.
Distributed generation and renewables - Power Quality
The project will demonstrate how the integration of power electronics equipment in Distributed Generation (DG) units can actively improve the stability and quality of supply of electric power distribution networks in order to increase the penetration of DG and Renewable Energy Sources.