Suchergebnisse für "Factsheet: Energietechnologien gestalten, die für alle sinnvoll und nutzbar sind"
Development of miniaturized, ceramic high-temperature fuel-cell-components using resources-perserving mass-production processes
The application of nano scaled powder and powder injection moulding (PIM) for energy efficient co-sintering of miniaturized solid oxid fuel cells which can produce current and heat by using renewable raw materials.
Increasing of the resources-efficiency by experimental optimisation of steam production and by reduction of production residues in a metal-processing factory
The project is based on the results of the currently running project "Use of waste heat and renewable energy sources in a metal-processing factory". In this project it was found, that nearly the half of the consumption of natural gas is needed for steam production. Based on calculations already carried out, it is planned to investigate experimentally the possibilities of increasing the resource-efficiency by lowering the steam temperature and by replacing steam by hot water. Further increasing of resource-efficiency shall be achieved by use of internal residues as an additional fuel in a solid fuel furnace.
Multifunctional Energy Centre Kötschach-Mauthen - model-system to achieve energy-self-sufficiency
Development of concepts for a multifunctional Energy Centre (biomass district heating und biogas polygeneration for the supply of heat, electricity, process heat, cooling and biofuels) and for a "Öko-Energietourismus" for the community of Kötschach-Mauthen on the way to energy-self-sufficiency
Transfer of results of the program "Factory of Tomorrow" into the target groups of energy managers and energy consultants
Transfer of results of the program "Factory of Tomorrow" with respect to energy efficiency and increased adoption of renewable energy technologies into the target groups of internal energy managers and external energy consultants. The transfer activities include carrying out a one-day-seminar twice and the preparation of freely available training materials.
New solvents and processes for post-combustion CO2 capture
New and better solvents for CO2 absorption can reduce the costs of Carbon Capture and Storage significantly. Therefore, the ability to absorb CO2 and the vapour - liquid equilibrium curve of different new solvents will be determined in the laboratory and under real operating conditions at a power plant. Furthermore, the achievable CO2 removal efficiency of spray towers will also be investigated for different solvents.
Sustainable energy supply: Production and import of biomass and bio fuels
The project gives an overview of the supply and demand for biofuels specifically dealing with the situation in Europe and that in threshold and developing countries using case studies as examples. Cases: Sweden and France as importing countries in the EU, and Senegal as a (potential) exporting nation.
Development of a solid-wood-passivehouse-window
Based on experience with low-energy-windows, a solid wood window is being developed, which meets passivehouse-standards.
IEA-SHC Task 45, A-D4: Deliverable A-D4:"Guidelines for requirements for collector loop installation including precautions for safety and expansion"
Im Zuge der Betrachtung der Sicherhheitstechnik werden Möglichkeiten und Maßnahmen im Umgang mit Stagnation und Stagnationsvermeidung diskutiert. Es werden aktuelle Lösungen im Bereich Sicherheitstechnik solarthermischer Großanalgen vorgestellt und ein Überblick zur Ausfertigung
des Primärkreises auf Basis realisierter solarthermischer Großanlagen gegeben.
Samuel Knabl, Christian Fink, Philip Ohnewein, Franz Mauthner, Robert Hausner
Herausgeber: AEE - Institute for Sustainable Technologies (AEE INTEC)
Englisch, 40 Seiten
IEA IETS Task 18: Digitalization, Artificial Intelligence and Related Technologies for Energy Efficiency and GHG Emissions Reduction in Industry (Working period 2023 - 2024)
The work in Task 18 enables the exchange of experience and knowledge between industry and research institutions from different countries. Through this cooperation best practices are identified and disseminated to promote the implementation of energy-efficient technologies in industry. In the medium and long-term, this contributes to reduce energy consumption and greenhouse gas emissions of industry.
IEA IETS Annex 18: Digitalization, artificial intelligence and related technologies for energy efficiency and reduction of GHG emissions in industry
Annex 18 Task 2 provides an overview of the methods, applications and requirements of digital twins in different industrial sectors. The focus is on relevant solutions for improving energy efficiency and reducing GHG emissions. The potential of these solutions is evaluated and business cases and recommendations for action are developed. The interdisciplinarity and the international consortium enable the development of a network of experts from research and industry.
Innovative Energy Technologies in Austria - Market Development 2017
Biomasse, Photovoltaik, Solarthermie, Wärmepumpen und Windkraft
Schriftenreihe
4/2018
Peter Biermayr, Christa Dißauer, Manuela Eberl, et al.
Herausgeber: BMVIT
Deutsch, 257 Seiten
Downloads zur Publikation
Modernizing by Catalogue
Façade and Open Space Modernization with Standard Building Components in Housing of the Fifties und Sixties.
EBC Annex 66 Text: Definition and Simulation of Occupant Behavior in Buildings
Hintergrund, Ziele und Methoden des EBC Annex 66. (November 2014)
D. Yan, T. Hong
Herausgeber: IEA EBC Annex 66
Englisch, 14 Seiten
Downloads zur Publikation
Shutdown factory - Central control and communication system and overall concept for a reduction of energy cost and optimization of resources during the stand-by-mode of industry facilities
Development of solutions to reduce the energy cost during the stand-by-mode of industry facilities. Focus areas: innovative control and communication system for the problem of the shut down and start up, entire concept on energy savings cost during the stand-by-mode, creating awareness concerning the problem in the industry
IEA Bioenergieprogramm 2007-2009 Task 42 Bioraffinerien
Koproduktion von Treibstoffen, Chemikalien, Energie und Materialien aus Biomasse
Schriftenreihe
78/2010
G. Jungmeier et al.
Herausgeber: BMVIT
Englisch, 111 Seiten
Downloads zur Publikation
IEA 4E Annex: Electric Motor Systems. Working period 2008 - 2011
Promotion of energy efficiency of poly-phase electric AC motors and motor systems in relevant applications as pumps, fans, compressors and mechanical drives that are generally used in industry, infrastructure and large buildings. This work also included new technologies such as frequency inverters (adjustable speed drive) and permanent magnet motors.
Task 38 Roundtable (25.11.2010, 31.1.2011 & 8.4.2011)
Energetische Nutzung der forstlichen Biomasse und zeitliche Betrachtung der Kohlenstoffneutralität
Herausgeber: BMVIT
Downloads zur Publikation
Phytozid - Application of tansy extract and its ingredients as insecticides against the codling moth
Extraction of insecticidal active substances in pilot plant scale from tansy for field trials against the economically important pest codling moth (Cydia pomonella) as well as approval procedure in order to develop alternative strategies for naturally based plant protection.
Wood Plastic Composites - Development of an extrusion tool
Development of a new generation extrusion tool for a wood plastic composite. This material will be developed in a second project an should show a fiber content of 60 - 85%. Important is a high profile quality as well as a high output to ensure an economical production.
"NAWARO-Peat" - Peat replacement products by regional renewable resources
Possibilities to stop the peat usage in horticulture by using renewable resources and biological wastes which are regional available. Efficient economical as well ecological solutions for the usage of alternatives to peat, development and testing of treatment technologies which are necessary to create such a substrate in laboratory and field scale.