Suchergebnisse
SOLROSE FP - bionisch designter Solarkollektor, finale Produktgestaltung
Ziel war es den innovativen solarthermischen Kollektor SOLrose vom Prototypen zu Serientauglichkeit fertig zu entwickeln. Verbesserungen SOLrose gegenüber Stand der Technik: Ansprechendes Design auch für Fassadenintegration, Serienproduktion der Systembausteine, Verbesserungen für Vertrieb und Montage.
Sunny Energy Building: ENERGYbase - Bürohaus der Zukunft
Mit der Errichtung dieses zukunftsweisenden Kompetenzzentrums für Erneuerbare Energie setzt der Wiener Wirtschaftsförderungsfonds (WWFF) neue Maßstäbe bei der Entwicklung Energie optimierter Büroimmobilien. Auf 7.500 m² stehen Unternehmen sowie Forschungs- und Bildungseinrichtungen aus dem Zukunftsbereich der Erneuerbaren Energien modernste Büroflächen zur Verfügung.
City Cooling - Intelligente Fernkälteversorgung Wien
Konzeptentwicklung für eine intelligente Fernkälteübergabe und alternative Rückkühlung von zentralen Groß-Absorptionskälteanlagen am Fallbeispiel des Wiener Stadtteils TownTown
AnergieUrban Leuchttürme: Rechtliche, organisatorische und wirtschaftliche Rahmenbedingungen für Anergienetze mit Erdsonden im urbanen Raum anhand konkreter Pilotprojekte
Für die Umsetzung der Energiewende gemäß der österreichischen Klimaziele bedarf es neuer Lösun-gen für die Bereitstellung von Heizwärme und Warmwasser in der bebauten Stadt. Die aktuellen geo-politischen Rahmenbedingungen unterstreichen die Wichtigkeit eines raschen Umstiegs auf eine nachhaltige, unabhängige Energieversorgung. Die Nutzung lokal verfügbarer, erneuerbarer Wärme-quellen in Verbindung mit saisonalen Erdspeichern stellt eine Lösung zur nachhaltigen Heizung und Kühlung von Gebäuden dar.
Schriftenreihe
46/2022
G. Bayer, B. Pfefferer, G. Götzl, M. Fuchsluger, A. Schriebl, S. Hoyer, R. Kalasek, T. Brus, J. Zeininger
Herausgeber: BMK
Deutsch, 127 Seiten
Downloads zur Publikation
Energy-storage concrete: Thermal Component Activation
This planning guide provides information on the option of solely heating and cooling small-volume residential buildings by means of thermal component activation (TCA). Concrete instructions on the planning of residential buildings with thermally-activated ceilings are also provided.
Felix Friembichler, Simon Handler, Klaus Krec, Harald Kuster
Herausgeber: BMVIT
Englisch, 122 Seiten
Downloads zur Publikation
PEAR – Test facility for energy efficient automation and control of buildings
The energy demand calculated in the design phase often differs from measured values in the actual building operation. This projects reviews building automation and operation by presenting a solution how to assess energy efficiency of control strategies in the fields of air conditioning systems, concrete core activation and free cooling. The results are implemented in the demonstration building "Post am Rochus".
ARIS - Application of non-linear control engineering and implementation of intelligent sensor systems for the improvements of energy efficiency in the building sector
The major goal of the project was the development of innovative control concepts for controlling and optimizing heating, cooling and ventilation systems (HVAC) as well as building loads. The implementation of advanced, energy efficient non-linear control techniques in building management systems is supported by new sensor technologies that are applied to building and energy systems in order to improve their energy-efficient operation.
SaLüH! Renovation of multi-family houses with small apartments, low-cost technical solutions for ventilation, heating and hot water
New innovative concepts for heating and ventilation were investigated. Very compact heat pumps are developed in such a way that it will be possible to integrate these units into the window parapet or into a prefabricated timber façade.
EnerPHit-green concept Modernisation of a historic building with application of an aerogel insulation plaster
This demonstration project shows the comprehensive modernization of a historic building within the constraints of a regional protection zone. By using the Aerogel high-performance insulating plaster, a comprehensive energy-efficient building refurbishment had been realized without changing the outer appearance of the façade.
SocialLowCostFlex - Collaborative flexible low-cost energy supply concepts for social housing
This project aimed for feasible low-cost solutions, which allow residents of multi-party houses, with special focus on social housing to profit and participate in the energy transition process and associated trends (e.g. community generation units, exploitation of flexibility). The results of the project are low-cost concepts and business models of community generation units and utilization concepts, tested for their feasibility in a social housing complex. These concepts are based on special requirements of different lifestyles in low-income households and take the framework of social housing such as tenant fluctuation into account.
FiTNeS - Facade integrated modular Split-heat pump for new buildings and refurbishment
The goal of FitNeS was the development of modular split heat pumps with compact and silent façade-integrated outdoor units for heating and domestic hot water preparation (and optionally cooling in combination with PV). The outstanding features of the concept are a modular design with a high degree of prefabrication and representing a visually and architectonically attractive, economic and sustainable solution for both new constructions and renovations. One of the main development goals is the minimization of sound emissions by means of optimized flow control.
OptiMAS - Optimization of building energy efficiency through model-based energy flow analysis with non-invasive sensors
Using a model-based energy flow analysis supported by non-invasive sensor technologies OptiMAS investigated how to monitor, analyze and optimize existing buildings independent of the installed HVAC systems and automation components. With the OptiMAS approach the optimization potential of individual buildings up to entire areas can be detected, located and tapped by adjustment of system parameters to ensure highest energy and resource efficiency.
GEMA – Assessment of the performance of energy-efficient demonstration buildings
In GEMA, the project team will study and analyse the energy consumption of at least 10 commercial and residential buildings in Austria, which include innovative technologies or concepts for minimising their energy requirements. The results will allow for the potential optimal performance in terms of energy, environmental and social indicators of buildings in future construction projects.
Evaluation of solar-thermal energy stores using a uniform and marketable system of characteristic numbers
Comparison of solar-thermal energy stores A clear and uniform system of characteristic numbers enables a cost-saving comparison of the efficiency of solar-thermal energy stores of different technologies for the first time and gives important impulses for the market.
Energy relevant and ecological monitoring studies of demonstration buildings, which were built in the framework of the program "Haus der Zukunft".
Energy relevant and ecological monitoring studies of demonstration buildings, which were built in the framework of the program "Haus der Zukunft". The user acceptance should also be levied and displayed
Solarenergie Urban - Analysis and evaluation of the economic, energetic and architectural quality of urban solar energy buildings
This project developed energetic and economic optimised planning criteria for multi storey residential buildings for the integration of renewable energy systems in the building shell. The field of new construction and refurbishment had been investigated.
thermocollect: realisation of a plus energy building by a solar active facade system
The project demonstrates the application of a solar active facade system in the course of the renovation of an existing building in order to achieve the plus-energy standard. Moreover, the effectiveness of the system will be demonstrated on new buildings and transparent components as well. The final outcome will be a manual for the application and implementation of the façade system focusing on the segment of specialists and skilled labour.
Reduction of cooling requirements through optimized urban structures and processes and design optimisation in building design (smartKB*)
Based on a systematic listing of appropriate methods, recommended actions have been developed to reduce the cooling requirements in new or renovated buildings on three levels: a) optimization and use of appropriate urban structures, b) design strategies and passive measures for building concepts, c) reduction of cooling requirements through integrated planning processes.
ChristophorusHouse(CHH)
Multifunctional building in passive house standard - The building was designed as innovative high-quality passive house (wood construction) with the latest ecological building automation as a pilot project which is multipliable in a reduced respectively altered form in Europe as well as overseas.
Sol2Pump - High efficient combination of solar thermal plants, photovoltaic and heat pumps
Targeting a high level of decentralised energy supply on basis of renewable energy, the project analysed the possible combinations of solar thermal energy, photovoltaic and heat pumps. The project aimed to maximise the domestic energy supply due to utilisation of the building as short term energy storage. In addition to that, several optimisation measures had been developed. The impact on the energy supply and demand will be economically assessed through life cycle costing. On this basis, the potential load transfer and the use of this kind of systems had been evaluated in combination with smart grids.